User's Manual

New MagMount Qi User Manual
PITAKA New MagMount Qi *1
Charging Cable *1
User Manual*1
9
1 2
3 4 5 6 7
8
Compatibility Notice:
Package Contains:
Quick Guide
Step 2: Install the New MagMount Qi on your car
1，Installing the PITAKA Car Vent New MagMount Qi
Find a safe location on the vehicle vent, slide the New
MagMount Qi air vent clips into your car’s air vent.
2， Installing the Suction Cup New MagMount Qi
Find a proper location on the windshield or the dashboard,
and clean the surface. Then firmly press the suction cup
and press down the suction switcher to ensure the New
MagMount Qi is adhered tightly to the windshield or
dashboard.
*Notice: Remember to press the suction cup on the
windshield FIRST, then press the suction switcher and lock
to ensure that you have tightly adhered the New
MagMount Qi to the windshield.
2.1 Firmly press the suction cup against the windshield.
a) Push down the suction switcher to lock the mount in
place.
2.3 Then the MagMount Qi is attached on the windshield
tightly.
3. Installing the CD Slot MagMount Qi
Simply insert the slot mount and tighten the screw to
lock it in place
3.1 Insert the mount in the CD slot
3.2 Tighten the mounting screw to lock the mount in
place.
3.3 Then MagＭount Qi (CD Slot) is installed well
Notice: A dashboard pad is needed when you attach
it on your car’s dashboard.
The PITAKA New MagMount Qi will only wirelessly
charge any Qi supported phones with a proper PITAKA
MagCase (Pro).
Wireless charging may not work when you put other
cases or stick metal plates on your phone.
Do not use the New MagMount Qi to charge your
wireless charging devices that are not Qi-compatible
wirelessly.
Step 1: Connect the cable to the New MagMount Qi’s
USB port and your car charger’s USB port. Plug the car
charger into your car’s power outlet.