© 2010. All rights are reserved. No part of this document may be reproduced without permission. All trademarks and brand names mentioned in this publication are property of their respective owners. While all efforts have been made to ensure the accuracy of all contents in this manual, we assume no liability for errors or omissions or by statements of any kind in this manual, whether such errors are omissions or statements resulting from negligence, accidents, or any other cause.
SAFETY PRECAUTIONS Before using your phone, please read the following important information to eliminate or reduce any possibility of causing damage and personal injury. Do not use wireless phones while driving. Switch off wireless devices in aircraft. The signal may cause interference. Using them on aircraft is illegal. Do not use mobile phones where blasting is in progress. Follow any regulations and rules strictly. Do not use mobile phones at a refueling point.
Ensure the phone is turned on and in service. Enter the emergency number, then press Pick Up key. Give your location. Do not end the call until told to do so.
Table of Content GENERAL INFORMATION.................................................... 1 Antenna…………………………………………………………………...1 Network Service………………………………………………………….1 Accessories………………………………………………………………1 Privacy…………………………………………………………………….2 KNOW YOUR MOBILE PHONE ............................................ 3 Positions of Phone Keys………………………………………………..3 Functions of Keys………………………………………………………..4 Display Screen…………………………………………………………...
Services…………………………………………………………………14 Phone Book……………………………………………………………..29 Fun & Games…………………………………………………………...22 Call Center………………………………………………………………23 Messages Center………………………………………………………14 Multimedia………………………………………………………………29 Organizer……………………………………………………………… .43 Settings………………………………………………………………….36 User Profiles……………………………………………………………36 APPENDIX............................................................................
GENERAL INFORMATION Antenna Use of other antenna devices could damage your mobile phone and reduce performance. Your phone has a built-in antenna. Don’t touch the antenna area unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Network Service A lot of features described in this manual are called network service. They are special services provided by wireless service providers.
Privacy The shoot or recording of photos, images or sounds privately may be prohibited by law and/or subject to criminal prosecution. We recommend you to be responsible and respectful of privacy laws when you are taking photos, shooting videos, or doing records.
KNOW YOUR MOBILE PHONE Positions of Phone Keys 1. Earpiece 2. Screen 3. Left Soft key 4. Camera shortcut key 5. Pick up key 6. Right Soft key 7. TV shortcut key 8. Hang up and Power key 9. Number keys 10. Selection key 11. OK key 12. Speaker 13. Camera 14. Battery Cover 15. Speaker 16. Charger and accessories connector 17. Antenna 18.
Functions of Keys Key Name Description Making or answering a call. Pick Up In the standby mode, press this key to access the Key Call Logs. Use the left soft keys to execute to functions Left Soft indicated at the left of the prompt bar on the Key screen. TV In the standby mode, press it to access TV Shortcut function. key Camera In the standby mode, press it to access shortcut Camera function. key End an ongoing call. Press and hold this key to turn on or off the mobile phone.
Scrolling options in the function list or the phone book. In the edit mode, it is used for moving the cursor. Selection In the standby mode, press Selection Key to Key/OK activate a specified function; press OK to Key switch to menu. In the Camera mode, press the OK Key to take a photo. In the Video mode, press the OK key to start/pause record. Used to enter numbers, letters and some special characters.
Display Screen Your mobile phone has a single LCD display, which consists of three main areas: The First line displays status icons, which indicate the signal strength, the remaining power of the battery, etc. The Middle lines display text and graphics, including numbers, text, animated icons and the information you enter. The Last line displays the currently available operations assigned to the left or right soft key.
Sound Status Ring Vib. only Vib. and Ring Vib. then Ring Back Light You can set the Back Light for the display and keypad through options in the menu. The backlight will be off automatically without any key operation after a while.
