User's Guide

尺寸：280x100mm
Step 3: Drill four holes in your wall, and install the
anchors.
Step 1: Open the battery cover.
Product Features
Product Overview
Our doorbell is a Wi-Fi enabled Smart Video Doorbell
which helps you to see, hear and speak to anyone at
your door from your smartphone or tablet from
anywhere. This Video Doorbell supports answering
ring calls from mobile App, two-way audio, instant
alert, motion detection and live monitoring.
Install your doorbell
1 A brief introduction of the Doorbell.
Push Notications within
5-8 seconds
Notications
Lens
Infrared LEDs
PIR Motion Sensor
Storage
Connectivity
Power consumption
Battery
Limited distance
between doorbell
and chime indoor
Video Compression
Voice Intercom
Video resolution
DFOV/130° Wide-angle
lens (4Glass)
3 meters PIR distance
Up to 128GB Micro SD card
802.11b/g/n Wi-Fi@2.4G
Two 18650 specication batteries
6pcs Infrared LEDs with
5 meters ash distance
80 meters (open space without
obstacle)15 meters (indoor)
20~30 meters
H.264
Two-way audio with noise
cancellation
1920*1080@15 fps
Product Specication Sheet
Wi-Fi distance
Two 18650 specication batteries work regularly
up to 3-6 months
FHD Mega pixels collocated with wide-angle lens
Support mobile phone remote fast wakeup within
4-7 seconds
2.4G Wi-Fi connection
High quality two-way communication with noise
cancellation
Support PIR motion detection, when someone hovers
at the door, it will send push alerts to your mobile phone
immediately
With IR-cut, it can switch automatically and it is
clearly visible at both day and night to keep your
home and family safe.
User’s Guide for Battery WiFi
Video Doorbell
Step 6: Press the Reset button long until you hear
the "system reset" prompt from the doorbell speaker.
Volume settings
Press the “volume” button once to trigger one time.
There are 4 volume levels you can choose from low to
high.
Change the ring
Step1: Press the “ring” button to choose one you like.
The indoor chime offers 38 different kinds of music for
options. Each press changes the music.
Step2: Press the “volume” button for 5 seconds till the
music changes.
Step3: Press the doorbell button to match the indoor
chime. Now, the music changed.
Indoor chime user manual
Volume key Ring key
Step 5: Mount doorbell inthedirectionofthearrow
andlockit by thescrewsatthebottom.
Step 4: Fix the doorbell on the wall through xing
screw hole.
Fix screwhole
Camera
Mic
PIR
Call button
Speaker
Reset button
USB
Charge LED
Step 2: Install 18650 battery and Mirco-SD.
18650 Battery
Mirco-SD
18 650 18 650
Charge LED: Charging in Red; Full in Green.
Standby 200uA
Working 260 mA
Working Temperature
Storage Temperature
-10~ 55℃
-20~ 60℃
Device Wakeup
Within 4-7s