User's Guide

Galaxy Lite Star Projector
Shenzhen LUBON Technology Co., Ltd.
Thank you for purchasing POCOCO Galaxy Lite
Star Projector. The projection film could be replaced.
The user guide should be kept properly. Please read it
carefully before operating your projector.
PACKAGE LIST
-1-
1) Focusing wheel
2) Angle adjustment lever
3) Type-C jack
4) Charging indicator
5) Function button
6) Replaceable films
7) Film tray
-2-
-3-
1. Environmental Requirements:
The product should be used in a dark room, please turn
off other light, place the product on a flat solid surface,
and aim toward desired ceiling/wall.
-4-
PRODUCT INTRODUCTION
BEFORE YOU BEGIN
-6-
SPECIFICAION
The following conditions are not covered by the warranty:
Damage caused by incorrect installation, operation, or
inappropriate use environment.
Damage caused by disassembling the main engine for repair
and modification.
Damage caused by man-made or natural disasters.
If the warranty card is changed, this card will be invalid.
-7-
Warranty Card
Version Number
Your Name
Your Email
Order ID
Purchase Date
Name: Galaxy Lite Star Projector
Size: 157*120*120 mm
Weight: ≤500 g
Housing: ABS+PC plastic
Comfortable Viewing Distance: 2~2.5m (The diameter
of the projection pattern is 3.2~4 m)
Power Adapter Output: 5V
Lithium Battery: 3.7V 2000mAh
Standard: UL62368
Version Number: POLT01
Color: Black/ White
①
⑥
⑦
②
③
④
⑤
4× Replaceable Films 1× USB Power Cord
-5-
USER GUIDE
1× Star Projector
Please check before operating :
1. Whether the product is damaged;
2. Whether the USB power cord is damaged.
If it is damaged, please contact the relevant maintenance
service immediately instead of using it.
Before operating your projector, please read the “Before
you Begin” section and “Caution” section of this user guide.
host to a 5V charger. The indicator light turns from
red to green when the lithium battery is fully charged.
The light does not light up when the battery can be
used normally.
2) Maintenance: If you will not use it for a long time,
please turn off the power and charge it once a month
to avoid shortening the life of the lithium battery.
2. Buttons and Indicators:
Type-c Jack
Light 1
(charging indicator)
Flash Red: low power
Solid Red: in charging
Solid Green: full power
Off: Not in charging. Normal power status
Button 1 (effects)
Power on / off
Button 2 (rotation)
Rotation on / off
Button 3 (timer)
Timing on / off
Press 1st time: 15 minutes
Press 2nd time: 30 minutes
Press 3rd time: 60 mintues
Light 2
(timer indicator)
Slow - 15 minutes
Medium - 30 minutes
Light on - 60 minutes
1. Pull out the film tray.
2. Press the film in the film tray, align the straight
edges of the film and the installation position.
3. Insert the tray back into the device.
CAUTION
Please use a matching power adapter (5V).
This product is not a fireproof and waterproof product.
Use and store in a normal temperature and humidity
environment.
It is not recommended to disassemble and modify
machine parts at will.
LIMITED WARRANTY
The warranty period of this product is twelve months after
purchase. If it is used correctly within the warranty period,
but the product has problems due to its own quality, we can
provide warranty service.
When you need to provide warranty service, please provide
proof of purchase and warranty card.
Please send the details to [e-mail], the support
team will reply within 24 hours.
-30° 30°
4. Rotate the focus wheel to achieve a clear projection.
5. The angle of projection can be changed within the
range from -30° to 30° as needed.
1× User Guide
Galaxy Lite Star Projector
Shenzhen LUBON Technology Co., Ltd.
Thank you for purchasing POCOCO Galaxy Lite
Star Projector. The projection film could be replaced.
The user guide should be kept properly. Please read it
carefully before operating your projector.
USER GUIDE
OPERATING STEPS
3. Power Supply:
The lithium battery of this product works as follows:
1) Charging: Use the USB power cord to connect the
CAUTION
When used by children, it must be guided by a guardian.
Avoid direct eye exposure.
Be careful of children ingesting spare parts.
Warning:
Changes or modifications to this unit not expresslyapproved by
theparty responsible for compliance could void the user’s authority to
operate theequipment.
NOTE: This equipment has been tested and found to comply with the limits
fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
aredesigned to provide reasonable protection against harmful interference in
aresidential installation. This equipment generates, uses and can radiate
radiofrequency energy and, if not installed and used in accordance with
theinstructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particularinstallation. If this equipment does cause harmful interference to
radio ortelevision reception, which can be determined by turning the equipment
off andon, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to thefollowing two conditions :
(1) this device may not cause harmful interference, and(2) this device must
accept any interference received, including interference thatmay cause
undesired operation.
The minimum separation generally be used is at least 20 cm.
-8-