ManiWay Owner's Manual 2.1CH Sound base with Built-in Subwoofer PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
their safety. Children should be supervised to ensure that they do not play with the appliance. 1. To prevent possible hearing damage, do not listen at high volume levels for long time periods respectively a sudden high volume level. 2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while. 3. The appliance is not intended to be operated by means of an external timer or separate remote control system. 4.
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only. Explanation of Graphical Symbols: The lightning flash within an equilateral triangle is intended to alert you to the presence of un-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
5. “ ” Button -Press to turn on/off the unit. Back View 6. 7. 8. 9. 10. 11. 12. 13. 14. HDMI In 1 Socket HDMI In 2 Socket HDMI Out to TV Socket (ARC) Optical Socket Coaxial Socket RCA (L, R) Socket 3.5mm Aux-in Socket AC- IN Socket USB Port Bottom View 15. 2*Subwoofers Remote Control 1. : Switch the unit between ON and STANDBY mode. 2. MODE : Press to Switch the mode 3.
4. MUTE : Mute or resume the sound. Note: When Mute is on, the LED will switches slowly. 5.MOVIE : Press to choose Movie surround sound effect. Press again to choose Music sound effect 6. ▲: Press to adjust volume level up. 7. : In Bluetooth/USB mode, skip to previous track. 8. : In Bluetooth/USB mode, skip to next track. 9. : In Bluetooth/USB mode, start or pause playback.
After inserting the battery, replace the battery compartment cover (B) . First insert the flap (C) into the foreseen gap of the battery compartment. After fully close the battery compartment cover (B) Secure with the screw (A) If the remote control does not work properly, replace the battery. Use batteries of high quality only. Batteries of low quality might leak and cause damage.
HDMI IN-1 & HDMI IN-2 Connect an HDMI cable (not supplied) from the HDMI IN-1 or HDMI IN-2 jack on the back of the product to the HDMI OUT jack on your digital device. HDMI OUT TO TV (ARC) Connect an HDMI cable (not supplied) from the HDMI OUT TO TV (ARC) jack on the back of the product to the HDMI IN jack on your TV. ARC (Audio Return Channel) Function The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
*Not all TVs have the audio outputs shown above. To connect the Sound base directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual. Connect Power - Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. - Before connecting the AC power cord, ensure you have completed all other connections. -Connect the mains plug of the main unit to a mains socket.
Notes: -The LED display will go off automatically if the sound bar is sitting idle and no input signals are being received for about 5 minutes, press any button once to light up the display again. -When the sound base is sitting idle and no input signals are being received for about one hour, the sound bar will automatically switch to Standby mode Adjust the Volume • Press the +/– button on the main unit or ▲/ button on remote control to adjust the volume level.
Before using your speaker with a compatible device, such as a mobile phone, for the first time, you must pair and connect it to the device. 1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For this, refer to the operation manual of your player. 2. While Bluetooth mode. The LED words flashes quickly to show that the pairing mode is activated. Pair the Speaker 1.
2. While in Power On mode, press the / button on the main unit repeatedly or press the OPTICAL or COAX button on remote control to select the relevant OPTICAL or COAXIAL mode. 3. Operate your audio device directly for playback features. Note: If there is no sound come out from the soundbase and the status indicator light flashes quickly, Make sure the audio (digital output) setting of your source player (e.g. TV, DVD player, game player) is set to PCM. 3.5MM AUX/RCA INPUTS OPERATION 1.
No sound Select wrong source input Select correct source input Sound is distorted Volume level is set too high Decrease the volume level Unit gets warm after extended play at high volume This is normal Turn the unit off for a period of time or lower volume No sound when playing audio via bluetooth Your bluetooth device has been paired The volume control of your bluetooth device is set at too low The volume control of main Unit is set at too low According to the“Bluetooth operation” Increase the v