MID User manual KC109-05 -1-
Contents MID.............................................................................................................................................. - 1 Contents ....................................................................................................................................... - 2 1 Introduction ................................................................................................................................1 1.1 Acknowledgements.......................................
8.3 Storage ...........................................................................................................................36 8.4 Date and Time................................................................................................................37 8.5 Language and Input Method ..........................................................................................37 8.6 About Tablet PC ...................................................................................................
1 Introduction 1.1 Acknowledgements Many thanks for you choosing this product. The product belongs to MID(Mobile Internet Device), which is a kind of mobile internet device, delicate, small and exquisite, and also portable. It is also equipped with a piece of touch LCD of high definition, which can be used to watch videos and pictures of high definition. It supports installation of multiple application programs on office and entertainment.
1.3 Safety Notice Before using MID, please read information in this section, and make your children learn about the information. About more detailed information, please refer to safety instructions and matters needing attention. z Please don’t use MID when you are driving, for fear of hindering safe driving. z In medical places, please observe relevant stipulations and regulations. And in regions near the medical devices, please shut down MID.
1.4 Abbreviation/term Abbreviation/term MID Full name Explanations Mobile Internet Device Mobile internet terminal Wireless Local Area Network WIFI Wireless Fidelity based on IEEE 802.
2 Brief introduction for MID product 2.
underside view: Speaker Rear camera Figure 2-3 2.
2.3 Use and preparation of MID Battery charging Before using MID for the first time, the battery must be charged firstly. Use power adaptor to charge MID. In order to guarantee full battery, please charge for 8 hours. Not more than 12 hours 2.4 MID state and notice Iconograph for notification When a prompt message shows on your notice panel, please click the column box and slide on the screen with your finger to open the notice list. Click options needing to check to see detailed information.
Airplane mode Charging GPS positioning Notice panel Notice iconograph will show when receiving new message, setting the alarm clock and hodometer as well as inserting SD card, you can open the notice panel to check detailed information Unlock notice panel When new notice iconograph shows on the notice column, please press the notice column with your finger, then slide downwards to unlock the notice panel.Quick start 2.
Turning off 1. After pressing the power key for a long time, the shutdown option will pop up. 2. Click OK. 2.7 Unlocking and closing of the screen The machine will close automatically when the screen is left unused 1.After the screen being left unused for a period of time, the machine will close screen automatically, so as to save battery power. 2.Under screen on state, press the power key, the screen will close immediately.
MID. Click to select When you want to use screen keyboard entry, and you want to select items on the homepage interface such as application program, you only use your finger to click. Press on If you want to unlock the available option of a certain item (such as textbox or interlinkage in the webpage), or move shortcut on the homepage interface and menu of main program, only press the item.
Application program menu button Search bar Application program Wallpaper Notice bar Figure 3-2 Connection state Skill: in any application programs, you can press homepage key to return homepage interface. Outstretched homepage interface Homepage interface may extend beyond the width of screen, so as to provide more space, so that you can place the newly increased shortcut, widget, etc.
Custom homepage interface Change desktop wallpaper 1. Press blank region on the homepage interface to pop up the menu. 2. When the menu popping up, choose source of homepage interface wallpaper you want to change. 3. After clicking source of wallpaper, click picture you want, and then select “setting wallpaper”. Figure 3-4 Add widgets 1. Please click application program menu. As shown in Figure 3-5. 2. After entering application program menu, click “WIDGETS” button on the top left of interface.
put the selected widget to the wanted place, then loose. Widgets Figure 3-5 2.10Access to application program How to visit application program of MID: 1. Please click application program menu. As shown in Figure 3-5. 2. Select the application program you want to visit. 3. If you want to exit the program interface, press the return key to the last interface, or press the homepage key to return homepage interface directly.
Widget Application program Figure 3-6 2.11USB connection Storage setting of MID Before transmitting document, you must set storage mode for your MID firstly: 1. Connect MID with computer by using USB transmission line. Notice bar will show the notice prompt. 2. Click status bar, options of status bar show. 3. Among options of status, click to choose USB connected, then click to open USB storage device. 4. At this time, USB has already been connected.
Copy the document to storage card 1. Connect MID and computer together with USB cable. 2. After setting according to storage of MID, connect with computer successfully. 3. Open your computer, in my computer, examine content in “removable disk (x)”. 4. Find the document you want to copy, copy it to “removable disk(x)”. 5. After completion of copying, click “safely remove hardware” in taskbar of your computer to unload. Content of MID storage device 1.
2. Click Storage. 3. Click Unmount SD card. 4. The system prompts that the SD card is safely removed. 2.13Character input Use screen keyboard When you start the program or select text edit box needing to input characters or numbers, screen keyboard will show. The following input methods are provided for the keyboard to select. 1. Android keyboard 2.
