Thanks for purchasing this trail camera Please read before using this equipment If you have any questions or problems. Please contact us by email: support@wosports.
CONTENTS PART LIST PRODUCT STRCTURE 4 Front View Operation Interface Bottom View Back View 5 6 7 7 CAMERA OPERATIONS How to use? LOADING BATTERIES INSERTING SD CARD HOW TO INSTALL APP IOS SMART PHONE TURN ON WIFI ANDROID SMART PHONE TURN ON WIFI 8 9 10 11 12-16 17-20 USING THE CAMERA Operating Buttons 21 ITEM SETTINGS Settings Menu MOUNTING 22-26 27 TECHNICAL SPECIFICATION 28-29 FAQ 30-35
PARTS LIST 1.Trail Camerax1 4.Wall Mountx1 2.User’s Manualx1 3.Nylon Strap with Bucklex1 5.
PRODUCT STRCTURE FRONT VIEW PIR Sensor Infrared LED Array Camera Lens Indication LED Latch 5
PRODUCT STRCTURE OPERATION INTERFACE LCD Screen Left/Turn on WIFI UP/Photo Right/Shot Down/Video OK MENU Power/Mode Switch Battery Release 6
PRODUCT STRCTURE BOTTOM VIEW Microphone BACK VIEW External Power Cover (open to use DC power port) SD Card slot USB Port Mounting-Bracket Screw Receptacle (Standard 1/4’ ’-20-Tripod Mount) Battery Compartment Sawtooth Brackets Belt Hole Cable-Lock Hole 7
CAMERA OPERATIONS HOW TO USE? 1. Install 8pcs AA batteries (NOT INCLUDED). 2. Install SD card (CLASS 6 or higher class Up to 32GB max, NOT INCLUDED). 3. Put the switch to "AIM", then you can setting (Date/Time, Image resolution, video resolution, and the Interval time etc) 4. Put the switch to the“ON”position, it will enter the PIR detection state. Then the trail camera starts working. 1.Be sure to switch the camera’s power OFF before inserting /exiting the SD card and loading/unloading the batteries. 3.
LOADING BATTERIES 1.Press the Battery Tray EJECT button to release the battery tray and pull it out for loading. Switch the camera’s power OFF when loading/unloading batteries. 2.Be sure to inset each battery so its polarity(+/- direction) matches the polarity indications at the bottom of the battery tray. A full set of 8AA Alkaline or Lithium batteries should be used . 3.Pull the battery tray into the host, you will hear a slight“click”sound, which means the battery compartment is locked.
INSERTING SD CARD Make sure that the SD card is insert correctly .If you hear“click”sounds that means it has be inserted correctly .The camera uses a standard SD memory card to save your photos or videos.SD and SDHC (high capacity)class 4 or higher seed cards up to a maximum 32GB are supported. A class 10 memory card is recommended when the camera works at burst mode.
HOW TO INSTALL APP Please install the APP on your smart phone before using.
IOS SMART PHONE TURN ON WIFI 1. Turn the camera switch to AIM mode, open the APP, click the "WIFI Connect Camera" to enter the Bluetooth list. 2. Select in the Bluetooth list, "BLE Device-XXXXXX".
3. Click WIFI SETTING to jump to the setting interface. 4. Click the Settings icon in the upper left corner to jump to the next interface.
5. Click the icon to enter the WIFI list. 6. In the WIFI list, select the WIFI name displayed on the camera screen "G500-WIFI-XXXXXX".
7. Enter the password "12345678" and click the Join icon to connect to WIFI. connected, click Remote Trail CAM in the upper left corner to automatically jump to the image interface.
9. In this interface, you can browse the pictures and parameter settings of the SD card, and you can also take pictures and videos manually. 10. Icon description.
ANDROID SMART PHONE TURN ON WIFI " 2. Select in the Bluetooth list, "BLE Device-XXXXXX".
3. Click WIFI SETTING to enter the WIFI list. 4. In the WIFI list, select the WIFI name displayed on the camera screen "G500-WIFI-XXXXXX".
5. Enter the password "12345678" and click the Connect icon to connect to WIFI. click the return button to automatically jump to the image interface.
7. In this interface, you can browse the pictures, videos and parameter settings of the SD card, You can also take photos and videos manually. 8. Icon description.
USING THE CAMERA Operating Buttons 1. :Page up. 2. :Page down. 3. :Page left. 4. 5. :Page right/ Shot key OK : Save settings. OK : Review photos and videos in the AIM mode. OK M ON AIM OFF EJECT M M :Exchange between main screen and setup. 7.AIM mode: To program camera. 9.ON mode: When movement occurs in the monitoring region, the camera will take pictures or videos automatically according to the previous programmed setting.
ITEM SETTINGS Settings Menu To view the camera settings menu, press(M) in the AIM mode.
