User Manual

ManualsBrandsShenzhen Kirisun Communications ManualsElectronicsTwo-way Radio

Instruction Manual

PT5200

FM Portable Radio

We are very grateful for your purchasing

two-way radios produced by Kirisun

Electronics (Shenzhen) Co., Ltd.

two-way radio always incorporates the latest technology. The quality and function of

the

two-way radio can meet your demands for reliable communication.

Notice to the User:

· Please read this instruction manual before operating this radio.

· It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere

(where the air contains gas, dust and smog, etc.), such as while taking on fuel, or while

parking at a gasoline service station; or any area where radio communication is prohibited

(such as a hospital or a airport.)

· It’s prohibited to operate the radio without permission at the areas where the government laws

prohibit radio communication.

· Please don't expose the radio to direct sunlight for a long time; don't place the radio near any

heating devices, either.

· Please don't put the radio in extremely dusty, moist or dabbling places; don’t place it on any

unstable surfaces, either.

· If you want to develop or remodify the radio

· Refer service to the well-trained professional technicians only and do not disassemble or

assemble the radio.

Kirisun Electronics (Shenzhen) Co., Ltd

Summary of content (17 pages)

PAGE 1
Instruction Manual PT5200 FM Portable Radio We are very grateful for your purchasing Electronics (Shenzhen) Co., Ltd. the two-way radios produced by Kirisun two-way radio always incorporates the latest technology. The quality and function of two-way radio can meet your demands for reliable communication. Notice to the User: · Please read this instruction manual before operating this radio.
PAGE 2
FCC Warning: PT5200-01 is a occupational equipment. And it operate with a duty factor not exceeding 50%. PT5200-01 cannot worn on the body. The working frequency of the two-way radio (USA Version) must compliance with the requirement of subpart C of Part 90.
PAGE 3
CONTENTS Unpacking and Checking the Equipment --------------------------Supplied Accessories ---------------------------------------------■ Preparation -------------------------------------------------------Charging the Battery Installing/Removing the Battery Pack Installing the Antenna Installing the Optional Speaker/Microphone Installing/Removing the Belt Clip ■ Radio Overview ■ Basic Operations ■ Programmable Button Function ■ Wired Cloning Mode ■ Auxiliary Functions TOT (Time-out Timer) Battery Save Low
PAGE 4
Item Quantity Antenna 1 Hand Strap 1 Li-Polymer Battery 1 Charger 1 Power Adapter 1 Dust Cover 1 Instruction Manual 1 天线 Antenna 电源适配器 Power Adapter 充电座 Charger 对讲机吊带 Hand Strap 锂电池 Li-Polymer Battery ■ Preparation Charging the Battery 对电池充电 Plug the power adapter into the proper AC wall outlet; and insert the cable of the power adapter into the adapter socket on the charger; then the charger indicator lights yellow. Insert the battery or the radio to be charged into the charger slot.
PAGE 5
* The built-in protection circuit in the battery will cut off power when power appears low. If you charge it in the charger then, the red indicator won’t light immediately. About 1~5 minutes later, the charger indicator will become normal. Installing/Removing the Battery Pack 安装/取下电池 Installing the Battery Pack Match the 2 bulges of the battery pack with the corresponding slots at the rear bottom of the radio.
PAGE 6
⑥ Side Button 2 (Programmable Button) ⑦ Top Button (Programmable Button) ■ Basic Operations Switch On the Radio: 开机 Switch on the radio by turning the Power/Volume switch clockwise till a click is heard, then the radio will be in the state of stand by and you will hear a beep if the dealer has set it. If channel annunciation has been set, the current channel number will be announced. Adjust Volume: 调节音量 Rotate the Power/Volume switch to adjust the volume with the monitor key pressed.
PAGE 7
Temporarily Cancel Noise Channel Cancel Noise Channel Check Squelch Level Adjustable Squelch Scan Scrambler Scrambler Backup Cancel Squelch Instantaneously Cancel Squelch Talk Around Power Check Whisper VOX Battery Power Indication Temporary Activation of Channel Annunciation Activation of Channel Annunciation Reverse Frequency The dealer can program the following functions: Null No Function is programmed. CALL 1/CALL 2 Press the side button set as “Call 1” or “Call 2” to transmit the stored coding.
