User's Manual

LHB15 USER MANUAL

1.Location of Controls

A：previous song/decrease volume

previous song:quick press

decrease volume:long press

B：ON/OFF:long press

play/pause: quick press

C: answer call:quick press once

dial number: quick press continuously twice

D：Micro USB charging port

E：next song/Increase volume

next song:quick press once

increase volume:long press

2. How to use it?

A.Pair the headphones with a bluetooth enabled device

Turn the headphone On by long press the power switch,a tone will be heard and the LED indicator

light will alternately flash RED and BLUE.

Keep your bluetooth headphone and bluetooth enabled device within 3feet of each other during the

pairing process,set your mobile phone or other bluetooth enabled device to search for Bluetooth

devices.

When the bluetooth enabled device finds the headphone,select” SBT558” from the list of found

devices.If required,enter the password 0000.Select Ok or Yes to pair with your device.

After a successful registration,a tone will be heard and the LED indicator light will slowly blink

BLUE.

PAGE 1
LHB15 USER MANUAL 1.Location of Controls A：previous song/decrease volume previous song:quick press decrease volume:long press B：ON/OFF:long press play/pause: quick press C: answer call:quick press once dial number: quick press continuously twice D：Micro USB charging port E：next song/Increase volume next song:quick press once increase volume:long press 2. How to use it? A.
PAGE 2
Note: if you would like to connect the headphones to another device,you must unpair the headphones from the currently paired device first.On your device’s bluetooth settings,select “PBT89”,then select “unpair”.When the headphones have been unpaired,it automatically goes into pairing mode again. B. Using as wired headphones Switch On the headphone.Connect the one end of the included 3.
PAGE 3
FCC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.