⑤ ① ④ ② ⑥ ③ Figure 3-8 1 Switch input capital and small letters 2 Switch character input mode and symbol/figure input mode 3 Click to insert space 4 Click to execute carriage return 5 Click and press on to delete characters on the left of the cursor 6 Click here to switch input method 2.14Application Technique Open the application procedure that is employed recently.
Application procedure used recently Figure 3-9 Add the small tool on the desk On the application procedure menu, click “WIDGETS”button and enter into the interface of small parts, the icon and name for added small parts can appear on this interface, such as: music, photo frame, clock and searching.
Rapid Screenshot When you are located on such any interface as Game or Movies and intend to serve the wonderful picture as the commemoration, the desired pictures can be reserved only by pressing Volume Down key and Power key simultaneously. Speedily Set Such Functions as Fly Mode Click the status bar on the lower right corner of interface, pop up two windows, there are some prompt messages for your equipment on the windows below.
Click here and select WIFI network Advanced Wifi setting option Figure 4-1 3.2 3G Connection (CONNECT A USB DONGLE) 1. Under the shutdown status, insert corresponding SIM card; 2. Start the machine and enter into the main interface to click and select Menu Key; 3. Click and select Setting; 4. Click and select 3G option, open 3G switch, within 45 seconds, observe that the SIM signal icon on the notice board is on. 5.
In 3G network connection Figure 4-2 Icon of 3G network signal 4 Communication 4.1 E-mail Setting for E-mail The E-mail application procedure is attached with the setting guide for E-mail, the external POP3 or IMAP E-mail account for common Web E-mail service provider ( such as: Yahoo, Gmail, Hotmail and163 manufacturers) can be added.
Figure 5-1 Setting guide for E-mail 1. After clicking and selecting the E-mail icon, the produced E-mail setting guide will help you perform the setting; 2. Click and select Next button; 3. Input E-mail address and password of your E-mail account; 4. Click and select Next button to select that your E-mail type either is POP3 or IMAP. 5. Click and select Next button again to inspect whether the send-receive server of E-mail is available. 6.
phone. 1. Click and select the E-mail; 2. Enter into your inbox; 3. Click the menu key; 4. Click and select the Account; 5. Press the account that you want to delete. 6. Pop up the menu list; click and select the Deleted Account. 7. Click OK to remove it. Send E-mail information 1. Click and select the E-mail to show your inbox. 2. Click inbox to enter, automatically refresh the new e-mail, click and read it. 3. Press down the menu key and pop up the menu. 4.
OGG MIDI WAV Video Play Format AVI(H.264、DivX、XviD) RM/RMVB MKV WMV MP4 VOB FLV 3GP 5.2 Music Your music can be divided into such 4 types as Artist, Special Edition, Songs, Play List and Playing. select a classification to view the contents in the list therein. If enter into one classification, always perform the selection until appear the songs that you want to play.
The cycle has been opened Replay all songs Check current play list Cover of special edition Artist Special edition Music Remaining time Played time Play progress bar Figure 6-1 Visit and play the music 1. Click and select the music; 2. Click and select the songs, click and select the Artist, Special Edition and Song List. 3. Select one of songs for play. Add the songs onto the new play list 1. Click and select the music; 2. Click and select the songs, 3.
2. Click and select the songs, 3. Press the songs that you will add onto the play list ; 4. Pop up the music setting menu, click and select Delete. 5.3 Camera Camera functions 1. Click and select the camera; 2. The system enters into the camera interface; 3. Click and select the Photo button and easily take the photos; 4. Set such functions as photo size, storage location, white balance and focal length regulating; 5.
Figure 6-3 5.4 HDMI HDMI High-definition video interface The MID and the high-definition television are connected by a standard HDMI cable. This interface supports the picture with highest quality of 1080p resolution ratio. 1. 2. MID is in the boot status. The MID and the high-definition television are connected by a standard HDMI cable. 3. The system interface on MID is automatically synchronized with the high-definition TV screen. 5.
4. Double-click the picture to zoom in or zoom out the picture. Tips: the picture browser is capable of automatic rotation. When the MID is rotated, the picture will automatically adjust along with the rotation direction. Fig. 6-4 Edit and set the picture When view the pictures in full screen mode, press the Menu key to show the menu options, through which the pictures are edited and set.
5. Click Return to go back to the picture browse. Video preview and playback The Media Browser will scan all video files in the MID and TF card, and preview the playable ones. Click one to play the video files. In the video preview interface, press the Menu key, and the function window of editing video files appears, as in Fig. 6-5 Fig. 6-5 6 Internet 6.1 Browser Enter Homepage The browser always opens the last web page that the user has visited, and the home page will appear after clicking the browser.
2. Press the Main menu button to pop up browser setting menu. 3. Click Settings. 4. Click Set Home page. 5. Enter URL and Click OK. Address bar Fig. 7-1 Visit web page 1. Click Browser. 2. Enter your URL in the address bar. 3. Click Start on the soft keyboard.
