Media Recorder PT1190 External storage→DVD AV IN→External storage DVD →External storage Media Play Setting User manual
Safety Rules Warning Notices about AC Power Supply Adapter Make sure that the power supply socket is installed near the equipment and easy to be pushed and pulled. Be sure to use the AC power supply adapter and power line supplied. Do not use any other AC power supply adapter, or else the failures may result. Connect the AC power supply adapter to the power supply socket that is easy to be pushed and pulled. Do not touch the AC power supply adapter with wet hands.
s p a ce Whole-unit Power supply Power working temperatur e 5V 3A 15W 0-40℃ The warranty is valid only when the accessories supplied are used in the designated or suggested system environment as per the document, and it only applies to the Media Recorder . Our customer service and user supply apply only when these conditions for warranty are met.
Ⅷ.Parameter List Video copying Table of Contents Safety Rules……………………………………………………… … …2 Introduction……………………………………………………………5 I. External storage→DVD……………………………………………6 1. AV in onto DVD ROM ………………………………………6 2. USB onto DVD-ROM …………………………………………9 3. Memory Card onto DVD-ROM ……………………………12 II. AV IN→External storage ………………………………………14 1. AV in onto USB ……………………………………………14 2. AV in onto Memory Card …………………………………16 III.
Introduction Ⅶ.Troubleshooting Troubles Troubleshooting Method No power Check whether the DC interface is properly connected,and whether the AC end of the power supply adapter is in poor contact No display Make sure whether the standby button is pressed;if so, press the power supply button to recover it “No storage” tip appearing in recording Small AV IN recording volume 15 1 2 3 16 4 Check whether DVD disc is scratched; if so, replace it with a new one.
Note:File format of Burning CD is MP4 or MPG(MPEG2) ,MPG(MPEG2 Video code) can be played on ordinary DVD player, MP4 can be played on blu-ray DVD player. Recover all factory setups. Default setting Start Start: Connect (5V - 3.0A), and press the POWER button for 3 seconds. stand-by:when powering press Power button to turn off the screen,and press it again to turn on the screen. Resume default setting? S h u t Down Yes shut down:press the POWER button for 3 seconds to shut down the equipment.
External Storage DVD 5.6.4 Press ▽ or △, choose [Y E S ] , and then press ENTER. Select input.
Video Setup Recording Format MPG Rec Quality HQ Auto Stop Timer OFF Auto Chapter 5 minutes Erase disc HQ Recoring 00:00:03 Color System Stop (Note: if “no storage” appears on the display screen, please press RETURN to exit, and insert a correct disc. Wait 10-15 seconds to allow the unit to read the disc, and resume recording. Adjust the quality of resource to desire quality.) RETURN 5.6.3 Press or NTSC Menu Select ENTER , choose [YES], and then press ENTER. Setup 1.
Video 5.5 Auto chapter Auto Chapter Burning finished,please press return OFF 5 minutes HQ 10 minutes 15 minutes RETURN Cancel ENTER Burning RETURN Select Time interval of auto chapter creation on the CD. AV→DVD/AV→ USB/AV→CARD applies to the operation. 5.5.1 No chapter inserted into OFF. 5.5.2 5min Insert chapters at time intervals of 5min. 5.5.3 10min Insert chapters at time intervals of 10min. 5.5.4 15min Insert chapters at time intervals of 15min. 5.6 Disc erase 5.6.
External Storage DVD Setup Recording Format Select input. MPG Rec Quality HQ AV in Auto Stop Timer USB Auto Chapter Memory Card OFF 5 minutes Erase disc Color System ENTER Select RETURN 2.3 Select input “USB”, and the tips appear: “Copy files from USB to DVD”“Press REC to start recording” . USB Copy NTSC Menu ENTER Select 5.4 Auto stop time Preset time of auto recording stop for high quality recording. Auto stop time can be applied to AV-DVD/AV-USB/AV-CARD.
V. Setting Menu USB 5.1 Change disc settings on the setting menu Start the unit, and MENU appears. Choose Setup by moving up or down, and then press ENTER. Choose the item to be confirmed or changed by moving up or down, and then press ENTER. Burn files Burning Menu External Storage DVD AV in External Storage DVD External Storage 92% RETURN 2.5 Media Player Setup ENTER Select REC The message “Burning finished , please press return” appears, and the CD is ejected automatically.
/mnt/extsd USB Copy LOST.DIR o itemsl-drw Copy files from USB TO DVD Maria Mena-Just hold me.mp3 4.04Mb l-rw not enough space in DVD Maria Medlock_-_M..mp3 Press 5.52Mb l-rw to start recording MP_ROOT 1 itemsl-drw RETURN Menu REC 3.Memo r y C a r d o nto n to DVD-ROM 3.1 Read the disc correctly, and insert CARD. Enter the main menu, and choose “External Storage → DVD” by using the keyboard.
SD Copy External Storage Select input. Copy all files from Burning finished,please press DVD-ROM to the storage. return Press DVD AV in USB to start recording Memory Card RETURN Menu REC ENTER (Not: before the operation, make sure that USB storage capacity is bigger than DVD. The name of the path created on USB is DVD.) IV.Med i a P l a y 1. M e d i a P l a y 3.
SD SD Burn files Copy Copy all files from DVD-ROM to the storage. Burning Press 78% to start recording 78/100 RETURN RETURN Menu REC 3.5 The message“Burning finished, please press return ” appears, the Disc will be ejected automatically when the Burning is finished. Press RETURN to exit the current menu, return t o main menu by repeatedly pressing the RETURN button. Menu REC 2.4 Press “REC”, and “copy files to new directory” and the recording progress bar are shown.
Menu External Storage Menu DVD External Storage DVD AV in External Storage AV in External Storage DVD External Storage DVD External Storage Media Player Media Player Setup Setup ENTER Select 2.2 Select output: “ Memory Card”, and press ENTER. DVD External Storage Select output. USB ENTER Select 1.2 Select output “USB”. The screen shows the menu of AV synchronization, and the relevant message menu appears: “Video→USB”, “recording quality” and “remaining”. Press RETURN to go back to MENU.
Video USB USB copy files to new directory… 3% HQ Stop 1.4 3/100 Recording 00:00:04 Press STOP to end operation. The message “Burning finished”,Press RETURN to exit the current menu, return to main menu by repeatedly pressing the RETURN button. Video Menu RETURN REC 1.5 The message “Burning finished , Press RETURN to exit the current menu, return to main menu by repeatedly pressing the RETURN button.
DVD External Storage Menu External Storage Select output. DVD AV in External Storage DVD External Storage USB Memory Card Media Player Setup ENTER Select ENTER 1.3 The interface shows “CD→USB”“copy all files from DVD- ROM to the storage” and “Press REC to start recording”. Press RETURN to exit the current menu, and press REC to start recording. USB Copy Select 2.2 Select output:“Memory Card ”, and press ENTER. AV in External Storage Select output.
Video CARD Video CARD Burning finished,please press return HQ Remaining 01:38:23 RETURN Menu REC Remaining 00:00:04 RETURN Menu REC (Note : the name of the path of the program recorded created on the card is “ MT-ROOT/ Record ”. The remaining time is detected, and the burning is started automatically.) 2.4 Press REC to start recording. Video HQ CARD III. DVD →External s t o r a g e 1. DVD onto USB 1.
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