GETTING STARTED First Call Insert a SIM card (Switch off your phone at first, and then remove the battery). Enter the area code and the phone number and press Pick Up Key. Tip: Before you get started, you must insert a valid SIM card in your phone and charge the battery first. SIM Card: Please refer to “Mounting the SIM Card” for more reference on installation. Charging the battery: please refer to “Charging the Battery” for more details.
the card. Keep all miniature SIM cards out of children’s reach. Note: Always make sure the phone is switched off before you insert or remove the SIM card, otherwise it may damage the SIM card. Mounting 1. Remove the battery cover by sliding it. 2. Insert the SIM card, with the notch at the lower right and the gold contacts face down, into the card slot. Align the card to the arrow sign as the following picture shows: 3. Replace the battery and close the cover tightly.
Mounting the Memory Card Please follow steps described as below: Insert the Memory card, with the gold contacts face down, into the card slot. Align the card to the arrow sign as the following picture shows: Charging the Battery Note: Please always keep your phone connector and charger dry. 1. Connect the connector of the travel adapter to the phone. 2. Plug the travel adapter into a proper AC wall outlet. 3.
minutes before the charging indicator appears on the screen. 2. You can turn on/off, and use the phone while charging. Warning: Make sure that the standard voltage/power of the place where you charge the battery matches with the rated voltage/power of our travel adapter. Switching Your Phone On/Off Press and hold Power Key for a few seconds to switch your phone on. If the phone ask for a phone lock code: Enter the phone lock code, and press OK.
CALLING Making Calls 1. Enter the phone number (with the area code) 2. Press Pick up Key to make a call. 3. Press Hang up Key to end a call. Making International Calls 1. Press the * key twice for the international prefix symbol +. 2. Enter the country code, area code and phone number. 3. Press Pick up Key to make a call. Making Extension Calls 1. Enter the host number, and press the * key three or four times for the extension prefix symbol P or W. 2.
1. In the standby mode, press Pick up Key to access the Call Logs. 2. Press the Up/Down key to reach the desired number or name and press Pick up Key. Adjusting the Sound Volume During a call, you can press the Up/Down Key to adjust the earpiece volume. Answering Calls 1. To answer an incoming call, press Pick up Key. 2. To end or reject an incoming/ongoing call, press Hang up Key. Tip: If the caller can be identified, the caller’s name and phone number will display.
GUIDE TO MENU OPERATIONS All function options about the mobile phone are listed as below with brief descriptions. Messages Center Short Message Service (SMS) is a kind of network service. Your home network may not support the service. Please consult your home network operator for more information. 1. Enter the Menu, and select Message Center. 2. Press the left soft key to enter the function. Write Message 1. Please press the # to switch input methods while editing a message.
2. Select Options, and then you can do: reply, delete, edit and so on. Drafts In the Drafts, please select Options, and then you can send, edit or select other operations. Outbox The screen will display the message list once you select the Outbox. 1. Select “OK” to read the current messages. 2. Select Options, and then you can send, edit or select other operations. MMS Please consult your network operator to obtain the MMS services.
MMS is unread. Use the Down/Up key to scroll the cursor to check the list, and the sender's name and number will display. If the MMS has been read, the icon will change to the read icon. Please press the left soft key to access Options, and then you can do: view, reply, delete and so on. Outbox In the Outbox, please select Options, and then you can send, edit or select other operations. Drafts In the Drafts, please select Options, and then you can send, edit or select other operations.
Report, and Delivery Report. 4> Filter: You can configure Anonymous and Advertisement. 5> Memory Status: You can check the Usage, Used space and Free space. Email This E-mail function can receive and send e-mails supported POP3, IMAP4 E-mail servers. Please read the following related information carefully before you use the function: E-mail: Please log on some Internet web to apply an e-mail account. That e-mail account is just the "E-mail" referred in your manual.
IMAP provides the user more capabilities for retaining e-mail on the server and for organizing it in folders on the server. IMAP can be thought of as a remote file server. Note: Please consult your network operator to check the type of your e-mail. User Name: The name you enter when you applied the e- mail account. When you log on the e-mail, the server should verify your identity. Password: The code you enter when you applied the e-mail account.
