User's Manual

ManualsBrandsShenzhen Meian Technology Co.,Ltd ManualsElectronicsWireless Remote Control

Table Of Contents

P/N

PB-433R Wireless Remote Control

PB-433R is mini wireless remote control with 4 keys; it is one

of important accession of our company,With special out look,

it can be decoration and convenient for taking along. Easy to

operate,has high sensibility in 100 meters.With the function to

arm,disarm.emergency help.

1.INTRODUCTION

Model:PB-433R

Effective area:100m in open air

Frequency:433MHZ

Code:28bit ID.8bits function code,36 bits date code

Voltage:6V.With two CR2032 Lithium batteries.

working life is about one year

Information emission:LED light on

Temperature:-10℃~50℃

Size:62*32.5*13mm

Weight:25g

A. 4 independent function keys

B. For fast arm/disarm, easy and convenient,emergency

call,safe and covert.

C. Exquisite design, with pictures for key functions easy

explain

D. Scientific address code with millions of combination,

which enable all the remoter controller to be exclusive one,

without permitting, it is impossible to copy our wireless

products.

E. Low consumption for transmitting, indication for signal

out put visible

F. Compatible with all our 433MHz\868MHz wireless products.

2.SPECIFICATION 3.MAIN FUNCTION

4.USING

LED

Away

Emergency

help

Home

Disarm

1.For away arm,press the key

AWAY for 2 seconds

2.For at home arm, press the key

HOME for 2 seconds

3.For disarm,press the key DISARM

for 2 seconds

4.The emergency help is safe and cobert.

press the key HELP for 3 to 4 seconds to

realize this function

E M E R G E N C Y H E L P

2 0 1 1 0 2 2 8 - 2

5.TEST AND MAITENANCE

5.1 Coding

1.Set the control panel to the enroll wireless device status.

2.Let the remode on coding mode,and press any key of the remote at the moment the panel on remote coding mode.

5.2 Test

When finished in the factory,PB-433R has build-in batteries.Before testing,we will need to code wireless producte

with PB-433R,for the coding details,please view the CODE SETTING of the manual of wireless products.The testing

process as following;

1.Keep the distance of PB-433R from the wireless products above 3 meters;pressthe key with lock picture

on the remoter controller for 2 seconds,the lamp for checking receiver's state should light twice.

2.confirm the wireless products have the same response, such as hear the hint voice SYSTEM ALARM.

3.Operate in the corner of covered zone of wireless products,such as the place blocke by will and large object,

to see if the system has the sanme hint voice

Summary of content (2 pages)

PAGE 1
PB-433R Wireless Remote Control Away 1.INTRODUCTION PB-433R is mini wireless remote control with 4 keys; it is one Emergency help LED Home Disarm of important accession of our company,With special out look, it can be decoration and convenient for taking along. Easy to operate,has high sensibility in 100 meters.With the function to arm,disarm.emergency help. 2.SPECIFICATION 3.MAIN FUNCTION Model:PB-433R Effective area:100m in open air Frequency:433MHZ Code:28bit ID.
PAGE 2
5.3.Change batteries Change new battery when the signal become fade in the process of transmitting. Please follow the below steps to change the batteries. 1.Use small screw driver to open the small screw on the back of the remoter controller. Keep the screw carefully 2.Fetch the back cover and pull out the old batteries. Screw CR2032 batteries (Battery pole up:positive down:negative) 3.Input the new batteries,pay attention to the anode and cathode. 4.Fix the back cover with the screw. 5.