Assembly Instructions

Open cooleer APP
Choose visual earwax remover
②
Turn on the ear picker
Scan the QR code to download
Cooleer APP
①
Accessories display
Product size
① ②
③ ④
11 mm
145 mm
14 mm
33.5 mm
Return to the APP interface,
press the power button to
turn on ready to use
⑤
Parts replacement
Screw-tooth earspoon is more
convenient to remove and install
Ear pick assembly
Make sure the
screws are tight
Open the cover
you can boot
③
Mobile phone connection
products WIFI “Cooleer-xxxx”
password：12345678
④
Open the cover
you can boot
(Hall switch)
Wi-Fi
Wi- Fi
Cooleer-C076
TP-LINK_7F71
FENGPEI
HUAWEI-608
PDCN
d246
PDCN_5G
TP-LINK_98F8
HUAWEI-306
TP-Signworld
DIRECT-C8
Select network
set up
49.0 mm
145.0 mm
Trouble shooting
Malfunction
Solution
APP unable to
install
Support system：
Android version 5.0 or
higher; ios12 or higher
APP crashes
Clean the phone
running background,
restart the APP
Accessories are
not installed
smoothly
Align the accessories
with the lens barrel
and turn clockwise
Power red color
indicator flashes
Prompt that this product
has a low battery, please
charge it before use
The product
failed to display
the real-time
image after
successfully
connecting to
the APP
Disconnect the phone
from the WIFI
connection, restart the
product or clean the
background of the
mobile phone, reopen
the APP, and reconnect
to the WIFI
WIFI connection
is unstable fixed,
sometimes a few
seconds the
clock breaks
Restart the product
and reconnect app
Insufficient battery, please
recharge in a hurry
After entering the
APP white screen
occasionally
appears
Wait a moment
If the above operation fails to solve the
problem, Please get in touch with the
customer service, We will further help
you provide practical solutions.
Restart the product or
clean the background of
the mobile phone, reopen
the APP, and reconnect
to the WIFI
Fully charge before
use
No reaction on,
no light on
Charging does
not light up
Put on the cover and
recharge
Instructions
①
②
1>. The red light is on when charging,
and the light is automatically turned
off when the battery is fully charged;
2>. When the battery is low, the red
light flashes;
3>. After the ear picker is turned on,
the green light is on.
Indicator light:
①
Charging port: DC 5V/220mA.
②
Name Visual earwax remover
Number M6
Weight 27g
Network standard IEEE802.11b/g/n
Antenna Built-in FPC antenna
Working frequency 2.4Ghz
Image transfer rate 30fps
Image sensor CMOS
Working temperature -10℃～50℃
Battery 220mAh Li-Polymer
Battery life About 90 minutes
Charging time About 1 hours
Input parameter DC 5V/220mA
Lens diameter 3.6mm
Best focus 1.5～2cm
Pixel 5 million pixels
Gyro 6 axis
Product parameter
Visualization
care Instrument
(FCC ID: 2AZYG-M6)