DP770 Instruction Manual 1/27 Instruction Manual DP770 We are very grateful for your purchasing brand two-way radios produced by Kirisun Communications Co., Ltd. We believe two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of two-way radio can meet your demands for reliable communication.
DP770 Instruction Manual 2/27 Safety Before using this radio, read this operating instruction carefully for safe and convenient usage. This product can only be maintained by the professional technicians. Do not disassemble the radio by yourself. To avoid of the problems caused by electromagnetic interference or electromagnetic compatibility, turn off the radio in any facilities where posted notices instruct you to do so, such as hospital and other health care facilities.
DP770 Instruction Manual 3/27 To realize the best performance of the battery, change the battery once a year. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
DP770 Instruction Manual 4/27 Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée equivalente (p.i.r.e.
DP770 Instruction Manual 5/27 Unpacking and Checking Unpack the radio carefully. We recommend that you check the radio and the supplied accessories listed in the following table before discarding the packing material. If any damage or loss has occurred during shipment, please contact the deliveryman or the dealer without delay.
DP770 Instruction Manual 6/27 Keep the battery in this state for 1~2 hours, and then get it off from the charger. The battery arrives to its best performance. And then plug off the AC adapter from the socket. Note: z The radio battery is not charged before shipment. Please charge it before the initial use. z KB-35L Li-on battery of Kirisun is applicable to this radio.
DP770 Instruction Manual 7/27 Note: Do not short-circuit the battery terminals or dispose the battery in fire. Do not disassemble the battery casing by yourself. 3) Installing the antenna Hold the base of the antenna and turn the antenna clockwise into the connector on the top of the radio until secure. 4) Installing the external speaker/microphone Match the external speaker/Microphone with the connector on the side of the radio, and fasten the screw.
DP770 Instruction Manual 8/27 5) Installing the belt clip Match two holes on the belt clip with the holes on the back of the radio, and fasten them with the screwdriver. Getting Started A. Antenna B. Volume/Channel Knob Short press the key, the function of the knob switches from adjusting the volume to changing the channel. Rotate the knob to adjust the volume or change the channel.
DP770 Instruction Manual 9/27 rotate counterclockwise to decrease. C. LCD Screen 160*128, 65K colors, 1.77TFT D. Universal Connector Connect USB programming cable, earphone and etc. E. Top Key Programmable, default: short press to enable emergency alarm, long press to exit emergency alarm. F. LED Indicator RED—transmitting, GREEN—receiving, Flash RED—low battery when transmitting. G. Side Key 1 Programmable, default: none. H.
DP770 Instruction Manual 10/27 1) Powering on Long press the ON/OFF key to turn on the radio. Then the LCD displays Kirisun Logo. The backlight turns on automatically and a beep sound is heard. In the power on state, long press the ON/OFF key until Powering off screen exists, and then the radio is turn off. 2) Adjust the volume/channel The default setting of the knob is to adjust the volume. Short press the key, the knob function switches from adjusting the volume to changing the channel.
DP770 Instruction Manual 11/27 Short press—press the key and release it soon. Long press—press and hold the key for several minutes (depending on the setting in CPS, usually within 0.5S~5.0S). Hold—always press and hold the key.
DP770 Instruction Manual 12/27 Radio Check Check if the target radio is active or not Radio Kill Kill one target radio Radio Enable Activate one killed radio Remote Monitor Turn on the speaker of the target radio to start transmitting without any prompt. Vibrate Enable/disable vibrate 4) Functions overview You can check the radio’s functions through any of the following operations: 1. Short/long press the relevant programmable keys: 2.
DP770 Instruction Manual 7 P Q R 8 T U V 9 W X Y 0 Blank * Input punctuation: ',', '.', '/', '\\', '?', '!', ':', ';', '\'', '"', '~', '@', '*', '#', '%', 13/27 S Z '(', ')', '[', ']', '{', '}', '<', '>' 6) PTT key There are two functions for the PTT key: (1) During the call, press the PTT key to call the other members joined in this call. Press down the key and talk to send the call; release it to receive the call. (2) Press the PTT key to make a new call.
DP770 Instruction Manual 14/27 Talk-around mode GPS is receiving the data. GPS enabled, but no data is received. If the icon is going round, it means the radio is scanning. The scan stops at the ordinary channel. The scan stops at the priority channel. Low battery warning, the icon flashes. Indicates the residual battery capacity. Private call Group call All call This item is selected. This item is not selected. 9) LED indicator RED LED flashes: receive emergency alarm call.
