Quick Start Guide B8502 Please Read Before Proceeding
Phone Components Front Panel Back Panel
Left, right panel Overhead view Bottom view
I. PHONE PACKING BOX The phone packing box should contain the follow -ing items and accessories: Phone, Battery, Power Adapter, Quick Start Guide, Wired Stereo Headset USB-Cable. II.INSTALLING SIM CARD, BATTERY AND MEMORY CARD Make sure to always turn off the power before installing or replacing the SIM card and battery. The back cover needs to be removed before putting in the SIM card, battery, or memory card. To remove the back cover 1. Make sure your device is turned off. 2.
1. Make sure the phone is turned off. 2. Insert the SIM Card into the SIM Card slot gold contacts facing down and cut-off corner facing out. Insert Battery 1. Align the battery’s exposed copper contacts with the battery connectors inside the battery compartment. 2. Insert the contact’s side of the battery first and then gently push the battery into place. 3. Close the back cover. Remove Battery 1. Make sure the phone is turned off. 2. Remove the back cover. 3.
Install Memory Card Insert the micro SD-card into the slot with its gold contacts facing down. Camera and photo gallery application can only be initiated after the installation of the TF card. Insert the TF card into the slot with its gold contacts facing down. Charging the Battery The battery is partially charged when shipped. Before you turn on and start using your phone, it is recommended that you fully charge the battery. Some batteries perform best after several full charge/ dis-charge cycles. 1.
2. Tap the check box for Wi-Fi to turn it on. Then your phone will detect available wireless networks. 3. Tap Wi-Fi, then detected Wi-Fi networks will be listed. 4. Tap the Wi-Fi network you want to connect to. If you selected a secured network, enter the security key to connect to network.
Start browser to surf the internet. The browser has been optimized for making your internet usage easy and enjoyable. NOTICE: You can only access the internet with either 3G, GPRS or Wi-Fi connection. Opening the Browser Tap > Then choose browser. Opening a webpage 1. Enter an URL in the browser window. 2. As you type, automatically possible addresses will be displayed. You can tap an address to go directly to that webpage or continue typing in the address line.
established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest standalone SAR value for your Bitel device model when tested for use at the ear/head is outlined as follows: Device Bitel B8502 SAR (W/kg) for 1 g 0.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
certified power level, the actual SAR level of the phone. While operating can be well below the maximum value, in general, the closer you are to a Wireless base station antenna, the lower the power output. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC.
· OS: Android 4.4 · Processor: 1.3GHz dual core MT6572 · Memory: 4GB ROM + 512MB RAM · Camera: Back camera 5 MPx Front camera 0.3 MPx · Battery Capacity: 1650mAh Li-ion Warning and usage for battery and charger Improper disposal may cause burns or explosion, do not attempt to dismantle or repair the battery, do not disassemble, crush, puncture, short circuit the battery or put into the water, fire or expose to high temperature over 60°C (140°F). Use specified charger only when recharging.
Input voltage: 100-240V, 50/60Hz, input current: 200 mA. Output voltage: 5VDC, output current: 1000mA Ways of storage Operation Temperature 0oC ~ 55 oC Operation Humidity 20% ~ 95% Storage Temperature -10 oC ~ 70 oC Storage Humidity 10% ~ 95% Use or storage of your Bitel device or Bitel device accessories outside of the recommended temperature ranges could cause damage to your Bitel device, Bitel device accessories, or lithium-ion battery.
Small parts may cause a choking hazard Do not dispose of it in a fire This device may produce a loud sound To prevent possible hearing damage, do not listen at high volume levels for long periods.
Fabricant Information SHENZHEN KONKA TELECOMMUNICATIONS TECHNOLOGY CO.,LTD Address: Overseas Chinese Town,NanshanDistrict,Shenzhen Tel: 0086-755-26608866 Website: www.konkamobile.