Smart Pillow (P200) User Manual Sleepace 1/9
Product introduction .................................................................................................................. 3 Device Description ...................................................................................................................... 3 Operation guide .......................................................................................................................... 4 LED Indicator ..............................................................................
(English) 1.Product introduction: P200 is used to track your sleep data including heart rate, respiratory rate, turning over, sleep cycle etc and provides a comprehensive sleep analysis and sleep advice to help improve your sleep quality.
Controller Box Contents: 1 *Smart Pillow 1 *USB charging cable 3: Operation guide Step 1: Download the’ Sleepace’ APP and register an account Step 2: Connect smart pillow to APP.
Make sure the controller and your smart phone are switched on and Bluetooth® is activated on your smart phone. Follow the instructions given by the app to connect the device. Step 3: Start Sleep monitoring Click’ Start Sleep’ in the homepage of APP to start sleep monitoring. During short interruptions of sleep (e.g. going to the bathroom) the device keeps on recording. If longer interruptions (more than 60 minutes) occur, the pillow will stop monitoring and switch itself off. You may have to re-activate it.
04LED Indicator I SN 1 Status Display Power On(Press the Power Green LED indicator is ON for 5 seconds. button for 3 seconds) 2 Power Off(Press the Power Red LED indicator is ON for one second. button for 3 seconds) 3 Low battery 4 Charging device 5 Charging complete Red LED indicator fleshes every two seconds, please charge the device immediately. Red LED indicator stays ON. Green LED indicator stays ON.
06Precautions Please note, this device is not a medical device and cannot be used to prevent sudden death. Please do not wholly rely on the device, users should be well taken care of. For users with existing health problem, family member should check the monitoring status now and then. 07Safety Notice ● ● ● ● ● ● ● ● ● ● Do not over bend the product. The build-in sensor may be damaged.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user' s authority to operate the equipment.
2F Building A, Tongfang Information Harbor, No. 11, East Langshan Road, Nanshan District, Shenzhen, P.R. China Importer: anixx s.r.o.