Key functions and advantages ⚫ Built-in ground station control software for remote control of drones, payloads, route planning, drone status and real-time image display ⚫ Equipped with a high-performance integrated image transmission and communication system to achieve stable transmission of 1080P@60f images within 5 km ⚫ Integrated large-capacity lithium battery with endurance up to 5 hours ⚫ Equipped with 7-inch 1920*1200 resolution full HD high-brightness LCD screen, brightness up to 1200nit ⚫ S
[9]Status indicator: Indication of the system operation normality When the status indicator flashes green, it indicates that the system is running normally and is not charging. When the status indicator flashes blue or white, the system is running normally and charging.
[13]Handle; [14] Photo button: short press to trigger photo; [15][18] Custom Button; [16] Cooling fan air inlet: fan air inlet, do not block; [17] Recording button: short press once to start recording; short press again to end recording; Figure 4 Top Schematic diagram of the Etlas Mobile [19] Gimbal heading dial: adjust the heading angle of the Gimbal; [20][28]Gimbal zoom dial: Adjust the gimbal&camera zoom factor.
Ground Station Software 1.Ground station main interface Open the Etlas Mobile , click on the ground station icon on the menu to start Ground station software, as shown in Figure 5,when open the software for the first time , please connect to WIFI to load the map. GPS Flight Mode Flight Status Connection Status alarms Battery RC Battery Settings Loadi ng Route MapMode Return Mode Positioning Flight Contro ller Status Image window UAV Status Parameter Figure 5 Software Main Interface 2.
Figure 6 Route Planning Interface 2) Edit and view the route ① Select a waypoint and drag the small circle icon to modify the speed, height and delay of the waypoint, as shown in Figure 7: Figure 7 Schematic Diagram of waypoint editing ② Click The button will play all the waypoint information interface, check whether the information of each waypoint (height, speed, latitude and longitude, etc.) and the order are correct, as shown in Figure 8.
Figure 8 Route Information Interface 3)Route Upload ① Click the “Upload Task” button in the above figure to upload the route task to the drone; ② The upload progress and result will appear on the interface;; ③ Delete the route information of the main interface; ④ Click the "Download Task" icon to download the existing mission route task on the drone to the Etlas Mobile I, and check whether the downloaded route task information is the required route, as shown in Figure 8.
Figure 9 route mode drop-down box 7
3.Introduction of the gimbal mode In the main interface of the software, click on the image window in the lower left corner to switch the map/image window and enlarge the image window. As shown in Figure 10, you can switch the gimbal mode by clicking the gimbal mode button in the upper right corner of the image serial port:①Following: In this mode, click anywhere in the image screen, and the platform will automatically follow the target window clicked by the user.
1 In the control settings, you can set the left and right hand throttle, restart the APP after the change to view the modification result; 2 Click “Calibrate Accelerometer” and follow the prompts to calibrate the accelerometer; 3 Click “Calibrate Remote Control”, then move the left and right joysticks and gimbal tilt, gimbal heading, gimbal zoom wheel to get the maximum and minimum values of each channel, and then complete the remote channel calibration according to the prompts; 4 After the “Calibration Rem
Figure 11 Flight Setup Interface Figure 12 Controls Setting Interface 10
3) Status display: The status display interface mainly displays the information of remote-control channel and flight control channel, as shown in Figure 13 below: Figure 13 Status Display Interface 4) Image transmission setting: The image transmission setting interface can query and set the image transmission information, configure the image transmission parameters, if the current parameters are not read, restart the APP, as shown in Figure 14 below: Figure 14 Graphic Setup Interface 11
General settings: mainly include system settings, map settings, remote control version, flight control board version, software version and other information, as shown in Figure 15: You can jump to the Android system settings interface; Figure 15 General Setup Interface Use precautions ⚫ Before turning on the UAV power supply, be sure to turn on the power supply of Etlas Mobile first. ⚫ During the mission, Keep the antenna facing the UAV sideways to ensure signal stability.
Appendix 1.Product Parameters Items Basic Information Parameter Model Etlas Mobile Dimensions 319x143x52mm Weight Environment 1.5kg Working Temperature -20℃~60℃ Charging ambient -10℃~50℃ temperature Operating System CPU Android7.1(Deep Customization) Dual-core Cortex-A72+quad-core Cortex-A53 architecture with a main frequency up to 2.
1414 1.Troubleshooting Malfunctions Solutions Indicating”compass This means drone compass sensor is uncalibrated which can cause inaccurate flying direction. Just calibrate the compass. uncalibrated” Indicating”accelerometer uncalibrated ” Indicating“rtk module init failure,not find RTK_CMD.txt file” Indicating “remote in bootloader mode, please open update file to update it ” Indicating”Severe: Etlas Mobile is in low battery, This means accelerometer is uncalibrated. Just calibrate it before flight.
1414
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.