IX-SW112 Switch mini Wireless Controller Specifications File： Date：2019/09/18 Version： A4 Model: IX-SW112 Ⅰ. Controller schematic diagram Note：3D Left Joystick can be L3 when vertical press; 3D Right Joystick can be R3 when vertical press, reset button is a little hole on back of the controller.
IX-SW112 Switch mini Wireless Controller Specifications File： Date：2019/09/18 Version： A4 Ⅱ. Overview 1.Support Nintendo Switch Console above 3.0.0. 2.Wireless Controller Bluetooth transmission distance is 8-10M without barrier. 3.Wired mode support SWITCH, PC XINPUT and PC D_INPUT. 4.Controller buttons: Up, Down, Left, Right, A, B, X, Y, L, R, ZL, ZR, L3, R3, +, -, HOME, Screen capture, reset. 5.Support two 3D analog joysticks. 6.
IX-SW112 Switch mini Wireless Controller Specifications File： Date：2019/09/18 Version： A4 succeed, blue channel lights is allocated by Switch console and that shows player can start game. 4. PC wired connection (PC mode not support Bluetooth connection) Wired mode support X-INPUT & D-INPUT, shift by pressing HOME button 5s and support dynamic shift, no need to re-insert controller USB cable. Also it memories previous operate mode.
IX-SW112 Switch mini Wireless Controller Specifications NO. Item File： Date：2019/09/18 Version： A4 Standard Parameter 1 Rated Voltage 3.7V 2 Rated Capability 350mAh 3 Internal Impedance ≤120mΩ 4 Charge Limit Voltage 4.20±0.05V 5 Discharge Limit Voltage 2.8±0.05V 6 Overcharge Detection Voltage 4.275±0.025V 7 Overcharge Release Voltage 4.175-0.025V 8 Discharge Limit voltage 2.8±0.05V 9 Over-discharge Detection Voltage 2.75±0.08V 10 Over-discharge Release Voltage 2.85±0.
IX-SW112 Switch mini Wireless Controller Specifications File： Date：2019/09/18 Version： A4 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
