In-lane Kiosk Manual Global Intelligent Self-service Kiosk Provider www.lkskiosk.com / www.lien.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Catalogue In-lane KioskDesign………………………………………………………………………………………………………………….3 Product Warranty…..…………………………………………………..........………..………....................................................3 Warranty Instructions ……..............………………………………………………….............................................................3 Description of Warranty …………………………………….
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; In-lane Kiosk External Design (In-lane Entry Kiosk) (In-lane Exit Kiosk) Product Warranty ■Warranty Instructions This In-lane Kiosk is guaranteed by LKS that will provide 12 months warranty for main hardware parts since the date of shipment.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Under the Following Circumstances, the Damaged Parts are not Covered by the Warranty.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Installation Guide ■Introduction This In-lane kiosk is a type of intelligent terminal which is used in the intelligent identification management system of the parking lot.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ▶ Power Supply Description: The input voltage of the kiosk in normal operation is "single-phase 110V AC voltage"; The power cord and network cable will go through from the bottom /base of the kiosk then enter into the kiosk cabinet, and the ground installation platform should be pre-set the entrance hole for the cables in advance.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ In-lane Kiosk Main Hardware Layout (In-lane Entry Kiosk Hardware Layout) (In-lane Exit Kiosk Hardware Layout) 7 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Construction of In-lane Kiosk Base The surface of the poured concrete base used to install the kiosk must be a standard horizontal plane. If install the kiosk in a slant base, it may cause the kiosk fall down or malfunction.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Hole Dimensions of Cement Base Standard cement base mounting hole size:10.5 inch* 7.7 inch ■ Schematic Diagram of Fixed Mounting Hole at the Bottom 9 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Unpacking Instructions Before unpacking the kiosk, please double check whether the outer plywood box is damaged or damp or in flowed during transportation process or not. After the whole kiosk unpacked, please double check whether the internal devices, the power supply cords, and signal cables are loose or not.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Instructions for Installing Printing Paper ▶ Make sure the printer is properly powered on. ▶ Tear the paper end towards to the printer slot neatly to ensure that the printer can absorb the paper normally.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Configuration of Air Conditioner Temperature Control System 1. After switching on the power, the device will start automatically, the display parameters will be normal and no abnormal noise inside. 2. Adjust the temperature controller to make sure the measuring parameters of the thermometer meet the actual environmental requirements.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Refrigeration Operation Control When the temperature reaches refrigeration control point, the air conditioner will run large cooling output. When the temperature in the kiosk cabinet is less than the refrigeration control point, the refrigeration stops running.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Dehumidifier Configuration Instructions ▶ Program Setting 1. After switching on the power, the device will start automatically, the display parameters will be normal and no abnormal noise inside. 2. Adjust the humidity parameter, the measurement parameter of hygrometer accords with the actual environment demand. 3.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; value is displayed in turn), long press "SET/ESC" key to display " " for more than 3 seconds and enter the address setting after 1 second.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Maintenance Guideline Introduction This In-lane Kiosk is a kind of self-payment terminal designed by LKS for the unmanned management of parking lot for car owners. Car owners can pay their bills by swiping credit CARDS, scanning barcodes, banknote and other payment methods.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Flame retardant silicone Flashlight Goggle Anti-static nylon gloves Keys for kiosk front and rear door Attention: During the maintenance inspection process for the in-lane kiosk, the main power switch must be disconnected.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Replace the 15inch LCD Display 1. Open the kiosk back door and turn off the main power switch. 2. Unplug the display power cord, DP signal cable and ground line on the drive board in the back side of display screen and remove the wiring and ground cable on the touch screen drive board. 4.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; 4. Place the removed 29inch LCD display flat on the operating platform, remove the screen cable and backlit power cord on the back of LCD display, and remove the M3 combination screw on both sides of the display with a cross screwdriver to remove the LCD panel (as shown in the figure below) ■ Replace 15 inch Capacitive Touch Screen 1.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Replace the Keypad 1. Unplug the USB connector of the keypad before disassembling. 2. Remove the 4 pieces M3 stainless steel flange nuts that hold the keypad with the hexagon socket (0.22inch) and then take out the keypad. 3.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Replace Ingenico IUC-285 Credit Card Reader 1. Unplug the USB port of the card reader before disassembling, untie the ribbon and tie up the serial port cable. 2. Use a cross screwdriver to loosen and remove the 4 M3 assembly screws that hold the credit card reader. The card reader can be removed from the front of the cabinet.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; ■ Replace the Camera 1. Unplug the USB port on the back of the camera. 2. Loosen and remove the 2 pieces M4 stainless steel flange nuts from the camera mounting bracket with the soft hexagon socket (0.28inch) and remove the camera and bracket together. (As shown below left picture) 3.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; 3. Loosen and remove the 4 M4 stainless steel flange nuts on the scanner mounting bracket with an inner hexagon soft sleeve (size 0.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; 2. Unplug the power supply cord of the air conditioner, the RJ45 communication network connector, and the control panel communication cable in turn. 3. Loosen and remove the 12 M4 stainless steel flange nuts that are used to fix the air conditioner mounting bracket with the hexagon socket (the specification is 0.28inch).
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Safety Precautions ▶ The metal kiosk cabinet and hardware components inside are well grounded; The grounding device shall not be removed or modified in any way. ▶ Do not touch or be close to any part of the electrical component inside the kiosk cabinet.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Equipment Common Problems and Failures ■Printer Paper Jam ▶ Turn off the printer power before maintenance, open the back door and pull the printer out. ▶ Push the blue handle of the printer to the inside of the printer, take out the stuck printed paper and tear off the wrinkles of the stuck paper.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Shenzhen Lean Kiosk Systems Co., Ltd Stock Code: 870885 Contact: Jesmine Zhu;Tel: +86-17796361726 ; E-mail: jesmine@lien.cn ; Website: www.lkskiosk.com / www.lien.cn; Whole Kiosk does not Work and Warranty Telephone ▶ Check whether there is electricity in the power supply outlet of kiosk locations.