Microwave motion sensor MC606V Version: A2 SPECIFICATION Product Name: Microwave motion sensor Model No.: MC606V Issue Date: March 13, 2018 CUSTOMER APPROVED PRODUCT DIRECTOR APPROVED SALES CHECKED R&D CHECKED PREPARED Shenzhen Merrytek Technology Co.,Ltd Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.
Microwave motion sensor MC606V Version: A2 1. Features Built-in motion sensor & daylight sensor On/Off, Step Dimming Function Wide Input Voltage range 120/277/347Vac 15m Max. Mounting Height 1-10V & Synchronous Control Interface Sensor parameter can be set via DIP switch. 5 Year Guarantee 2. Parameters Input Operating voltage 108-382V AC 50/60Hz Rated voltage 120/277/347V AC 50/60Hz Stand-by power ≤1.
Microwave motion sensor MC606V Version: A2 Daylight Sensor 2Lux/5Lux /10Lux 25Lux /50Lux /100Lux /Disable Detection Radius Refer to detection pattern Mounting height 3-15m (Max.15m) Detecting Angle 150°(wall mounting) 360°(ceiling mounting) Operating Temperature -35℃...+70℃ Humidity: 85% (non-condensing) Storage Temperature/humidity -40℃...
Microwave motion sensor MC606V Version: A2 2. 2-step dimming function (Stand-by Period“+∞”) 3. 3-step dimming function (Stand-by Period“5s/5min/10min/30min/1h”) 4. Structure 5.Dimension (mm) Shenzhen Merrytek Technology Co.,Ltd Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.
Microwave motion sensor MC606V Version: A2 6. Wiring *The sensor is designed for connect one load only. Connect more than one loads may damage the sensor. 7. Detection pattern 1）Ceiling mounting Height: 3m Heigh: 12m Sensitivity: 100%/75%50%/25% Sensitivity: 100% Fast moving (Speed: 1m/s) Fast moving (Speed: 1m/s) Slow moving (Speed: 0.3m/s) Slow moving (Speed: 0.3m/s) Shenzhen Merrytek Technology Co.,Ltd Add: 2nd and 3rd floor, NO.
Microwave motion sensor MC606V Version: A2 8. Dip switch settings 1. Detection Area 1 2 Ⅰ ON ON 100% Ⅱ ON - 75% Ⅲ - ON 50% Ⅳ - - 25% 2. Hold Time 3 4 5 Ⅰ ON ON ON 5s Ⅱ - ON ON 30s Ⅲ ON - ON 90s Ⅳ - - ON 3min Ⅴ ON ON - 20min VI - - - +∞ 6 7 8 Ⅰ ON ON ON 0s Ⅱ - ON ON 5s Ⅲ ON - ON 5min Ⅳ - - ON 10min Ⅴ ON ON - 30min VI - ON - 1H VII - - - +∞ 3. Stand-by Period Shenzhen Merrytek Technology Co.
Microwave motion sensor MC606V Version: A2 4. Daylight Sensor 1 2 3 4 Ⅰ ON ON ON ON 2Lux Ⅱ - - - ON 5Lux Ⅲ - ON ON - 10Lux Ⅳ - - ON - 25lux Ⅴ - ON - - 50lux VI ON - - - 100lux VII - - - - Disable 5. Dimming brightness preset function 5 6 Ⅰ ON ON 50% Ⅱ ON - 30% Ⅲ - ON 20% Ⅳ - - 10% 9. Initialization 1/ On/Off function /3-step dimming function: After power on, the sensor automatically turns on light at 100% brightness.
Microwave motion sensor MC606V Version: A2 11. Application notice 1. The sensor should be installed by a qualified electrician. And ensure that the electricity supply is switched off before installing or servicing the product. 2. Installation inside a glass or plastic housing will result in a reduction of detection sensitivity. Expect a reduction of approximately 20% for every 3mm of thickness. 3. Detection area will be affected by speed of motion, height of installation and volume of moving object. 4.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED Statement ‐ English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
