User's Manual

Table Of Contents

拨码开关功能说明

拨码开关

Current consumption：

Static≤30μA，Alarm≤20mA（433MHz）

4.2 pet-immunity guidebook

The installation height of

2.2m to 2,4m is available

pet-immunity height

2 . 2 - 2. 4 m2 . 2 - 2. 4 m

≤15Kg

the pet is smaller than 15kgthe top of the detecting

area is the non-pet-immunity

area

2 . 2 - -2 . 4 m

2 . 2 - 2. 4 m

≤20Kg

。

the pet is smaller

than 20kg

prevent direct the

places where the pets can

clamb up

P/ N 20 1 10 30 1 -2

MC-335R Wireless PIR Detector

4.3 Introduce DIP function:

MC-355R can choose 3 kinds of pulse as follows:

1-pulse： Alarm 1-pulse.

2-pulse: Alarm 2-pulse。

3-pulse： Alarm 3-pulse(Factory default)。

Higher pulse counting and lower catch performance and can avoid false alarm

1 2

Modes

1-pulse

2-pulse

3-pulse

OF F

OFF

OFF OF F

PAGE 1
MC-335R Wireless PIR Detector 拨码开关功能说明拨码开关 Current consumption： Static≤30μA，Alarm≤20mA（433MHz） 4.2 pet-immunity guidebook NO OK X 2.2--2.4m the top of the detecting area is the non-pet-immunity area prevent direct the places where the pets can clamb up 4.3 Introduce DIP function: 。 15 ≤2 0 K g ≤1 5 K g 2.2-2.4m the pet is smaller than 15kg the pet is smaller than 20kg 1 2 Modes MC-355R can choose 3 kinds of pulse as follows: ON OFF 1-pulse 1-pulse： Alarm 1-pulse.
PAGE 2
MC-355R can set three modes as follows: Test Mode：Emitting alarm signa nce detector is triggered. No time-lag between two emissions. Power-saver mode：Send detection signal of detector and battery status Coding Mode：Press tamper switch for more than 3 seconds and send an identification code to receiver. 4.4.