Use Manual

ManualsBrandsShenzhen Koto Electronics ManualsElectronicsVideo Doorbell

Bracket(Matching)

Step 1: Remove the backplane.

Operate as the picture shown.

please remove the backplane.

Step 2:Install the mounting plate to the wall.

Use the mounting screws inside the kit.

Mount the bracket on the wall.

(Or use 3M glue on tempered glass or

stainless steel)

WARNINGS

Step 3:Installation of machine mounting bracket

Align and push down the clamps of the equipment

and fixing bracket, lock the anti-disassembly screw,

and complete the installation.

You can download the TuyaSmart app by searching for TuyaSmart in your app

store or by scanning the following QRcode.

2. Registration, login, and password reset

1. Open the Tuya Smart app and tap Sign Up. In the User Agreement and Privacy

Policy dialog box, carefully read the privacy policy and agreement and tap Agree to

go to the account registration page.

2. Enter your mobile phone number or email address and tap Get Verification

Code. The country or region on the registration page is the same as that you set in

the mobile phone. You can also manually change the country or region before

registration.

3. OntheEnter Verification Codepage,entertheverificationcode. OntheSet Password

page, set the password as perinstructions and tap Done.

Equipment Connection

5.Enter experience mode

4. On the Enter Verification Code page, enter the verification code.

5. On the page that appears, enter a new password and tap Done. Then the

password is reset, and you automatically log in to the app.

6. For security concerns, the app will detect risks in your phone system during

You can determine whether to exit the app or not. If no selection is made, the app

will automatically exit.

1. Open the TuyaSmart app and tap Trynow. Adialog box appears, indicating that

cloud storage, third-party voice control, and device sharing are not supported in the

experience mode.

2. Tap Continue. The Home page appears.

On the device list page, click the "Add Device" button in the center or click the "+"

button at the top right to enter the "Add Device" page, which is currently divided

into two methods: "Manually Add" and "Automatically Discover". (Use manual add

mode)

ADD DEVICE

1、In addition to the Wi-Fi quick connection (default mode) and hotspot network

configuration (compatible mode) that most devices have, some devices also have

a "wired network configuration mode" (currently the device only supports QR code

network configuration and WiFi fast even)

2. To use the QR code to configure the network, you need to set the indicator light

of the IPC device to a fast flashing state or hear the corresponding prompt tone.

3. The reset steps can be viewed by clicking the "Try to configure network step by

step" button.

4. After clicking Next, you will be taken to the page for entering the Wi-Fi password.

5. According to the prompts on the page, face the QR code directly to the camera

and keep a distance of 15-20cm until you hear a prompt sound from the camera.

6. If you hear the prompt tone, please click the "Hear the prompt tone" button below

to enter the page for adding devices.

7. If the network configuration fails, the following page will be displayed.

1. To use WiFi quick connection, you need to set the indicator light of the IPC

device to a fast flashing state or hear the corresponding prompt tone.

2. The reset steps can be viewed by clicking the "Try to configure network step by

step" button.

3. Click Next, and you will be taken to the page for entering the Wi-Fi password

4. Click Next to enter the add device interface

5. If the network configuration fails, the following interface will be displayed

6. You can choose to switch the network distribution mode and use the QR code to

configure the network

ADD DEVICE MANUALLY— QR CODE PAIRING

MODE

ADD DEVICE MANUALLY— WIFI FAST

CONNECTION

4.Reset password

If you forget yourlogin password, you can reset thepassword based on the

following process:

1. On the Log In page, tap ForgotPassword.

2. On the page that appears, check the country or region.

The systemautomat- ically identifies the current country or region where you reside.

You can also manually select a country or region. If your account is registered with

a mo- bile phone number, the country or region must be the same as the one you

selected during registration.

3. EnteryourregisteredmobilephonenumberoremailaddressandtapGet Ver- ification

Code.

3. Log in with your app account or a third-party account

1. OpentheTuyaSmartapp.IfyouhaveregisteredanaccountintheTuyaSmart app, tap

2. Check the country or region on the login page. The system automatically iden-

tifies your current country or region. You can also manually select a country or

region.

3. Enter your registered mobile phone number or email address, enter the pass-

word, and then tap LogIn.

4. If you have installed WeChat or Tencent QQ on your mobile phone and have a

WeChat or Tencent QQ account, tap the WeChat or Tencent QQ icon on the login

page. On the authorization page that appears, allow authorized login for your

WeChat or Tencent QQ account. If you use an iPhone, you can also log in with

your Apple ID.

1. The device is equipped with a rechargeable lithium battery. The

battery life will be affected by the device wake-uo times and the

number of wake-ups. Therefore, the PIR sensor alarm detection

function will be used when in an environment of a lot of people. It is

recommended to turn off or set the device to low sensitivity to reduce

device wake-up and call time then extend battery life. Please charge

the battery immediately when the battery is low.

2. Put the device in range of your router. Please make sure the

network is normal in the installation environment and check whether

the Wi-Fi is covered, especially installing outside the board/ door. If

the Wi-Fi signal is weak, you need to select the relay setting or

enhance the Wi-Fi relay improvement signal.

3. This device is a low-power intelligent product. It can support App

remote wake-up, PIR wake-up, doorbell wake-up, and will enter

sleep mode automatically for a short time after each wake-up. You

can set up the work time in the App settings.

4. In mainland China the App could't receive Google’s push

messages. You need to turn on the App’s self-starting function to

receive push messages.

5.This device provides free cloud storage and face recognition

services for one month. If you want to continue using these

value-added services after the free trial period, you need to purchase

in the App.

Summary of content (2 pages)

PAGE 1
3. Log in with your app account or a third-party account Equipment Connection Bracket(Matching) You can download the TuyaSmart app by searching for TuyaSmart in your app store or by scanning the following QRcode. 1. OpentheTuyaSmartapp.IfyouhaveregisteredanaccountintheTuyaSmart app, tap Log In. In the User Agreement and Privacy Policy dialog box, carefully read the privacy policy and agreement and tap Agree to go to the login page. 2. Check the country or region on the login page.
PAGE 2
Warning 6tatement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.