Maniway WALL MOUNTABLE 2.1CH BLUETOOTH SOUNDBAR SPEAKER WITH BUILT-IN SUBWOOFER USER MANUAL MW-1481 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FORFUTURE REFERENCE.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom of the apparatus. The Rating plate is located at the bottom enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions.
16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. The product may be mounted to a wall only if recommended by the manufacturer. 19. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 20. Power Sources - This product should be operated only from the type of power source indicated on the marking label.
COMPLIANCE WITH FCC REGULATIONS FCC ID OG5MW1481 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
DEAR CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and t h e E l e c t r o n i c Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
LOCATION OF CONTROLS 1 MID-HIGH RANGE SPEAKERS 8 RCA LINE-IN JACKS 2 WOOFER SPEAKERS 9 RCA COAXIAL JACK 3 REMOTE CONTROL SENSOR 10 AUX-IN JACK 4 - (volume down) 11 OPTICAL–IN JACK 5 + (volume up) 12 POWER ON/OFF SWITCH 6 7 13 POWER CORD LED INDICATOR 14 USB JACK (for USB charging) RED = STANDBY BLUE = BLUETOOTH MODE CYAN = OPTICAL INPUT MODE PINK = COAXIAL INPUT MODE E‐5
REMOTE CONTROL 1 8 MOVIE MUTE 2 COAX 9 3 OPTICAL 10 4 11 5 12 (Volume down) (Volume up) 6 PAIR 13 AUX/RCA 7 MUSIC 14 BT Remove the protective tab for first-time use The Remote Control has a pre-installed lithium CR2032 battery. Remove the protective tab to activate the remote control battery. Battery Installation 1. Use a screwdriver to remove the screw (#A) 2. Remove the battery compartment cover (#B) 3. Place the battery into the battery compartment. 4.
BATTERY WARNING 1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit. 2. Use only the size and type of batteries specified. 5. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. 6. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions). 7.
CONNECT POWER Risk of product damage! - Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. - Before connecting the AC power cord, ensure you have completed all other connections. - Connect the mains plug of the main unit to a mains socket. - Ensure all connections are connected before connecting to the mains power socket.
BLUETOOTH OPERATION Pairing a Bluetooth enabled device with the soundbar. 1. Turn on the soundbar, select BT mode. The STATUS INDICATOR (#7) will light up Blue and flash. 2. The soundbar will go into Pairing/Discoverable mode. 3. Turn on the Bluetooth function for the device you want to link to, and enable the search or scan function to find the soundbar. 4. Select " MW-1481" from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) with your device.
OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION 1. Ensure that the unit is well connected to the TV or other audio device via Optical or Coaxial cables (not included). BUTTON (#6) on the main unit repeatedly 2. Turn on the soundbar, press the or press the OPTICAL BUTTON (#3) or COAX BUTTON (#2) on the remote control to select the relevant OPTICAL or COAXIAL mode. 3. Operate your audio device directly for playback features. 4.
Ecology note This product is an eco designed product. After 60 minutes without any audio input, the device will automatically switch into standby mode. Follow up the instruction manual to resume the operation. Important note: This device is equipped with an energy saving mode: if no signal is given during 60 minutes the device will switch automatically into standby mode in order to save energy.
TROUBLE SHOOTING GUIDE PROBLEM No Power POSSIBLE CAUSE The unit is disconnected from the AC outlet AC outlet is not functioning Power On/Off Switch is off Remote Battery empty Control does Installed battery wrong polarity not work Too far from the main unit No Sound Select wrong source input SOLUTION Reconnect to the AC outlet Sound is distorted Unit gets warm after extended play at high volume No sound when playing audio via Bluetooth Volume level is set too high Decrease the volume level This is nor