PAGE 8
Instantaneously Monitor Press the side button set as “Instantaneously Monitor” to turn off QT, DQT, 2-Tone and 5-Tone and release it to return to normal work. Temporarily Cancel Noise Channel When the radio pauses on a certain channel during scanning, press the button set as “Instantaneously Cancel Noise Channel” to delete this channel from the scanning list temporarily.
PAGE 9
transmit from the currently working channel 5) Last called When pressing PTT button, the radio will transmit from the last channel that received a call. 6) Last used When pressing PTT button during the scanning, the radio will transmit from the last channel you used to talk.
PAGE 10
Whisper After you press the button set as “Whisper”, your counterpart can hear louder voice even you speak in a very low voice; press it again to exit. VOX (Voice-operated transmission) Press the button set as “VOX” to enter the voice operated mode and you can talk with your counterpart without pressing the PTT button. Battery Power Indication When you press the button set as “Battery Power Indication”, indication tone “1”, “2” , “3” or “4” sounds to indicate the current battery power.
PAGE 11
the Activation/Prohibition of Wired Cloning Mode. However, the wired cloning setting on the host radio won’t be changed. After pressing the PTT button, if the green indicator flashes twice and one beep sounds, it indicates the sub radio is in the state of Activation of Wired Cloning; if the red indicator flashes twice and two beeps sound, it indicates the radio is in the state of Prohibition of Wired Cloning.
PAGE 12
Battery save function can decrease the battery power consumption. Low Power Warning Low power warning tone sounds and LED flashes red when the battery power goes below the preset value and you need to recharge the battery. In low battery status transmission is prohibited. Channel Annunciation The dealer can activate or prohibit this function. Two types of Chinese and English annunciation are available. When switching to a channel by rotating the channel knob, the current channel number will sound.
PAGE 13
SP Un-mute The dealer can the conditions to activate the speaker. There are 6 options: 1) Carrier wave: The speaker will be activated when carrier wave is detected. 2) Carrier wave + selective signaling: The speaker will be activated when carrier wave is detected and the selective signalings are identical. 3) Carrier wave or selective signaling: The speaker will be activated when carrier wave is detected or the selective signalings are identical.
PAGE 14
Transmitting Beginning/Ending Signaling Transmitting Beginning/Ending signaling is used to join in or disconnect from some repeater and calling system. 2) Transmitting Beginning signaling is used to join in the conventional repeater and its relevant auxiliary equipments. If the ID being transmitted matches with the repeater’s ID, it can use the repeater and its auxiliary equipments. 3) Transmitting Ending signaling is used to disconnect with the conventional repeater and its relevant auxiliary equipments.
PAGE 15
■ Major Specifications PT5200 Frequency Range USA : 150-174 (MHz) EURO:146-156MHz 157.45-160.6MHz 160.975-161.475MHz 162.05-174MHz RF Power 3.5W (H) / 2W(M) / 0.5W (L) Spurious and Harmonics ≤-70 dB Frequency Stability ±2.5ppm Max Antenna Gain 1.4dBi Maximum Frequency deviation ±5kHz (W)/ ±3.5kHz (M)/ ±2.2 kHz (N) Receiver Sensitivity ≤0.
PAGE 16
■ Settings (by the Dealer) Model: ____________ Serial No.
PAGE 17
Call 2 □ Call 2 Cancel Alarm □ Cancel Alarm □ Individual Working □ Individual Working □ Monitor □ Monitor □ Instantaneously Monitor □ Instantaneously Monitor □ Temporarily Cancel Noise Channel □ Temporarily Cancel Noise Channel □ Cancel Noise Channel □ Cancel Noise Channel □ Check Squelch Level □ Check Squelch Level □ Adjustable Squelch □ Adjustable Squelch □ Scan □ Scan □ Scrambler □ Scrambler □ Scrambler Backup □ Scrambler Backup □ Cancel Squelch □ Cancel Squelch □ Instantaneously Cancel Squelch □ Instant