User's Manual

MC-235R WIRELESS PIR DETECTOR
MC-235R is PIR intrusion detector with Pet immunity. It adopts
digital microprocessor control technology. By using refined
cylindrical FRESNEL lens in PIR section, it has high energy receiving
efficiency and high sensitivity and false alarm immunity. With
advanced patented software technology, It well settles the false
alarm and malfunction caused by other interference factors. It has
ultra-high detecting sensitivity and excellent anti-False alarm
performance. It is widely used in various indoor applications by
choosing proper pulse quantity. Special battery-saver feature
and working life is up to more than 2 years.
Model：
MC-235R
Detection distance：9m（25℃ ）
Emitting distance：120-150m（in open area）
Operating voltage：6V(4 *1.5 V)
Infrared section(as shown in the figure)
Optical lens data
Infrared area：11+5 （typical）
Max.coverage：9 m*9m (23*46feet)/90°
Emitting frequency：433MHz
Alarm indication：LED flashes for seconds.
Mounting：
Wall or corner mountable，2.0-2.4m above
ground
Operating environment：
Operating temp：-10℃-50℃ （14℉-122℉ ）
Storage Temp.：-20℃-60℃ （-4℉-140℉ ）
Anti-white light（indoor） ：>9000LUX
Dimensions:（L*W*H）94*62*53mm
3.Installation
2．Specification
3.1Notes
Wall mounting wide -angle lense view
Side view
2. 5 m
1. 5 m
0. 6 m
6m
4m
2m
7. 5
23
30
16
,
5
2
,
,
,
8
,
0
,
,
,
X
X
X
X
9m
Do not face the cold and
heat source directly
Do not face the sunlight
directly
Keep wiring away from
high-voltage cable
Do not install on
unstable object
Do not face the
metal wall directly
1.Introduction
P/ N 201 10 5 06 - 2
Lense
PIR
Tamper
switch
0
1.5m
1.5m
3m
3m
4.5m
4.5m
10m
8m
6m
4m
2m
0
0
Jumper
switch
X
DIP
switch
Current consumption：
Static≤30μA，Alarm≤20mA（433MHz）
3.2 pet-immunity guidebook
The installation height of
2.2m to 2,4m is available
pet-immunity height
2.2- 2 . 4 m2.2- 2 . 4 m
≤15K g
the pet is smaller than 15kgthe top of the detecting
area is the non-pet-immunity
area
NO
OK
2.2- - 2 . 4 m
2.2- 2 . 4 m
≤20K g
15
。
the pet is smaller
than 20kg
prevent direct the
places where the pets can
clamb up
X
3.3 Illustrated installation
Wall mount
②.Non bracket mounting：2.0-2.4m above the ground，Wall,
0
bracket or 45 corner mountable
B. Mark screw hole and drill
C. Insert two expandable
dowel and attach the
base to the wall with
two screws.
D. Replace the battery and
cover
①.Dismantle procedure:
A. Remove the screw by srewdriver
Bracket
mount
0
4 5
mount
Corner