[键入公司名称] 使用说明书 XT [选取日期] [键入文档副标题]
User Manual DP405 Digital Two-way Radio User Manual DP405 Digital Two-way Radio We are very grateful for your purchasing KIRISUN brand two-way radios produced by Kirisun Communications Co., Ltd. We believe KIRISUN two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of KIRISUN two-way radio can meet your demands for reliable communication.
User Manual DP405 Digital Two-way Radio Notice to user RF Energy Exposure Information RF Energy Exposure Awareness And Control Information For Fcc Occupational Use Requirements I before using the two-way portable radio, review the following important RF energy awareness and control information and operational instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to access information in that form.
DP405 Digital Two-way Radio User Manual Federal Communications Commission Regulations Before it was marketed in the United States, the Digital portable radio was tested to ensure compliance with FCC RF energy exposure limits for two-way portable radios. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements.
User Manual DP405 Digital Two-way Radio Content 1 UNPACKING AND CHECKING ............................................................................................. 1 1.1 SUPPLIED ACCESSORIES ................................................................................................................ 1 2 2.1 BATTERY INFORMATION ................................................................................................... 2 NOTICE................................................................
DP405 Digital Two-way Radio 6 User Manual BASIC OPERATION .......................................................................................................... 10 6.1 POWER ON/OFF THE RADIO ........................................................................................................ 10 6.2 SELECTING THE CHANNEL............................................................................................................ 10 6.3 ADJUSTING THE VOLUME ............................................
DP405 Digital Two-way Radio User Manual CAUTION ................................................................................................................................
User Manual DP405 Digital Two-way Radio 1 Unpacking and Checking Please carefully open the box, and check if the accessories listed below are contained in the package. For any missed or damaged item, please contact your local dealer for solution. 1.
DP405 Digital Two-way Radio User Manual 2 Battery Information 2.1 Notice The battery is not charged before delivery, so please charge the battery for your first use. If the battery is not used for a long time or the battery is used up, please charge it before use. Charge/discharge for twice or three times alternately to achieve its optimal performance. For low battery, please charge it or replace it. Note: ◆Do not cause any short circuit on the battery or throw the battery into fire.
DP405 Digital Two-way Radio 2.2 User Manual Battery Charging (1) (2) (3) (4) (5) (6) Plug the power adaptor in the proper socket of AC power. Plug the cable of the power adaptor at the back of the socket, and the green indicator glows. Plug the battery or radio in the charger. Make sure that the battery is in proper contact with the charger terminal, and the red indicator glows. After the battery is charged for 6 hours, the red light goes out, indicating that the battery is fully charged.
DP405 Digital Two-way Radio User Manual 3 Attaching the Accessories 3.1 Attaching/Detaching the Battery ◆ Attaching the Battery (1) Slightly press the top of the belt clip as shown in ①; ◆Detaching the battery (1) For detaching the battery, please first turn off the radio. (2) Slide the battery latch along the direction as shown in ① to bounce the battery as shown in ②. (3) Slide to take out the battery along the direction as shown in ③.
DP405 Digital Two-way Radio antenna port. Turn the antenna clockwise until it is fixed. For detaching the antenna, turn it counter-clockwise. 3.3 Attaching/Detaching the Belt Clip Align the two screws on the belt clip with the screw holes at the back of the radio. Use two 2.5x6.5 machine screws. When detaching, loosen the two screws on the belt clip and remove the belt clip. 3.4 Attaching the Microphone Open the earphone cover plate on the right and connect the earphone cable to the port.
DP405 Digital Two-way Radio 4 User Manual Introduction 6
DP405 Digital Two-way Radio No. 1 2 3 4 5 6 7 8 9 10 11 7 User Manual Part Name Antenna PTT key Press this key to initiate a call and talk Side key (programmable key) This key can be set with different features by dealer. Please refer to “5 Programmable Keys” for further details Speaker Voice Output. Channel Knob Rotate the knob to select channel 1-16. Power/Volume Knob Turn it clockwise to turn on the radio. For turning off the radio, turn it counter-clockwise until a click is heard.
User Manual DP405 Digital Two-way Radio 5 Programmable Keys 5.1 Programmable Keys To suit the operation habits of customer, programmable keys (side keys) are available and can be set by dealer as shortcut key. Note: Short Press: press and release quickly. Long Press: press and hold for a while (press duration can be set by programming software) No.
User Manual DP405 Digital Two-way Radio 6 Squelch on/off Enable/Disable squelch feature. Used for receiving the weak signals on the analogue channel. 7 Squelch Level Adjusts the signal strength required when receiving. 8 Scan Enable/Disable scan feature and listens to the communication activities on other channels. 9 Alert Tone on/off Enable/disable all the alert tones. 10 Zone Selection Press this key to switch among different zones. The zones are programmed by programming software.
DP405 Digital Two-way Radio User Manual Flashes red Low battery Flashes green Channels are being scanned Flashes orange Digital call hang time and it will exit when the hang time is up Glows orange Blank channel which is not available. Switch to other channel to exit. Flashes red quickly The programming software is reading the parameters available for configuration Flashes quickly The programming software is writing the parameters which is available for configuration into the radio.
DP405 Digital Two-way Radio 6.3 User Manual Adjusting the Volume When the radio is on, rotate the power/volume knob clockwise to increase the volume and counter-clockwise to decrease the volume. 6.4 Initiating a Call Press PTT button to initiate a call to the default contact on the current channel when it is digital channel. The default contact on the current channel can be programmed by dealer. 6.5 Receiving When the radio receives the right signal on the current channel and green LED will light.
DP405 Digital Two-way Radio User Manual 7 Features and Operation 7.1 TOT (time-out-timer) TOT prevents the user from occupying the channel for too long. If the continuous transmission exceeds the duration set by dealer, the radio will stop transmitting and sound alarm. For stopping alarm, release PTT button. For transmission again, please press PTT button after a certain time interval (interval set by dealer). If the dealer set pre-alarm feature, pre-alarm will sound before TOT time is up. 7.
DP405 Digital Two-way Radio 7.5 User Manual Kill and Unkill If the dealer enables and sets Kill and Unkill, the radio is able to receive and decode the Kill/Unkill signals from other radios. After being killed, the radio cannot transmit or receive any signals but activation signal. After being activated, the radio will be back to normal state. Kill/Unkill feature is valid on digital mode. 7.6 Emergency In state of emergency, press the Emergency shortcut key to send emergency alarm.
DP405 Digital Two-way Radio User Manual from other members. Secret with Voice: after the radio enters alarm state, there will be no light or sound alert but it can receive response from other members. Note: Emergency Alarm: the radio transmits non-speech signal to trigger the alarm sent from other radios. Emergency Call: it is a call mode which is faster in occupying channel than common calls, which ensures smooth call in emergency. 7.
User Manual DP405 Digital Two-way Radio 8 Trouble shooting No. 1 2 3 15 Problem Failed to power on Small voice during call Failed to transmit or receive Cause and Solution A. The battery is used up –charge the battery or change to a new battery; B. Volume switch is faulty – repair at the specified service station; A. speaks too far from the microphone – the ideal distance: 3-10cm； B. wrong volume setting – turn the volume knob clockwise to increase the volume; A.
DP405 Digital Two-way Radio User Manual Caution 1. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2. Adapter shall be installed near the equipment and shall be easily accessible. 3. The device operating temperature range is -20~25℃. 4. The plug considered as disconnect device of adapter. 5. The device complies with RF specifications when the device used at 25mm from your front face and 0mm from your body. 6.