DP770 Instruction Manual d) Press or rotate the knob to the target zone, and press 15/27 to select; e) The dialog box pops up and the setting is done. Then the radio returns to the previous menu. 2) Selecting a channel and contact After the target zone is selected, rotate the knob to select the channel and the contact ID or group ID. LCD display screen will indicate the selected zone, channel alias and channel number.
DP770 Instruction Manual 16/27 d. Press the PTT key to answer the call and the RED LED indicator lights on; e. Wait for the Talk Permit Tone to finish (if enabled*) and speak to the MIC; f. Release the PTT key to receive the call; g. After the preset time (call hang time) is over, the call is over. (3) Receiving an all call All call is a call from an individual radio to every radio on the channel. It is used to make important announcements requiring the user’s full attention.
DP770 Instruction Manual 17/27 4. Wait the Talk Permit Tone to finish (if enabled*), and speak to the MIC; 5. Release the PTT key to receive the call. If the target radio responses the call, GREEN LED indicator lights on, the receiver’s call type, alias or ID display on the caller’s LCD screen. 6.
DP770 Instruction Manual 18/27 to select. b) The target ID/alias displays on the LCD screen, indicating that the radio check order is sending, and the RED LED indicator lights on. c) Wait for the response. d) If the target radio is active in the system, LCD displays “Target Radio Available”, or otherwise “Target Radio Not Available”.
DP770 Instruction Manual 19/27 (1) Receiving and answer the call alert When receiving call alert and the call alert decoding is enabled, the radio will automatically answer the call. The LCD screen displays the caller’s alias/ID. The radio sends out the call alert tone periodically, and the ORANGE LED indicator flashes. Press the PTT key to call back the caller, or press other keys to neglect the call alert.
DP770 Instruction Manual 20/27 During when the “Call Alert” order is sent out and the radio is waiting for the response, press , the radio will terminate the order and exit “Call Alert” mode. Or If the time to wait for the response is over, the radio will automatically exit this mode and displays “Call Alert Failed”. 3) Radio Kill/Revive This function allows one radio sending the signaling to kill another radio. The radio to be killed cannot display anything, make or receive calls.
DP770 Instruction Manual 21/27 By menu operation: In standby screen, press [Contacts] key to come to step c), or to enter the menu; a) Press b) Press , or rotate the knob to select “ contacts”, and press to select. c) Press , or rotate the knob to select “Contacts List”, and press press , or rotate the knob to select the target private call contact, press , or rotate the knob to select “Manual Dial”, and press to select. Then to select.
DP770 Instruction Manual 22/27 out, and the RED LED indicator lights on. c) Wait for the response. d) If the response is received, the LCD displays “Remote Monitor Successful”, or otherwise displays “Remote Monitor Failed”. By menu operation: In standby screen, press [Contacts] key to come to step c), or to enter the menu; a) Press b) Press , or rotate the knob to select “ contacts”, and press to select.
DP770 Instruction Manual 23/27 Emergency alarm with call Emergency alarm with voice to follow And every mode has the following types: Alarm only—After enabled the emergency alarm, the alarm sends out from the radio, but the Monitor Center could not receive any alarm signal. Regular—the radio sends out the emergency alarm, with the sound and the LED indication. Silent—the radio sends out the emergency alarm, without the sound and the LED indication.
DP770 Instruction Manual 24/27 d) Wait the Talk Permit Tone to finish (if enabled *) and speak to MIC. e) Release the PTT key to receive. If the caller responses the call, the GREEN LED indicator lights on, and the icon indicating the transmitting radio’s type, alias or ID display on the LCD. f) After the call is over, long press the programmed “Emergency Alarm” key to delete the Emergency Alarm Indication and then exit this mode. g) The radio returns to the standby screen.
DP770 Instruction Manual 25/27 the target radio’s PTT key, (the alert tone indicates that the channel is idle) which means that the channel is idle and you can answer the call. Press the PTT key to answer the call or long press the programmed “Emergency Alarm” key to end the alarm. i) The radio returns to the standby screen. If your radio sets as Silent, there is no sound or sign in Emergency alarm mode. And the radio cannot receive the response from other radios, unless you press down the PTT key.
DP770 Instruction Manual 26/27 If your radio sets as Silent with voice, there is no sound or sign in Emergency alarm mode, Hot MIC Duration or in receiving the calls from other radio, unless you press the PTT key to make a call or answer the call.
DP770 Instruction Manual 27/27 (2) Make a private call from Contacts The steps are as follows: to enter the menu; a) Press b) Press , or rotate the knob to select “ Contacts”, and press to select. c) Press , or rotate the knob to select “Contacts List”, and press press , or rotate the knob to select the target private call contact, press , or rotate the knob to select “Manual Dial”, and press to select. Then to select. Or Press target ID with the keyboard, and press to select.
