User's Manual Part 2

ManualsBrandsShenzhen lemega Technology ManualsElectronicsM5+ HiFi MUSIC SYSTEM

13 of 38

12 of 38

Adjust each value with the Select control. As each value is set by pressing the

Select control, the next value becomes active ready for adjustment.

Auto-update

Auto-update works with data sent over DAB, FM or the Internet. The clock is

only updated when in a corresponding mode, so it is best to select a mode you

use regularly.

DAB and FM use time signals broadcast with radio transmissions.

Network uses a time signal sent from the Internet radio portal when in any

network-connected mode.

1.Select Update from DAB, Update from FM, Update from Network or No

update.

2. If you are updating from the network, set your time zone.

3. If your country uses daylight saving, the automatically updated time from

the network may be wrong by one hour. When daylight savings are in effect

(during the winter), turn on the Daylight savings option to rectify this.

Note that if you are updating the time from DAB or FM, the Daylight savings

option has no effect on the clock's time.

M5+ will auto-update from the selected source when time information is

available.

Manual set

If you set No update, the wizard now prompts you to set the time and date

manually.

The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM with the

first value, dd, active (flashing).

Adjust each value with the Select control.

As each value is set, the next value becomes active and flashes.

3.1.3 Network

M5+ is compatible with all common network protocols and encryption

methods, including Wi-Fi Protected Setup (WPS).

To connect M5+ to your network, you need a Wi-Fi wireless router, together

with password key if set Select WLAN region/country >Wi-Fi network (SSID),

and then select a network from the list.

If the network is open (non-encrypted), M5+ connects and no further details

are required; see Completion below.

Standard encrypted network

To enter the network’s key (password), use the Select control to highlight the

next relevant character and press to select each character in turn. As each

character is selected, the key is built up near the top of the display.

The three options – Backspace, OK and Cancel are included in the selection

loop.

These can be accessed just using the Select control, or, a short cut Is

available, pressing the Info key, which moves the selection highlight to the

Back Space option.

WPS setup

WPS encrypted networks are identified by ‘[WPS]’ at the start of the network

name, and have two methods of connection. Select one and follow the

prompts. When using the network wizard an additional option to Skip WPS is

available.

Select one and follow the prompts:

Summary of content (7 pages)

PAGE 1
Adjust each value with the Select control. As each value is set by pressing the Select control, the next value becomes active ready for adjustment. 3.1.3 Network M5+ is compatible with all common network protocols and encryption methods, including Wi-Fi Protected Setup (WPS). To connect M5+ to your network, you need a Wi-Fi wireless router, together with password key if set Select WLAN region/country >Wi-Fi network (SSID), and then select a network from the list.
PAGE 2
Ÿ Push Button M5+ prompts you to press the connect button on the router. It then press the select control. Ÿ Pin > (code number) M5+ generates an 8-digit code number which you enter into the wireless router, access point. M5+ remembers the last four wireless networks it has connected to, and automatically tries to connect to whichever one of them it can find.
PAGE 3
Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ access code, your e-mail address, passphrase, radio model (M5+). If you already have an account and wish to add an additional radio, log in to your account and select My preferences > Add another Wi-Fi radio. Once your radio is registered with the portal, you can immediately use the Internet radio favorites and added stations features. 3.4 Setting up a music server In order for M5+ to play music files from a computer, the computer must be set up to share files or media.
PAGE 4
*) To change the name of your device, right click on icon and choose properties. Then choose UPnP and click on “device webpage”. 4. Internet radio mode M5+ can play thousands of radio stations and podcasts from around the world though a broadband Internet connection. When you select Internet radio mode, M5+ contacts the Frontier Silicon Internet radio portal to get a list of stations, organized into different categories like Country, Most popular and Genre.
PAGE 5
4.1 Last listened When Internet radio mode restarts, the last-listened station is selected. To select another recently used station, select Menu > Last listened then one of the stations listed. Most recent stations appear at the top of the list. 4.2 Presets Presets are stored in the radio and cannot be accessed from other radios. To store an Internet radio preset, press and hold Preset until the display shows the Save preset screen. Select one of the presets to save the currently playing station.
PAGE 6
4.7 Now playing information While the stream is playing, the screen shows its name and description. If artist and track information is available, this is also shown. To view further information, press Info . You must have a Spotify Premium account to get full access to millions of songs from Spotify archive, all with adequate sound quality. If you do not have it, you can go to www.spotify.com/freetrial for a 30 - day trial.
PAGE 7
You can use << and >> to move through tracks. Press and hold to rewind or fast forward and press quickly to select previous or next track. 6.1 Shared media (from UPnP media server) Select Menu > Shared media > If you have set up shared media, you should see an entry consisting of : , for example JB-Laptop: Audio. If you have more than one computer sharing media, the alternatives are listed. Select the shared media you want to play. wake the server up and connect to it.