Installation Instructions

QUICK START

Please install the batteries

for the remote control.

Plug the power cord into

an outlet.

Take off the lens cover.

Rotate the adjustable foot

Place the projector on a flat

surface.

Press the power button to

turn on the projector.

Press the power button on

the remote control to turn

off the projector.

Rotate the lens to focus.

iOS Device Mirror

USB Connection

HDMI Connection

Android Device Mirror

INPUT SOURCE

Side

Keystone Advanced

4-Point Keystone

Digital Zoom

Projection Mode Front-Desktop

Take one point as the standard, adjust the other three points

until the screen is rectangle.

PAGE 1
QUICK START 1 Please install the batteries for the remote control. 2 Plug the power cord into an outlet. 3 Take off the lens cover. 4 Rotate the adjustable foot 5 Place the projector on a flat surface. 6 Press the power button to turn on the projector. Rotate the lens to focus. 7 Press the power button on the remote control to turn off the projector.
PAGE 2
A30 USER MANUAL Please read this manual thoroughly before use and keep it handy for future reference.
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.