User's Manual

ManualsBrandsShenzhen Litestar Electronics Technology ManualsElectronicsfm transmitter with LCD

IP163 – Universal FM Transmitter w/LCD

INSTRUCTION MANUAL

Thank you for purchasing the Logic3 IP163. As with all Logic3 products

the IP163 has been built to the highest manufacturing standards and

testing throughout its development to ensure you get the best possible

product. Please read through and familiarise yourself with this manual

before you use the IP163.

• Transmits to any FM frequency between 88.1MHz to 107.9MHz

• LCD display with blue backlight

• Time & temperature display’s

• Powered by 2 x AAA batteries or the car power plug (supplied)

• Auto switch off

Power Input

12V power

Red LED

LCD Info

Frequency

Select

●Select

W or X select

3.5mm Stereo

Power

Button

USB

User Instructions

Caution

Do not connect the FM Transmitter before or when starting the car to

avoid any possible power surges or damage to the FM Transmitter or

audio device

Power Connection

Via Batteries

1. Insert 2 x AAA batteries into the battery compartment at the rear of the FM

Transmitter.

Summary of content (5 pages)

PAGE 1
IP163 – Universal FM Transmitter w/LCD INSTRUCTION MANUAL Thank you for purchasing the Logic3 IP163. As with all Logic3 products the IP163 has been built to the highest manufacturing standards and testing throughout its development to ensure you get the best possible product. Please read through and familiarise yourself with this manual before you use the IP163. • • • • • Transmits to any FM frequency between 88.1MHz to 107.
PAGE 2
or Via Car Power Plug 1. Connect the 12V Car power plug to the vehicle cigarette lighter socket. 2. Connect the other end of the car power plug to the power socket at the bottom of the FM Transmitter. 3. The red LED power indicator on the car power plug will light up indicating there is power to the device. Switch FM Transmitter ON/OFF Press and hold the Power Button for 2 seconds to switch the FM Transmitter ON/OFF. Connecting to iPod or other portable audio devices 3.5mm Stereo connection 1.
PAGE 3
FM Transmitter mode Battery level Transmitter indicator Temperature display Frequency display Selecting a frequency 1. Press the Frequency Select U or V buttons on the transmitter to select a between 88.1 MHz to 107.9MHz. 2. Select the “FM Band” on the Car stereo and tune to the same frequency as selected on the FM Transmitter. Select the corresponding frequencies that offers the clearest possible signal. 3.
PAGE 4
TROUBLE SHOOTING GUIDE • • No sound will play through to the car stereo speakers: o Check the frequency on the car radio is the same as the frequency selected on the FM Transmitter. o Try selecting another available frequency on the FM Transmitter and tune the same frequency to your car stereo. o Check the volume on the car stereo. o Check the volume on the MP3 player / Audio device. o Check the car stereo band is tuned to FM.
PAGE 5
Section 15.105 Information For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.