User Manual 2019
Declaration The contents of this manual will be updated from time to time without prior notice; the updated content will be added to the new version of this manual. Kingwo will improve or update the products or procedures described in the manual at any time. If there is a description of the product in the manual that does not match the actual product, the actual product shall prevail. Kingwo has the final interpretation rights of this manual.
Content Chapter 1 Product Photo................................................................................................................................................. 4 Chapter 2 Product Features.............................................................................................................................................5 Chapter 3: Technical Specification..................................................................................................................................
Chapter 1 Product Photo 4
Chapter 2 Product Features 1、 No wired needed, easy for installation. 2、 This product is with built-in large-capacity disposable lithium-ion battery ,with ultra-low. self-discharge rate and extremely wide temperature adaptability.(The normal lithium battery could only work under temperature 0℃~70℃). 3、 Long working time: If upload one packet each 24 hours under GPS position priority condition, the working time can reach up to 1825 days above, no need to change battery frequently.
Chapter 3: Technical Specification 3.1 【Main Unit Parameter】 Characteristic Built in battery specification Power consumption Dimension Weight Working Temperature Humidity Frequency GNSS Description Disposable Lithium-ion battery and (3.6V,8100mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ Average working current <100mA; Power save current <15uA; 81mm*66mm*31mm(L*W*H) 185±5g -20℃~70℃ 5%~95% GPRS: 850/900/1800/1900MHz Cat.M1/Cat.NB1: LTE FDD B1/B2/B3/B4/B5/B8/B28 GPS L1:1575.
Chapter: 4 Functions 4.1【Basic function】 4.1.1 Position monitor The default setting is the terminal would send one packet each 24 hours, the packet information includes: Position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage etc, the upload interval can be configured 4.1.2 AGPS The terminal is with APGS function, when the terminal connects GPRS; AGPS is used for speeding up the position speed and improve the position accuracy 4.1.
terminal starts work next time, it will receive this command and enter into track mode, and upload the location data according to the preconfigured interval by customer until a stop tracking command is received 4.1.6 Warehouse mode The terminal can set the storage return interval, with a value range of 2880-43200 minutes. The device will upload data according to the storage return interval after setting the storage return interval.
4.1.9 Temperature detection The device built-in temperature sensor, it read the temperature first once the initialization of the machine, then will read it every 16 seconds. The temperature precision is 0.1%. 4.1.
4.2.2 Tamper alarm NT06EF: There is a removal button at the bottom, if the terminal is tampered, it will enter into activate status, and report the current location information. There is a high sensitive light sensor at the bottom, if the terminal is tampered, whether the terminal is in sleep mode, it will be activated and enter into anti-removal status and switch on anti-removal alarm, report the alarm info to the backend or preset phone number. 4.2.
4.2.
Chapter 5: NT06EF installation 5.1【Installation diagram 】 GPS green LED Solid on:GPS accurate Positioned LBS :1s on,1soff Off : Unpositioned GPRS red LED Fast blink:GPRS connecting Slow blink:GPRS Connected Solid on:Module error Battery Switch SIM cardholder Fig. 5.
5.2【Installation and debugging 】 5.2.1 SIM card installation Open the top cover of the terminal, insert the prepared SIM card into the SIM card holder, and then confirm that the SIM card button is well placed . Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number. 5.2.2 Main unit power on After installing the SIM card, turn the battery switch to the ON position. When the red light starts to flash, indicating that the terminal is powered on.
5.3.
5.3.
MS,m,s# *11*4# *22*1# *22*4# *77*0 number# *77*2 number# *88*2APN# *88*1IP*port*A# *88*3IP*port*A# Motion static detection mode, m: return interval during motion, default 60 minutes, value range 5-43 200 minutes s: static return interval, default 720 minutes, value range 5 43 200 minutes For example: ms,120,1440—return interval during motion is 120 minutes and static return interval is minutes.
Shenzhen Kingwo IoT co., LTD. Address:7th Floor, Block A, R&D Building, Tsinghua Information Hi-tech Park, Nanshan District, Shenzhen, Guangdong, China Tel:86-13537728206 Fax:86-755-86671531-8000 Website: www.kingwoiot.com Email:sales01@kingwoiot.
FCC WARNING STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.