Installation Instructions
Thanks for purchasing this product.
Please read this Manual carefully before use.
Press the physical button
1. Wake up the device.
2. Check battery.
3. End medication reminder.
Press and hold the physical button
1. Bluetooth pairing and binding.
2. Bluetooth unbinding.
Blue LED
1. Power on (blue light flashes once).
2. Wake up (blue light flashes once).
3. Bluetooth binding is successful
(blue light flashes once).
4. Bluetooth pairing (blue light flashes
60S).
Green LED
1. Medication reminder (green light
flashes 20S).
2. Battery check (battery > 20%,green
light flashes 3 times).
3. Find pill box (green light flashes 3
times).
Red LED
1. Batter check (battery < 20%,red
light flashes 3 times).
2. Low battery reminder (battery is
less than 20%, the pill box red light
flashes 3 times every 2 hours).
1. Medication reminder,the buzzer
will sound.
2. Find pill box,the buzzer will sound.
Insert the MicroUSB charging cable
into the charging hole of the pill
box to charge
Scan the following QR code to
download “ilife+”or search for and
download “ilife+”in “APP Store”
on your phone.
Turn on the APP and Bluetooth;
Press and hold the physical button of
pill box, the blue light flashes;
Search and select the pill box in the
APP;
Finally,bind the pill box in the APP.
Supporting features such as:
Medication reminder, low battery
reminder, medication plan,
medication record, find pill box.
Model：
Battery Type：
Battery Capacity：
Battery Life：
Operating Temperature：
P2
200mAh
90 Days
0~60℃
1. To prevent device failure,fire and
explosion,never place the device in
any extremely-high-temperature or
extremely-low-temperature area.
2. To prevent device damage,always
protect the device against strong
impact or shock.
3.Do not disassemble or modify the
device without authorization.Any
device failure should be referred to
our after-sales service personnel.
Lithium battery
Any Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference that
may cause undesired operation.
Note: This equipment has been tested
and found to comply with the limits
for a Class B digital device, pursuant
to part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against harmful
interference in a residential installation
. This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
—Reorient or relocate the receiving
antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an
experienced radio/TV technician for
help.
This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment.
Bluetooth： V 5.0 LE