Click here to add a web page as bookmark Click here to edit your browser Input the contents that you want to search Fig. 7-2 Click here to enter the Manage bookmarks Browse the webpage When the page finishes loading, you can slide your finger to browse and view other parts of the page. Zoom in or zoom out webpages The webpage can be zoomed in or out by double-clicking the screen or by dragging through two fingers. Find texts within the webpage 1.
2. z z Click the icon ‘Click here to add a web page as bookmark’ in Fig. 7-2, and a Bookmark this page window pops up, click OK to set the page you want as the bookmark. Open bookmark 1. Enter the interface similar to Fig. 7-3 by clicking the icon ‘Click here to enter the Manage bookmarks’ as in fig. 7-2 in the browser interface. 2. Click the bookmark that you want to open the web page. Edit bookmark 1. Enter the interface similar to Fig. 7-3 just like opening the bookmark in the browser interface.
7 Other Applications 7.1 Alarm clock 1. Click clock icon in the main interface. 2. Enter program interface. (Fig. 8-2) 3. Click the time periods need to set, and the alarm setup menu pops up. 4. After setup, click Done on the corresponding clock. Fig. 8-2 7.2 Calculator 1. Click Calculator. 2. Enter the basic panel of the calculator to operate. (Fig.
Fig. 8-3 7.3 File Management Browse files Slide the desktop to locate the File browser. You can use the file browser to manage, edit and delete the files and folders, or to create sharing and FTP server to achieve resource sharing.
Fig. 8-4 Cut and copy files 1. In the file browser, press Select and then select the file you want to operate. Please note ,if you just need open the file , you do not need press Select . 2. Pop up Edit, including Cut, Copy, Paste,Delete, Rename, Share. 3. Click Cut or Copy file or folder. 4. Click into the folder you want to paste, and pop up menu by pressing the Menu key. 5. Click Operate and then click Paste. Delete files 1. In the file browser, press the file you want to delete. 2.
1. Click the application icon to enter the settings application on the Homepage. 2. Click Sound. 3. Click Volume to control the volume of the ringtones, media, alarm clock and notification. 4. Pop up volume setup panel, and control it by dragging the progress bar to left or to right. Touch sounds and Screen lock sound You can set the MID to emit sound when you use the soft keyboard or touch screen as well as lock the screen. 1.
2. Click Security. 3. Click Set screen lock. 4. Click Pattern. 5. Pop up unlock pattern panel with 9 contacts, at least four of which are connected vertically, horizontally or diagonally. Put fingers away from the screen upon completion and the system will record the pattern you set. 6. Click Continue. 7. Draw the screen unlock pattern again when the prompt appears and click OK.
card. 1. Click the application icon to enter the settings application on the Homepage. 2. Click Storage. 3. Click Unmount SD card. 4. The system prompts that the SD card is safely removed. 8.4 Date and Time Adjust the date, time and time zone 1. Click the application icon to enter the settings application on the Homepage. 2. Scroll down the screen and then click the Date and time settings. 3. Click Select time zone to select the one you want. Scroll down the list to see more time zones. 4.
8.6 About Tablet PC View MID status 1. Click the application icon to enter the settings application on the Homepage. 2. Click About Tablet PC. 3. Click Status Message to view the Battery status, Network status, Bluetooth address, Serial number and Running time, etc. System Update 1. Click the application icon to enter the settings application on the Homepage. 2. Click About Tablet PC. 3. Click System Update. 4. If the window shows this is the latest version, there is no need to update. 5.
4. Operate after completion in accordance with the installation guide. Method 2: You can download and install your favorite third-party software according to the Method 1, and after that, you can install the software you want through this software. Note: search files with the suffix of .apk for the third-party programs from the Internet 9.2 Management and Uninstall Management applications You can enter the applications and select one to Forcibly stop, Clear data, Uninstall, and Remove storage location.
10 System Upgrade 10.1System Upgrade Preparation Download upgrade program You can download the software upgrade package from websites, which is used to upgrade the system version of the MID. System Upgrade Preparation: 1. Download the system upgrade package from relevant websites to your computer. 2. Prepare the system upgrade tool: a TF card with storage capacity ≥512MB. 10.
3. MID POWER OFF, Insert a upgrade program TF card Press volume down buttons don't move, and then press the POWER button startup, loosen the POWER button, then loosen the volume minus buttons 4. 40 seconds of robots icon 5. Wait for the system upgrade completion and automatic restart Fig.11-1 Troubleshooting 11 1. slow initial boot for MID After system upgrade of MID, initial boot needs installation of the pre-installed software applications, and for about 2-3 minutes, it runs faster. 2. 3.
Installation of some third-party applications may lead to system failure, and you can press the reset button (next to the power port) to reset the system. 5. Unable to create e-mail or re gist applications z Ensure your network is properly connected to the Internet. z Ensure the e-mail is set up correctly. z Ensure your system time and the local time are consistent.
43