Post Kiosk Manual Global Intelligent Self-service Kiosk Provider www.lkskiosk.com / www.lien.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Catalogue Post KioskDesign…………………………………………………………………………………………………………………………...3 Product Warranty…..…………………………………………………..........………..……….............................................................3 Warranty Instructions ……..............………………………………………………….......................................................................3 Description of Warranty Period …………………………………….……..................…..............................................................
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Post Kiosk External Design Product Warranty ■Warranty Instructions This Post Kiosk is guaranteed by LKS that will provide 12 months warranty for main hardware parts since the date of shipment. For the defective parts confirmed by both parties, customer need to return the defective parts to LKS for repairing or replacement.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 LKS after-sales service tel: 4008791755 (Office Hours: Monday to Sunday, 8:30am to 9:00pm Beijing time) Under the Following Circumstances, the Damaged Parts are not Covered by the Warranty.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Installation Guide Introduction This Post Kiosk is a type of intelligent terminal which is used in the intelligent identification management system of the parking lot. The purpose is to realize 24 hours unattended management payment of the parking lot for the property management company, and to provide the owners with a more convenient and efficient way of self-service inquiry and payment. Shenzhen Lean Kiosk Systems CO.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 ▶Drainage System: Since the air conditioner and dehumidifier inside the kiosk will discharge a small amount of water from the bottom during the operation, the ground installation platform for the kiosk must be designed and reserved smooth drainage holes in advance. Mounting Instructions for the Kiosk Base Post Kiosk will be installed on the street for use, and it should be installed on solid and reliable concrete ground.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Dimensions of PostKiosk Overall Dimensions ▶ Height: 56.1 inch ▶ Width: 9.8 inch ▶ Depth: 9.1 inch Device Weight ▶ Gross Weight:154 lbs ▶ Net Weight:121lbs 7 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Post Kiosk Main Hardware Layout ( Post kiosk hardware layout) Construction of Post Kiosk Base The surface of the poured concrete base used to install the kiosk must be a standard horizontal plane.If install the kiosk in a slant base, it may cause the kiosk fall down or malfunction.The poured concrete base shall not be too high from the horizontal ground, so that users with disabilities can operate the kiosk normally while sitting in a wheelchair.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 2. The power cord and network cable will go through from the bottom /base of the kiosk then enter into the kiosk cabinet, and the ground installation platform should pre-set the entrance hole for the cables in advance. 3. Since there are drain-pipes from air conditioner and dehumidifier inside the kiosk bottom, the ground installation platform for the kiosk must be designed and reserved smooth drainage holes in advance. 4.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Schematic Diagram of Fixed Mounting Hole at the Bottom Unpacking Instructions Before unpacking the kiosk, please double check whether the outer plywood box is damaged or damp or in flowed during transportation process or not. After the whole kiosk unpacked, please double check whether the internal devices, the power supply cords, and signal cables are loose or not.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Protective Gloves Warning: Before unpacking, workers should wear protective equipment such as goggles and protective gloves to ensure the safety. ■Product Accessories List Product Brochure ( Soft copy) Front and back door keys 2(Piece) Desiccant 5(Bag) φ0.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 ▶The default setting of the kiosk computer is "Power on" status before delivery. After the kiosk is switched on, the computer will start up automatically and the display screen will start up normally. ▶If the computer cannot start up automatically after switch on the kiosk, please double check whether the power cord of computer is loose or not or press the power-on button as shown in below picture again.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 ■Manual Setting After the power on and the dehumidifier passes the self-check, it will automatically enter the automatic mode, and the digital tube will show the current temperature and humidity in turn for 2 seconds. When the humidity reaches the start threshold, it will start automatically (manual/automatic light on) and stop working (manual/automatic light off) if it is lower than start threshold minus return difference.
Shenzhen Lean Kiosk Systems Co.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Maintenance Guideline Introduction This Post Kiosk is a kind of self-payment terminal designed by LKS for the unmanned management of parking lot for car owners. Car owners can pay their bills by swiping credit CARDS, scanning barcodes, banknote and other payment methods. In order to make the kiosk work in the best state, regular maintenance should be done accordingly.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Nylon cable ties Electrical insulation tape Clean cotton Alcohol WD40 rust-inhibiting lubricant Flame retardant silicone Flashlight Goggle Anti-static nylon gloves Keys for kiosk front and rear door Attention:During the maintenance inspection process for the Post Kiosk, the main power switch must be disconnected.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 ■Replace the 6.5inch LCD Display 1. Open the kiosk back door and turn off the main power switch. 2. Unplug the display power cord, DP signal cable and ground line on the drive board in the back side of display screen and remove the wiring and ground cable on the touch screen drive board. 3. Loosen and remove the stainless-steel flange nut of M4 with the soft hexagon socket (0.28inch specification) and remove the whole display module from the device.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Attention:When embedded the 6.5inch display screen into the metal frame, it shall be stably installed and leveled to ensure that the screen and metal frame are on the same horizontal level ■Replace RFID Card Reader 1. Unplug the USB port from the card reader before removing it. 2. Loosen and remove the M4 stainless steel flange nuts with the hexagon socket (0.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 ■Replace the Intercom 1. Open the kiosk back door and turn off the main power switch. 2. Unplug the power DC head, microphone connector, call button connector, speaker audio cable, communication network cable, ground cable of the intercom module in turn. 3. Remove the 4-piece M3 stainless steel flange nuts holding the intercom module with the hexagon socket (size 0.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 ■Replace the Camera 1. Unplug the USB port on the back of the camera. 2. Loosen and remove the 2 pieces M4 stainless steel flange nuts from the camera mounting bracket with the soft hexagon socket (0.28inch) and remove the camera and bracket together. (As shown below left picture) 3. Remove the flat head screw that holds the bracket on both sides of the camera with a cross screwdriver and separate the camera from the bracket.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Whole Kiosk does not Work and Warranty Telephone ▶Check whether there is electricity in the power supply outlet of kiosk locations. ▶Check whether the main power switch of kiosk is On or not Attention:When performing internal inspection or disassembling kiosk parts, it must be ensured that the power supply is OFF ◆ If there are some problems of kiosks cannot be solved, please contact with the maintenance team or the factory directly.