User's Manual

Page 1

Infinite Play Controller User Manual

1. Introduction

Thank you for purchasing PS3 wireless gamepad which designed for PS3 console and

applicable to all PS/PS1/PS2 games. With it you can enjoy the most funny game and happiness.

2. Features and Specification

1) 3×AAA battery or battery pack;

2) Four LEDs indicate channels;

3) PS button for setting on PS3 console;

4) Low power consumption(sleep mode);

5) FC (force connection) function;

6) Compatible with all PS3 consoles, including U.S. version, Japan version, and Europe

version;

7) ISM frequency: 2.402Ghz ~ 2.480Ghz;

8) Available 20pcs RF controllers playing at most within valid range concurrently;

9) Transmission of over 7 meter straightaway range is available;

10) Low voltage alert and charge LED indicator.

3. Connection & Installation:

1) Power on PS3 console;

2) Put batteries into

cell box;

3) Power on wireless gamepad, at this time, four LEDs flash slowly;

4) Press FC button till the four LEDs flash quickly;

5) Plug wireless receiver into PS3 console, LED begin to flash slowly;

6) Pressing PS button for connection, the LED that indicate present channel light on.

Connection is finished.

Remarks: Please follow step 3rd to 6th for connection if you use it for the first time. Under

connection, you can press PS button to make gamepad connected with console automatically

after connecting receiver to console.

4. Operation Method:

1) Press and hold PS button more than two seconds to enter into setup menu. After conversion,

digital mode will be invalidation, and anolog mode will be located in PS3 game;

2) Different LED was assigned to indicate different channel as the following groups at selecting

channel:

LED1 ~ 4 = Player 1~ 4

LED1 + 4 =. Player 5

LED2 + 4 =. Player 6

LED3 + 4 =. Player 7

Remarks: During the operation of console, every time, when you pull out and plug the

receiver into PS3 USB port or restart PS3 console and press PS follow the system prompt, you

should press the PS button for playing.

5. Low Power Consumption (Sleep Mode)

To conserve power and prolong the life of batteries, wireless gamepad was designed to low

power consumption to enter into sleep mode as the following conditions:

PAGE 1
Infinite Play Controller User Manual 1. Introduction Thank you for purchasing PS3 wireless gamepad which designed for PS3 console and applicable to all PS/PS1/PS2 games. With it you can enjoy the most funny game and happiness. 2. Features and Specification 1) 2) 3) 4) 5) 6) 3×AAA battery or battery pack; Four LEDs indicate channels; PS button for setting on PS3 console; Low power consumption(sleep mode); FC (force connection) function; Compatible with all PS3 consoles, including U.S.
PAGE 2
1) 2) 3) No receiver was detected under connection, the gamepad will enter into sleep mode after fifty seconds; Under connection, no operation on gamepad over ten minutes; Press PS button to exit sleep mode, the LED of working channel light on. 6.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.