Limcet BOX Model : Limcet Link User manual
1. Introduction Thank you for choosing to use this Limcet BOX.
Charging current:≤ 1.5A.when the USB charging current is > 3A, the host computer of the radio and receiver should start the circuit protection function to control the current below 1.5A to avoid burning the product. 3. Packing List This car system consists of the following 9 units: 1080P video decoding, lossless music, Bluetooth hands-free, Mirroring, CarLife, Android Auto, rear view, AV-IN, Carplay, Hicar system settings.
5. Interface introduction 6. System settings Regarding system settings, after the vehicle is started, the main interface of the vehicle system will be displayed. In the main interface, there is a [Settings] button. You can directly click the setting button to enter the main setting page. As shown in the following figure: each setting page of the system. Chart 2.
System settings "Original car settings"-"Driving-reversing camera" option System Settings "Original Car Settings"-"-Panel- Contrast" Brightness" adjustment page In this interface-click to show Enter brightness, contrast, chroma, saturation adjustment
7.
8. About network usage The vehicle system uses the mobile phone's own network to use, and the traffic cost refers to the connected network. When the car system is connected to the wireless CarPlay, you only need to manually connect the Bluetooth of the mobile phone for the first time, and keep the Bluetooth of the mobile phone always on.
FCC Caution. (1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.