Priority: you can select Low, High or Medium. Content: enter the text and press “#” to switch input methods. When you select Done, you can do the following operations: − Send: to send the e-mail. − Send and Save: to save the e-mail to Sent and send it out. − Save to Drafts: to save the e-mail to Drafts without sending it out − Quit without saving: to exit the E-mail Option without saving the e-mail. Inbox means the All received e-mails display in the inbox, and the icon e-mail is unread.
Delete all folders Use the function to delete e-mails in Inbox, Outbox, Sent, Drafts respectively, or Delete all mailboxes drastically. Delete all marks Use the function to delete e-mails with the deleted mark in Inbox, Outbox, Sent, Drafts respectively, or Delete all mailboxes drastically. E-mail Accounts Please select one mode from them. After you edited the mode, please activate it to use the E-mail function.
Outgoing Server: 1> Outgoing Port: 25 2> Authentication: user define Incoming Server: 1> Incoming port: 110 2> Download Options: user define 3> Copy on Server: user define 4> Del server mail: user define Signature: You can set Auto Signature, Signature Image and Signature Text. Templates You mobile phone saves many template in common use. What you can do for those are Edit, Erase and Write E-mail.
Languages: Select the desired language to display the broadcast message. Note: Your network operator decides whether the language is supported or not. Channel Settings: You can choose Select, Add, Edit or Delete to receive the Broadcast information. Templates You mobile phone saves many messages in common use. You can Use, edit, or remove. SMS Settings You can set the default information about SMS properties.
STK This service is offered as the SIM card service provided by the network operator. Call Center Call History In the standby mode, press the left soft key to access Menu > Call Center > Call History. Call History All Calls: You can read all records of missed, dialed or received calls with this function. Press the left soft key to enter Options, you can View, Call, Send text message, Send multimedia message, and so on. Dialled Calls: With this function, you can check recent dialed calls.
2> − − − 3> − − ID. The default status is the Set by Network. Note: This function is related with your network. Select Hide ID may cause failure to dial. Please test the calling function is ok before you enable Hide ID. Call Waiting: Activate: The mobile phone will connect to the network when Call Wait is enabled. After a while, the network will take a response by sending messages to ensure your operation. If Call Wait is enabled, the network will warn you.
− Divert If No Answer: When this function is enabled, the coming call will be diverted to another phone number if there is no answer in some time. − Divert If Busy: When this function is enabled, the coming call will be diverted to another phone number if the phone number you dialed is busing. − Divert All Data Calls: You can divert all data calls with the need of your network operator's support. − Cancel All Divert: Use to cancel all diverting functions.
z All Calls: When this option is enabled, you can’t make any calls. z When Roaming: When this option is enabled, you can’t receive any incoming calls if you are out of reach of the network service. − Activate All: When this option is enabled, you cannot receive any incoming calls. − Cancel All: Cancel the call barring. It also needs the Call baring password provided by the network operator. − Change Barring Password: Use to modify the Call baring password.
end Auto Redial. . 3> Background sound: You can set the background sound when you are taking phone call as you need. Select when make call: You can set on and off. Playback setting: You can set the volume and the play mode of the background sounds. Effect list: There are ten kinds of effect sounds as default, and you can also add other effects as you need. 4> Call Time Display: You can set Call Time Display On or Off. The call time will display when set it on, .
Services STK Service This service is offered as the SIM card service provided by the network operator. WAP WAP enable you tour around the Internet world easily and pleasantly. Please follow the steps described as below: 1. Homepage: The default Internet Web Address. 2. Book Marks: Save the Web address you often use. 3. Recent Pages: Records after you browse the Website. 4. Offline Pages: You can view the offline pages which you have saved. 5.
