MT700 User Manual V1.0 MT700 Cat M1 & NB-IoT Asset GPS Tracker User Manual V1.0 Preface Thanks for purchasing Mictrack Asset GPS tracker MT700. This manual shows how to easily program and setup the tracker for the best results. Please read this manual carefully before using this product, so as to avoid delays or confusion with its operation. Please note that specifications and instructions are subject to change without notice to facilitate product improvement.
MT700 User Manual V1.0 Contents 1. Quickly Reference..............................................................................................................1 2. Overview...............................................................................................................................2 3. Features................................................................................................................................2 4. Applications...................................................
MT700 User Manual V1.0 FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MT700 User Manual V1.0 1. Quickly Reference Warning There is a Toggle Switch in internal(following image). Please carefully to operate it. If you use Non-rechargeable batteries, Make sure Toggle Switch to LEFT; If you use chargeable batteries, Make sure Toggle Switch to RIGHT; REVERSE IS FORBIDDEN, Could Result in Fire or Explosion. Non-rechargeable Batteries Recommendation Battery Type: Lithium Iron Disulfide (LiFeSO2) 3 x AA 1.
MT700 User Manual V1.0 2. Overview MT700 is an IP68 waterproof asset GPS tracker that uses Cat M1 & NB-IoT technology that can provide super low power consumption up to 15 years standby time powered by internal batteries. Its built-in powerful magnets, easy to install without wiring. The user can real-time track the unit via their mobile phone or PC any time anywhere.
MT700 User Manual V1.0 5. Specifications Specifications Item Dimension 88mm*62mm*34mm (3.46″ *2.44″ *1.34″) Weight 290g (10oz) Charging Mode Micro USB charging DC; Quick Charge 2A@5V (for rechargeable version only) Power Consumption <1.5uA standby current (in lowest power configuration) Backup Battery Rechargeable 3.
MT700 User Manual V1.0 7. In the box 7.1 Standard Accessories 1* MT700 Asset GPS Tracker 1* USB Charge Cable (for rechargeable version only) 1* Battery Holder (for Non-rechargeable version only) 1* Quick Start Guide 7.2 Optional Accessories 1* Car Charger 1* Power Adapter 1* USB Config Cable 8. Installation 8.
MT700 User Manual V1.0 9. Setup and Configuration For the first time to use, please connect the USB Config cable to setup the APN (CALL your sim card provider to get the correct APN) and then lock the network(base on your sim card support, please lock to CAT M1 or NB-IoT) ; After that you can setup other commands via the USB Config tool; If your sim card support SMS you can setup the unit via following SMS commands (9.1-9.12) Download the USB Config tool from the link: https://bit.
MT700 User Manual V1.0 3. Y=0 means TCP will wake-up only when report interval time is arrive; Y=1 means TCP will always connected,. 9.4.3 MODE 3 (Deep Sleep Mode) SMS Command format: MODE,3,password,T For examples: MODE,3,0000,1 Reply: SET TRACKER MODE:3 OK Note: Device will wake up and report one data to server every 1 hour, after that it will go to sleep again until next 1 hour. T is [1-24] hours. 9.4.
MT700 User Manual V1.0 9.6 SET AGPS Disable AGPS Location :190+password For examples:1900000 Reply: SET AGPS OFF Enable Last Location :191+password For examples:1910000 Reply: Reply: SET AGPS ON. 9.7 Setup Last location report Disable Last Location :192+password For examples:1920000 Reply: SET LAST VALID GPS OFF Enable Last Location :193+password For examples:1930000 Reply: Reply: SET LAST VALID GPS ON. 9.
MT700 User Manual V1.0 10. App & PC Tracking platform 10.1 App install & Login Subscribe the plan: https://shop.mictrack.com/product/gps-tracking-platform-service/ if you have subscribed the plan please ignore this step. Search “Yi tracker” in Google Play or iOS store(or scan the following QR code) to download the Mobile APP(not Yi tracker2); Choose the” Login by Device No., Input server www.trackits.com Input your device’s ID number and password(default is 123456) to login. 10.
MT700 User Manual V1.0 11. Troubleshooting Issues Caused Solutions 1>The device only reply with Cat M1 sim card and will not reply the NB-IoT SIM card 2>SIM Card have not active Send SMS to the device but no reply Please check the SIM card status and try again. 3>Card balance is not enough Text command format is wrong Please check the command format again Please check LED status and Connect network fail. make sure the network connect successful first. GPS platform shows 1.