TYS202 User Manual (EUROPE) 2020-05-22 V1.0 新建 2020-06-01 V1.
1.
2. Camera parts Reset Button microSD Card Slot Indicator Light 3. Getting started Step 1 Download the Kami Home App. Register a Kami account and login. Step 2 After logging into your Kami Home App, tap the“+” sign and select “Kami Mini Camera”. Step 3 Ensure that your cell phone is on the 2.4GHz Wi-Fi network. Note: To enable local recording, ensure that you have inserted a microSD card into the slot shown below. *Supports up to 128GB microSD cards.
Step 5 2.4Ghz Wi-Fi required Enter your network’s SSID and Wi-Fi password, and then use your Kami Mini camera to scan the QR code. 4. Power on the Camera Place the camera close to the router, and make sure Wi-Fi access is available, then connect the cable to the Micro USB port on the back of the camera to power the outlet as shown. Step 6 When the QR code has been successfully scanned, tap “Next Step”. You will hear the voice prompt “Pairing is successful” shortly.
. Switch Wi-Fi Networks 6. Important safety guidelines When you need to switch Wi-Fi networks or update your Wi-Fi passwod, follow the instructions below: 1. Read these instructions. 2. Clean only with dry cloth. 3. This camera is for indoor use only. 4. Only use the attachments/accessories specified by the manufacturer. 5. Unplug this apparatus during lightning storms or when unused for long periods of time. 6.
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.