User's Manual

ManualsBrandsSHENZHEN MINEW TECHNOLOGIES ManualsElectronicsBluetooth 4.0 Module

TEL: +86-755-8886 8480 FAX: +86-755-2982 5342 EMAIL: sales@rfodm.com URL: www.rfodm.com

Page 1

Minew Technologies

Bluetooth 4.0 Module

Instructions V1.0

Description This module is limited to OEM Installation only.

The MS47SF1 smart module is a SMD package module basis of CC2541 chip, it is a smart module with

cost-effective, low power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE

master or salve nodes to be built with very low total bill of material costs.

The MS47SF1 smart module combines an excellent RF transceiver with an industry-standard enhanced 8051

MCU, in-system programmable 256KB flash memory, 8KB RAM, and many powerful supporting features and

peripherals. It is suitable for systems where very low power consumption is required. Very low-power sleep

modes are available. Short transmission times between operating modes further enable low power consumption.

Features

- Bluetooth low energy technology compatible

- Excellent link budget (up to 97dB)

- Enable long range applications

- Accurate digital RSSI

- Compatible with CE and FCC regulation

- High performance and low power 8051 core MCU

- Battery monitor and temperature sensor

- Samples application and profiles

- Full speed USB interface

- AES security coprocessor

Application

- 2.4GHz Bluetooth low energy systems

- Mobile phone accessories

- Sports and leisure equipment

- Consumer electronics

- Human interface devices (keyboard, mouse, remote control and etc.)

- USB dongles

- Healthcare and medical

Images

Top view Bottom view

Summary of content (5 pages)

PAGE 1
Minew Technologies Bluetooth 4.0 Module Instructions V1.0 Description This module is limited to OEM Installation only. The MS47SF1 smart module is a SMD package module basis of CC2541 chip, it is a smart module with cost-effective, low power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or salve nodes to be built with very low total bill of material costs.
PAGE 2
Minew Technologies Bluetooth 4.0 Module Instructions V1.0 Mechanical Footprint (Unit: mm) Pin Description Pin Symbol Pin Type Definition ANT Null External antenna GND Ground The ground pin should be connected to the cathode of power supply 3.3V Power The 3.3V pin should be connected to the positive of power supply P2.2 Digital I/O Port 2.2 P2.1 Digital I/O Port 2.1 P2.0 Digital I/O Port 2.0 P1.7 Digital I/O Port 1.7 P1.6 Digital I/O Port 1.
PAGE 3
Minew Technologies Bluetooth 4.0 Module Instructions V1.0 Electronic Parameters Item Test Data Remarks Operation Voltage 2.0-3.6V DC Operation Frequency 2400-2483.5MHz Programmable Frequency Error +/- 20KHz Null Modulation Q-QPSK Null Output Power 0 dBm Programmable Receiving Sensitivity -93dBm High gain mode Receiving Current 17.9mA High gain mode Transmission Current 18.2mA Transmission power 0dBm Sleep consumption 0.
PAGE 4
Host Information This module was defined to be used for specific host only. The designated host for this module was: Model: MS51PX1 Brand Name: MINEW Manufacturer: Shenzhen Minew Technologies Co.,Ltd. Address: 5 Floor, H Building, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen City, China FCC RF Exposure Requirement 1. At least 20cm separation distance between the antenna and the user’s body must be maintained at all times.
PAGE 5
the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. 6. Separate approval is required for all other operating configurations, including portable configurations with respect to FCC Part 2.1093 and different antenna configurations. 7. A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently affixed label, the module must be labelled with an FCC ID: 2ABU6-MS47SF1.