Phone Book You can save many phone numbers in your mobile phone. The capacity of your SIM card decides how many phone numbers can be saved in. You can access the Phone Book to search all records saved in this mobile phone and your SIM card. Multimedia TV Draw out the antenna in the top left corner of the phone. If this function had been actives for the first time, it will prompt you to search channel. Press the Up/Down key to switch channel, press “*” & “#” key to adjust the volume.
on the picture’s size. You can press the Up/Down selection key to adjust the focus. Select Camera in Multimedia menu to activate the camera, press the OK key/the number key 0 to take a photo. Press the left soft key to access the following options: Photos: With this function, you can view, browse style, forward, rename, delete and do some other operations with these pictures. Camera Settings: You can configure the basic settings of camera such as shutter sound, EV, Contrast, banding and so on.
Video Recorder You can record videos of special moments with this function. Press the OK key to start record. Press the left soft key to access Options: CamCorder Settings: You can configure the basic settings of recorder such as EV, night mode, banding. Video settings: − Video Quality: You can select from the following Video Quality settings: Normal, Low or High. Higher Quality Videos takes up more space. White Balance: Adjust the color balance of the image.
− − − − − − Send: You can forward the video to multimedia, Email, and Bluetooth. Rename: You can rename the specified video. Delete: You can delete the specified video. Delete All Files: You can delete all videos. Sort by: You can sort all video files and display them in a new order; you can choose to Sort By Name, By Type, By Time, By Size and None. Storage: To set the default storage path. Photo Editor Photo Artist Use this menu to edit your photos using various editing tools.
x0.25, x0.5, x0.75, x1.5, x2. Image Tiles Access this option to select 2, 4 or 9 image tiles to display pictures, photos, or other images from your memory card. Audio Player The Play, Stop, Back, Forward functions correspond to the Up, Down, Left and Right Key respectively. The available music formats include: MP3, WAV, AMR, and so on. Select List to access the Play List, and then select Options to perform the following functions: play, details, add to rings, Refresh list, Settings.
APPEND feature. FM Radio You can use your phone to listen to FM radio stations once the original Headset is plugged into the accessories connector. Select FM Radio in the Multimedia to access the radio controls. 1. Press the Down key to Power on/ off the FM radio. 2. Press the OK key to record the FM. 3. Press the Left/ right key to step down/up to the next frequency. 4. Press the * key and the # key to adjust radio volume. 5.
Select the edited music, and press Options to perform the following operations: Play, edit, add rename and so on. Note: A maximum of 150 notes can be edited with a piece of self-edit tune. In the window of Tone Editing, press Options to perform the following operations: Play, adjust play speed and so on.
Memory card (Only for the card inserted) There are all of files saved in your memory card. You can do Open, Create Folder, Format and so on. With this function, you can perform the permissible operations as your desire. Slide Show With this function, you can enjoy your images comfortably. Choose one folder to play, and then the images will display on screen one by one. Settings In the standby mode, press the OK key to access Menu > Settings. User Profiles General 1. Activate 2.
− − Repeat: Rings continuously when a call is coming. Ascending: Rings continuously and the volume increases gradually. Extra Tone: − Warning: If necessary, you will be warned by the prompt tone. − Error: You will be warned by a tone if you make a mistake. − Camp On: A prompt tone will be heard after searching the network successfully. − Connect: A prompt tone will be heard after getting through to the dialed number.
indicates a call or a SMS/MMS is coming. Bluetooth You will enter into Bluetooth mode after you activate the Bluetooth function. This mode has no Activate option; the detailed operation has been shown in the “General”. Phone Setup Time and Date: You can set the home city, time / date and format. Schedule Power On / Off: You can set the time for auto power on /off. Do turn the status on before using that function, and then the time.
Auto update of date and time: It can be set to ON or OFF. UART setup: When using this phone as GPRS Modem. Misc. settings: LCD Backlight > According to various lighting conditions, you can select different brightness and its light time. Dazzle Ringtone: You like lot of songs and also like to set those all songs to be a ring tone of your mobile phone? For this you have to change ring tone every time with new song. TV9 gives you the facility of Dazzle/Shuffle Ringtones.
