4K Vehicle Blackbox DVR USER MANUAL -1-
Thank you very much for purchasing our car dash cam! Disclaimer: 1. Please read the set-up and usage instructions carefully before operation. 2. You should not set/install this dash cam at a place that would obstruct or reduce a driver’s view. Make sure your usage comply with pertinent vehicle codes of your state, province, territory or country. 3.
normal functionality. 7. You should examine, check and verify the dash cam at least every 6 months, including the memory card, to ensure the video reception and recording are working properly. For each use, you should verify that the dash cam unit, the visible lights and the audible sounds are working normally. If there are signs of non-operation or malfunction, you should immediately seek to replace the product and check to see if the product is covered under any applicable warranty. 8.
DEVICE MAY DISLODGE AND BECOME UNSAFE FOR PASSENGERS. Note : 1. This user manual will detail how to use, operation, technical specifications and precautions. Before use, please read this manual thoroughly and fully understand, Please keep this manual, we hope our products can meet your needs and long-term service to you! Using this product, enjoying the real high quality life. 2.
. Do not use the thrill chemical substance, clean solvent or cleaner to clean this machine, please use the moist soft cloth to clean. 6. Do not use this machine under the condition that the dust and high density, to avoid affecting the video. 7. Please protect the environment, don’t discard this machine randomly; do not throw this machine into fire, otherwise will have an explosion. 8.
Content Guide 1. Product Structure 2. Product Installation Guide 3. Product Precautions 4. Product Specifications 5. App Operation Instructions 6. GPS Player Software Installation and using Instructions 7.
1. Product Structure 1. Power 2. WiFi 3.GPS 5. Speaker 6.Front Cam 9.Micro SD Card Slot 7. Micro USB Port 10.Dust proof Cover 12.Charging Indicator Light 14.Gesture Sensing 4.Micro USB 8.Reset 11.Indicator Light 13. 3.0” OLED Touch Screen 15.
Keys and Functions Key Function Instruction WiFi Turn on/ off the WiFI 1.Turn on：Short press WiFi to turn on 2.Turn off：Short press WiFi to turn off Power Turn on/Turn off Reset Reset USB port Charging/USB storage/Web camera 1.Turn on：Short press Power to turn on and indicator lighted 2.Turn off：Long press Power to turn off and indicator off When device crashes, shot press here to reboot 1.Connect to PC by USB cable，we can check video/photo and charge/ as the web camera for PC 2.
4. Insert the car charger into the car cigarette lighter, and please use the standard 1.5A car charger. 5.Install the rear camera on the rear of the vehicle and pay attention to the direction of the camera when installing. Pave the cable alongside the roof of the vehicle. After the installation is completed, put the rear plug into the rear camera interface of the dash cam, and connect the red reverse cable of the rear camera to the positive pole of the reverse lamp. 6.
power supply, and do not insert or pull out any machine accessories in the status of Power-on, including: rear camera, SIM card, SD card. These actions should be completed when power is turned off. 3.When the car key is plugged into the vehicle, the dash cam will automatically turn on. Please check whether the function of power on/off, the front and rear cameras and the rear view display are normal. 4.
4.Product Specifications Product Feature G-sensor Screen Lens Photo Resolution Video Resolution Video Code-c Aperture Language Color Loop Recording Auto turn on/off while vehicle power on/off Motion detection Year/Month/Day/Ho ur/Minute Photo Format Memory card 4K, Dual 1080P dash cam Built-in(to save the file if emergency, and can ‘t be deleted if the collision of vehicles happen) 3.0” OLED Touch Screen 150 Degree ultra wide angle VGA/1.
MIC Speaker GPS USB port Power Interface Battery Parking Mode Working temperature Support Support Built on bracket 1：Storage 2：Charging 3.Power on and recording 5V 1.5A 400mAh Built-in Li-ion Battery Support -10°C to 60°C 5.App Operation Instructions Downloading “LuckyCam” App Android system mobile phone Open the "Google play store" search "LuckyCam" to download and install. Open the APP "LuckyCam", click "Switch Connected Devices", then click on "WiFi settings" .
iOS system Apple phone Open the "Apple store" search "LuckyCam" to download and install. After the installation is completed, if you want "LuckyCam" access to cell phone photos, please click "OK" (Note: you must select "OK", otherwise you can not preview the pictures download by APP ) Open the phone WiFi settings, search the WiFi Hotspot, search the dash cam’s WiFi, enter the password: 12345678.
Click to exchange the preview interface of front cam and rear cam - 13 -
Click to take photo Click to turn on the audio function Click to set the video resolution Click Click Click to stop or begin recording to take photo to set photo resolution Click to check the files Click to check videos Click to check photos Click to download the files Click to delete the files Click to set the dash cam 6. GPS Player Software Installation and Using Instructions If need check the GPS information , the professional player must be installed firstly 1.
Using the player software: 1.Please open the customized video player and install it for the first time use. 2.
7.FAQ Under normal operating conditions, if there is problems with the device, please refer to the following methods to solve. Q: Cannot take picture and record A: Please check whether there is enough space for of TF card, or if it is locked. Q: Stopping automatically while recording A: Due to the huge amount of HD video data, please use high-speed C10 TF card with SDHC compatible, there will be the mark of C10 on the TF card.
Q: Dark image when when shooting the scene of sky or water A: There will have an impact on the exposure when the big difference between the scene. Please adjust the “EV” in the menu setting. Q: The color is not good in the cloudy or indoor A: Please check the “white balance” is Auto or not in the menu. Q: Horizontal stripes interference in the image, A: This is due to the wrong setting of light frequency error, please set the frequency 60HZ or 50HZ according to the local power supply.
