User's Manual

ManualsBrandsShenzhen Litestar Electronics Technology ManualsElectronicsTurbo Shock III Wireless Controller

Turbo Shock Ⅲ Wireless Controller User Manual

1. Introduction

Congratulations on choosing this RF motion sensing Controller, the ultimate accessory to PS3 games,

PS2 games, and PS1 games. With this product you can easily get

ps3 playing experience.

2. Features and Specification

1) Compatible with all PS3 consoles, including US version, Japan version, and EU version;

2) Four controller port indicator LEDs

3) Available 20pcs RF controllers playing at the same time within valid range;

4) With 6 axis motion sensing feature, it includes 3 axis translation motion(X,Y,Z) and 3 axis

rotational motion(pitch, roll and yaw).

5) With vibration feature (if the software supplies vibration)

6) HOME button for setting on PS3 console;

7) Sleep function and wake function;

8) FC (force connection) function;

9) ISM frequency: 2.402Ghz ~ 2.480Ghz

10) Available over 7 meter straightaway range;

11) Power supplied by 4 AAA batteries;

12) With 1 pcs mini USB power supply cable.

3. Connection & Installation:

1) Power on PS3 console.

2) Input the batteries

3) Turn the power switch to ON position, the four LED indicators are flashing simultaneously but

slowly.

4) Press FC button the four LED indicators are flashing quickly

5) Insert the receiver to PS3 console, four LED indicators are flashing slowly again

6) Press HOME for connection and then the port indicator LED turns to stable and you can start to

play.

Remarks: Please follow step 3-6 if you are using the controller for the first time. For succeeding usage,

after inserting the receiver to the PS3 console, press HOME button, the controller can automatically be

connected.

4. Operation Method:

1) The HOME button of the controller will work as PS button function of PS3 controller. When you

press the HOME button and hold it for 2 seconds, it will enter the PS3 XMB windows and will be

default as analog mode

2) The LED number indication will represent the game pad number the game pad is assigned to:

LED1 ~ 4 = Player 1~ 4

LED1 + 4 = Player 5

LED2 + 4 = Player 6

LED3 + 4 = Player 7

Remarks: Every time when you pull out and plug the receiver into PS3 USB port or reset PS3 console

or the screen hint you to press PS button, you must press the HOME button for start

5. Low Power Consumption (Sleep Mode)

1). In order to save power of the batteries and prolong batteries life, the wireless controller is designed to

enter sleep mode if the wireless controller has not been used for a period of time. There are two kinds

of condition that the controller could get into sleeping mode after you power on the controller.

Summary of content (3 pages)

PAGE 1
Turbo Shock Ⅲ Wireless Controller User Manual 1. Introduction Congratulations on choosing this RF motion sensing Controller, the ultimate accessory to PS3 games, PS2 games, and PS1 games. With this product you can easily get ps3 playing experience. 2.
PAGE 2
A, under the power-on condition for controller, no receiver is found over 55 seconds; B, Under the power-on condition for controller, no any operation acts on any button or axes over 10 minutes; 2). To exit sleep mode, press HOME button, and the current port LED indicator illuminates. 6. FC function (short for “Force Connection”) 1) You can assign a RF controller to an appointed receiver when many RF controllers work in the same operating instance.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.