Select the Preferred Networks. The default network is the network where the SIM card belongs. Select Options to perform: add from list, create new, change priority and delete the current preferred network. 3. GPRS connection You can choose Always or When needed to select the GPRS connection.. Security Setup SIM Lock: It is asked to input the PIN. It can be configured if the PIN is correct. If SIM card is set on, it needs to input the PIN every time you power on.
required before the phone is switched off. Therefore, please switch the phone off and switch it on again after configuration, if you do not want others to change the status of the Fixed Dial. Barred dial: If this function is activated, the phone numbers in the barred dial list cannot be dialed. PIN2 is required for the function. Network support is also required Change Password: You can change PIN/ PIN2 password.
device. You shall ensure that the distance between two Bluetooth devices is not more than 10 meters (about 32 feet). However, the Bluetooth connection may be interfered by obstacles like wall or other electronic devices. In some circumstances, the application of Bluetooth may be restricted. Please consult your local authorities or service providers. Application of Bluetooth technology in your cell phone will accelerate the consumption of electricity power and thus shorten the service life of your battery.
− Service list: Press left soft key to Refresh HID profile, FTP profile, OPP profile, DUN profile, SPP profile function. Active Device: Show all devices already connected. Setting: After selecting, you have the following options: After select, you have the following options: Visibility, Change Device name, Authentication, Audio path, Block list, FTP settings, Bip setting. About: Show detail the Bluetooth serviced provided by this phone.
Add to access to add a new memo. Alarm The mobile phone provides 5 alarms and you can set them as your need. If you have configured an alarm, an icon indicated that you have configured the alarm will appear. No icon will show if you don’t set an alarm. Select “Edit” to set an alarm. Calculator The calculator can add, subtract, multiply and divide. To use the calculator: 1. Press the # key to enter the decimal point 2. Press the up, down, left and right key and OK key to select +, -, ×, ÷, = respectively.
the memory card. Flash Light You can turn On/ Off the flashlight function. In the standby mode, long press the number key “0” to activate/ deactivate Flash Light.
APPENDIX Appendix A: Guidance on Entry Methods This phone provides several input methods which can be used in editing the Phone Book, short messages, memos, greetings, alarms and other text applications. The Icons of Input Methods After entering different kinds of edit windows (including edit phonebook, short messages. etc.
How to Switch Between the Input Methods Press the # key to switch the input methods. e.g.: If the current input is Smart ABC the screen will show “eZi ABC”. Press the # key, to go to Smart abc, and the screen will show “eZi abc”. Numeric, Multitap ABC and Multitap abc Input Methods Numeric When the icon of the input method is “123”, press the number keys to enter the numbers directly.
Appendix B: Troubleshooting This section lists some problems that you might meet while using your phone. If you feel that your phone do not operate normally, please reset settings first, and then follow Troubleshooting Guide. If you are still unable to solve problems, please contact the authorized service center or the store from where you purchased the phone. Problems Solutions Make sure that the phone has been switched on. Make sure that the battery is charged.
No ring Check whether you have set up the” Vibrating Only” option. Check whether the ring volume is not too low Move away from a noisy place to check if you can hear the phone ringing. Check whether you have set up call diverts. LCD unclear Check whether the contrast has been set too low.
Appendix C: Available Accessories Dual Stereo Personal Hands Free Handset The Dual Stereo Personal Hands Free Handset allows you listen to music or to make conversations with hands free comfort. Mini USB Cable Connect the USB cable to the phone to save files and download pictures. When the USB cable is in use, the charging function will be activated. Drivers are not needed when you are using the USB cable with Windows 2000/XP.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types TV9 (FCC ID: UTSKKTV9) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.859W/kg and when properly worn on the body is 0.485W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.