User's Manual

Product Manual

Technical Parameters

Product Type: LEPOW-HI Smart Pack

Bluetooth Version: 3.0

Transmission Radius: 10m

Standby Time: 160h

Features: Multi-point connection

Bluetooth Chip: CSR BC6145

Bluetooth Protocol: HSP,HFP,A2DP

Please note:

Before trying the new product, please fully charge the bag，pair it with

selected Bluetooth device and set up the Smart Node.

1. About the product

A. Receive/End a call/Turn on/off button (MFB)

B. LED indicators

C. Loss-prevention vibration Smart Node

2. Turning on and off the Smart Node

Hold the MFB for 2 seconds and a blue light will flash to indicate it is

on or awake.

Hold the MFB for 4-5 seconds and a blue light will flash intermittently

to indicate it is paring.

Hold the MFB for 3 seconds and the blue light will flash with a

continuous vibration before shutting down.

3. Pairing the Smart Node to the phone

a. First time

Turn on the Smart Node. When LED indicator is blue and flashing

continuously, it enters automatically the pairing mode. Search on your

phone for the Bluetooth connection named: LePow-303 and connect. If

failed, please pair it again.

b. Subsequent pairing

Turn on the Smart Node. Hold the MFB for 2 seconds until the indicator

will flash. The headset will return to the connection to the phone.

4. The Smart Node function

PAGE 1
Product Manual Technical Parameters Product Type: LEPOW-HI Smart Pack Bluetooth Version: 3.0 Transmission Radius: 10m Standby Time: 160h Features: Multi-point connection Bluetooth Chip: CSR BC6145 Bluetooth Protocol: HSP,HFP,A2DP Please note: Before trying the new product, please fully charge the bag，pair it with selected Bluetooth device and set up the Smart Node. 1. A. B. C. About the product Receive/End a call/Turn on/off button (MFB) LED indicators Loss-prevention vibration Smart Node 2.
PAGE 2
Answering a call: Press the MFB less than 1 second on the Smart Node to answer a call. Ending a call: Press the MFB again to end the call. Decline call: Hold the MFB for 1-3 seconds to decline in-coming call. Voice dial: Press the MFB to start voice dial. To ensure the better effect, we suggest the user wear a headset to record the last voice dial. Double press the MFB and it will automatically dial the last call number. 5.
PAGE 3
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.