Setting Items Sub menu There are 3 modes to choose from Photo Video, Photo& video Photo/Video Photo Video Description Image Size -5MP, 16MP , 30MP Image size can be selected. Capture Number -Number of photos per PIR capture. Can select 1-6 images. Video Size Video Length 2560x1440P,and VGA :640x480P video -Video Length: Select between 5,10,20, or 30 seconds. We recommends setting the video length for more shorter tomaximize battery life.
Setting Items Interval Sub menu 2second -60second 5minute-60minute Description This interval means how long the PIR will be disabled after each triggering in the ON mode. During this time, the PIR will not react motion. The minimum interval is 2 seconds and the maximum is 60 minutes. -Set the sensitivity of the sensor. LOW Sensor Level Middle High Flash Modes -Low sensitivity, Middle sensitivity, High sensitivity can be set .
Setting Items Set Active Time Sub menu ON Start 00:00 Stop 00:00 ON Yes/No - ON The camera would always worked within the active time you set up. TL Freq -Time lapse delay: Can select 5, 10 ,15, 30, 60 minutes. For example, set the interval to 5 minutes, the camera will take a photo each 5 minutes. TL period The camera will take photos automatically during the 2 blocks of time you set up at“A”and“B”.
Setting Items Default Sub menu Yes/No English Language Deutsche Description -Returns to default settings. Default settings are as follows:English, Photo,5MP,1Pict, Serial number and so on. -English , Japanese, Deutsche can be selected as camera language. Camera Name Camera Name 12345678 Software Update Update Version BT1.
MOUNTING After the setting the camera’ s time/date and other options to your preference , you’re ready to take it outside and begin capturing images of animals in the area you want to monitor. When mounting the camera to a tree, use the adjustable web belt provided. Please be sure to mount it in place correctly and securely. To get the optimal picture quality, the tree should be about 10-30ft. away from the place to be monitored, with the camera placed at a height of 3.6-4.5ft.
TECHNICAL SPECIFICATION Resolution 5MP Native Sensor/Up to 30MP Interpolated Trigger Speed 0.
WIFI IEEE802.11b/g/n Bluetooth 5.0 BLE Battery Life Up to 18 mouth LCD Screen 2.0" LCD Screen Button Interface Backlit 6 Button Attachment Interface 1/4"-20 Brass Insert Bottom w/Dead Stop Case Color Camo Dipped Front Case Power Source 8AA 12V DC IN 12V DC In Cable Lock Compatible Yes, Closed Dual Slot Above Dual Strap Slot Accessories Nylon Strap with Buckle Weight (Product without packaging) Less Than 273.
FAQ CAMERA WON’T POWER UP battery spaces with no“gaps”. 2.We recommend using a full set of 8 Energizer® Lithium AA batteries. 3.Make sure that the batteries are installed correctly, observing proper polarity. 4.Please be sure to switch the power“OFF”and remove the batteries if necessary. Trying to reopen the camera after 1 min.
FAQ CAMERA STOPS TAKING IMAGES OR WON’T TALK IMAGES 1.Please make sure that the SD card is not full. If the card is full (display indicates ”FULL”, the camera will stop taking images.) 2.Make sure that the power/mode switch is in the ON position and not set to OFF or AIM. 3.Make sure that you are using a good quality SD card in your camera. We recommends SanDisk® SD cards up to 32GB. 4.If the SD card has its write protect switch in the lock position, the camera will not take images.
FAQ BATTERY LIFE IS SHORTER THAN EXPECTED 1.Check to make sure you have used new alkaline or lithium batteries. We recommends using a full set of 8 Energize® Lithium AA batteries to obtain maximum battery life. 2. These are several variables that will determine the battery life including type of batteries, temperature outside, recording settings, frequency of camera activity, etc. Colder temperatures, night photos and photo frequency (low camera delay) will result in shorter battery life.
FAQ CAMERA PIR WON’T WORK 1.Check the Interval time you settings. It won’t take images for a long time if you setting settings. 3.Higher temperature will make the PIR detection distance become shorter. So that sometimes the animal will not be monitored even it is through by the PIR sensor’s detection of activity in the area it covers. Please be sure to mount the camera in place correctly and securely. The height is need to keep the same between the animal and camera.
FAQ Setting a camera up over water is also a potential cause for this issue. To remedy this situation. 1.Try moving the camera to an area that does not have any of these issues or remove potential obstacles near the lens if possible. 2.If the camera continuous to take images when there is no subject in them, test the camera by placing it in an inside environment and aiming at a location where there is no motion. If the camera continuous to show issues, then there is probably an electronic component issue.
FAQ 3.Night photos or video appear too bright 3m from the camera. Subjects may appear too light at closer distances. your problem ASAP.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.