User's Manual

Mode Indicator
Power on
Standby
Charging
Full charge
Foreign objects are detected
Under overtemperature
protection status
The blue light is always on
Green light breathing
The lights are off
Blue light to green light and then
blue light
The blue light flashes
The blue light flashes
User’s Manual
Product introduction
Packinglist
1.Wireless charger ×1
2.USB cable ×1
3.Air outlet clip ×1
4.
Operation instructions ×1
Operation instructions
1. Put the screw nut into ball joint of , insert the air vent mount into the ball joint
and tighten with screw nut.
2. Insert the air vent clip into the car air outlet vane and tighten to lock.
3. Plug in the Type-C cable, the arm clamps on both sides will automatically
open, and place a mobile phone in, the arm clamps on both sides will
automatically clamp the mobile phone tightly.
Flashing Pattern
Product parameters
3-Clamp arm
2-Air vent clip
4-Button
5-Indicator
1-Wireless charging area
6-Bottom bracket
Car Wireless Charger
Frequently Asked Questions
(1) Please make sure your phone supports wireless charging.
(2) Please check if you have used a QC3.0 car charger.
(3) Please use the original cable to connect the power supply before use.
(4) Please check the thickness of the phone case does not exceed 5 mm.
(5) Please make sure there is no metal material, magnetic objects, credit
cards or pop holders on the back of your phone between the phone and the
phone case.
Why doesn't this charger work ?
My phone is compatible with wireless charging so why won't
it charge with my wireless charger?
Make sure that you are using the right adapter and there is no problem with
the charging cable and try restarting your phone.
Product details
1. This product has the power storage function and can open and close the arm
clamps twice after flameout to prevent the embarrassment of failing to open
the arm clamp after flameout.
2. This product adopts waveform anti-skid silicone pad design, which can
effectively avoid mobile phone buttons.
3. This product adopts u-shaped armlock radian and won’t slide out either even
if the phone screen is placed downward.
4. This product has circulating cooling holes to protect mobile phones from
heating during charging.
Product description
The wireless charger supports 15W fast charging and is available for both
Apple and Android models.
Wireless charging for equipment conforming to Qi wireless charging
standards.
The automatic retractable clamp arm is flexible so you can easily fix the
mobile phone to charge it or retrieve it
This product has functions of overcurrent protection, overheat protection and
short circuit protection and has product certificates of FCC, CE and ROHS.
Wireless charging sensing: when the mobile phone with wireless charging
approaches the charger and is sensed later on, the two arm clamps will
automatically clamp the mobile phone tightly and charge it wirelessly.
Foreign objects detection sensing: when the mobile phone without wireless
charging approaches the charger and is sensed later on, the two arm
clamps will also tightly clamp automatically, which can be used as a mobile
phone mount.
Description
Fully Automatic wireless car
phone mount
Model No.
CW35
Product size
110*69*52mm
package size
Unit Net Weight
117*80*72mm
108g
Gross weight
204g
Color
Black
Input Power
5V/2A 9V/2A
Output Power
15W(MAX)
Valid distance of wireless charging
≤5mm
Conversion efficiency
60%~80%
Operation frequency
125KHz
Materials
ABS+PC
Why not fast charging or not charging?
Please use a QC3.0 car charger for fast charging.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.