User's Manual

ManualsBrandsShenzhen Meian Technology Co.,Ltd ManualsElectronicsWireless digital PIR detector

Table Of Contents

Installation：

①wide-angle: 12M * 12M detection angle of 110 degrees

②flat curtain: 12M * 2M detection angle of 3 degrees

③ceiling curtain: 6M * 1M detection angle of 3 degrees

Installation height

Operation condition:

Operation temperature:-

10℃~60℃﹤95%RH

torage temperature:20℃ ~60℃(4℉ ~140℉)

Size:：86(L)*45(W)*36(H)mm

④ ： 2~2.3M

3.Installation

3.1 Notes

Don't face cold or

heat directly

Don't face the sun

-shine directly

Don't install near

electric cables

Don't install on a

unstable base

Don't face metal wall

Wall mounting wide

angle lens view

12m

Side view

2.3m

1.5m

0.6m

12m

7.5

2316

1.Introduction

3.2 Installation location

P/N:20170428A01

3.3 Change battery:

2~2.3m

Detector

Use double-sided adhesive to install the detector 2 to 2.3 meters

from the ground, pay attention to the installation of PIR down.

A, with a word screwdriver

light top groove, pull out the

bottom cover, remove the

bottom cover.

B, remove the old battery, according to the marked polarity of the

battery correctly into the battery.

Fig.1 Appearance

Fig.2 Internal Structure

PIR

LED

Tamper switch

Battery container

DIP switch

MC-535R is a PIR intruder detector for indoor use.It adopts

precision cylindrical FRESNEL lens, can effectively improve

energy saving, with high sensitivity and free of false alarm. By

using advanced patented software, it can identify the real

intruder and other interference factor which may result in false

alarm. Pulse counting can be adjustable. It is widely use in

various indoor applications, Built-in big capacity lithium

battery, power-save mode.Its working life is up to 2 years or

above.

2.Specifications

Model:MC-535R

Maximum detection distance: 12m/25

Emitting distance: 120m (in the open area)

Infrared distance:

Working voltage: DC3V, 1*CR123A lithium battery

Alarm current: ＜20mA

Quiescent Current: 16µA~17µA

Infrared section (as shown at right)

Optical lens data sheet

Infrared area: 12 × 4 (typical)

Maximum coverage: 12m * 12m (39 * 39 feet) / 90 °

Emitting distance : 433MHz

Alarm indication: The LED indicator is on for 2~3 seconds.

℃

12m

Installation can choose to install wide-angle, flat

curtain, ceiling curtain three ways, different installation

methods corresponding to the installation height and

detection angle is different (see "2, specifications and

technical parameters").

-1-

Wireless digital PIR detector User Manual

Summary of content (2 pages)

PAGE 1
Wireless digital PIR detector User Manual 1.Introduction MC-535R is a PIR intruder detector for indoor use.It adopts precision cylindrical FRESNEL lens, can effectively improve energy saving, with high sensitivity and free of false alarm. By using advanced patented software, it can identify the real intruder and other interference factor which may result in false alarm. Pulse counting can be adjustable. It is widely use in various indoor applications, Built-in big capacity lithium battery, power-save mode.
PAGE 2
C, the side of the shell with a battery up one end, the bottom cover with a button at one end down the face of the shell to close and pull the bottom cover into the face shell. 4. DIP switch function description Switch serial number OFF 1 High sensitivity( default) 2 Alarm delay 5 second Alarm delay 5 minutes(default) 3 LED is off LED is on(default) ON ON KE Low sensitivity 1 2 3 5.