BRAND Portable Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
Cleaning The unit should be cleaned only as recommended. See the section « Care and Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Damage Requiring Service This unit should be serviced by qualified service personnel when: Objects have fallen into or liquid has been spilled into the enclosure. The unit has been exposed to rain.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
LOCATION OF CONTROLS Front View Back View Bottom View 4
1. Built-in Microphone 2. -Button In Bluetooth mode : Press this button to adjust volume level down during Bluetooth mode . In TF card Playback mode : Press and hold this button to adjust volume level down. Short press this button once to return to the beginning of current track or previous track. 3. Button While unit is in Bluetooth or TF card Playback mode, press once to play or pause the current track.
6. Operating mode indicator (Red/Blue/Purple) Blue color =Bluetooth mode Purple color= TF card playback mode Red=Aux-in mode 7. TF card slot 8. Mini USB Charging jack 9. Aux-In Jack 10.Power On/Off selector BATTERY CHARGING INSTRUCTION This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V 500mA and up (upto 1.5A).
RECHARGING THE INTERNAL BATTERY After prolonged use, the internal battery will become weak and the operation may become intermittent. When the internal battery capacity is very low, the battery Indicator will rapidly flash in red to alert you to recharge the internal battery as soon as possible. Plug the speaker into a USB port on your computer by using the included USB cable or into a DC 5V, 500mA and up (upto 1.5A) USB power adaptor (not included).
Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings are correct for the battery pack being charged. Charge batteries on a fireproof surface and away from flammable items or liquids. Batteries should NEVER be left unattended while charging. Only adults should charge the batteries. Follow the manufacturer's instructions for charging the product and do not charge longer than recommended. Unplug the charger when the battery is charged or not in use.
OPERATING THE SPEAKER IN BLUETOOTH MODE Bluetooth involves a technology for wireless radio connection of devices over a short distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which work on the same frequency band. This speaker offers you the possibility to use a Bluetooth enabled device.
1. When the speaker turned on, the Operating mode Indicator flashes in blue . The speaker is ready to pair (link) with your Bluetooth device . 2. Activate Bluetooth on the compatible device, and set it to search for compatible devices. 3. Select the speaker name:”1308” from the list of found devices. Tips: Only one playback unit can be connected to the speaker. If the speaker is already connected to another playback unit, the speaker will not appear in the BT selection list. 4.
3. Press the + / - button on the speaker to adjust to the desired volume level . Using The Speaker as a Handfree Bluetooth Speakerphone 1. Link your cell phone to the speaker via Bluetooth as described above . 2. When receiving an incoming call on your cell phone , tap button on the speaker to switch the incoming call from cell phone to the speaker. A short beep sound will be heard confirming the call was answered. Complete your call using the built-in microphone and speaker. 3.
-Press and hold the “+” or “-” button to raise up/lower the volume level. Short Press “+” button to skip to next track or press “-” button to the previous track. To remove your TF card, simply pause the playback and gently unplug it from the slot. Remember to turn off the speaker, too.
control of your external device and the volume control of this unit to find the most desirable volume setting. 2) Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish listening. Don't forget to switch off the power of your external device as well. 3) During AUX mode, if you plug TF card into the unit, the play mode will automatically change to TF Card playback mode.
NO Sound The MW-1308 battery is dead. The MW-1308 is not linked with the cell phone. Bluetooth version is not supported. Recharge the MW-1308 battery. Go through “Speaker Operations” process to link the speaker. Increase the volume of your device. Check whether a connection exists. If necessary, pair the speaker again to the audio source. Increase the volume on the speaker Increase the volume on the audio source.
SPECIFICATIONS Battery capacity (included): 700 mAH Charging Voltage: DC 5V, 500Ma and up. (upto 1.5A) Max Play Time: 3 Hours Working Temperature: -5℃~+ 40℃ Working Humidity: 20%~80% The right to make technical and design modifications in the course of Continuous product development remains reserved.
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.