Microwave Module MIC01-5GH01 SPECIFICATION Product Name: Microwave Module Model No.: MIC01-5GH01 Issue Date: November 30, 2020 CUSTOMER PRODUCT DIRECTOR APPROVED SALES CHECKED APPROVED R&D CHECKED PREPARED Shenzhen Merrytek Technology Co.,Ltd Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.
Microwave Module MIC01-5GH01 Version: A1 ! Please read the 10th instruction carefully before using this product, since the performance of DC-powered microwave products is closely related to the stability and characteristics of the auxiliary power supply of the LED driver. 1. Features 1) 5-12Vdc input, low working current, and low standby power. 2) Small size and easy to install. 3) Patented low impedance antenna design to avoid interference with other wireless signals.
Microwave Module Operating Environment Certificate Standards MIC01-5GH01 Operating temperature -20℃…+85℃ Storage temperature -40℃…+125℃ Environmental requirement RoHS Certificate CE、FCC、RED IP Rating IP00 Protection class Class II Installation Built-in installation Dimension 15.5x20mm Package Bubble bag + partition + outer box (K=A) Net Weight 3g Version: A1 Humidity: 10%-95% (non-condensing) Note 1.
Microwave Module MIC01-5GH01 Version: A1 5. Structure 6.
Microwave Module MIC01-5GH01 Version: A1 8. Typical application circuit and parameter configuration Declaration: F1, F2, F3 are pins for hold time setting, F4 is for detection sensitivity, and F5 is a pin to switch the daylight sensor, details are specified in the below sheet. If only fixed parameter are needed, the DIP switch in the above figure can be replaced with 0R resistance.
Microwave Module MIC01-5GH01 Version: A1 S4(F4) Configuration Sheet Number Scene Number S4(F4) Status Detection sensitivity 1 QS1 S4 close 50% 2 QS2 S4 open 100% (Factory tested gear) S5(F5) Configuration Sheet Number Scene Number S5(F5) Status Daylight sensor threshold 1 QS1 S5 close 30Lux 2 QS2 S5 open Disable (Factory tested gear) Notice 1) Detection sensitivity refers to the sensitivity of the sensor to detect human movement signals.
Microwave Module MIC01-5GH01 Version: A1 220uF at the VCC of input power. 7) The product should be installed as far away as possible from scenes like large metal equipment, pipes, air conditioning outlets, exhaust vents, smoke exhausters, to avoid the equipment vibration.
Microwave Module MIC01-5GH01 Version: A1 13) There should be no metal accessories or glass directly in front of and near the product, so as not to affect the normal operation of the sensor. And the thickness of the plastic should be less than 2mm, otherwise may affect the detection effect. 14) There should be a certain height difference between the antenna surface and the metal plane (aluminum substrate, iron casing), and the recommended distance is greater than 5mm. Shenzhen Merrytek Technology Co.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.