User's Manual

QUICK START GUIDE

Product Features

1. Bluetooth technology: Bluetooth 3.0

2. The keyboard will enter power-save mode when no activity for 5-10minutes. Keyboard wakes

up with any keystroke

3. Low-power light: RED LED

4. Requires 2*AAA batteries(not included)

5. Voltage Rating: 3V DC

6. Working current: 2.3mA

7. Standby current: 370uA(max)

8. Power-saving mode current: 1.0-1.3mA

9. Bluetooth wireless range: 30ft(10m)

10. Compatible with Windows 2000/XP/Vista7/8/10/MAC/IOS/Android 3.0 and above

Installing the batteries

Requires 2*AAA batteries(not included)

1. Open battery cover located on the back(top right)

2. Insert the batteries, using proper polarity(“+”&“-”)

3. Close the battery cover

After installing the batteries, then start to Pair with your device by the following one of

steps:

Pairing with Computer and Laptops

1. Push button on back of keyboard, the Blue LED will start to flash, it shows that the keyboard

enter Pair mode. Then open the “Bluetooth Devices” item from the Control Panel. If you have a

Mac, you should open the “Bluetooth Setup Assistant” from your “System Preferences” panel

before pressing button.

2. Click “Bluetooth Devices”, then click “Add” , a dialog box will appear on your screen, Follow

the prompts to complete the keyboard setup.

3. Choose “Bluetooth Keyboard” from the “Select Devices” panel of the Bluetooth Setup

Assistant if you’re working on a Mac. You can now switch on the keyboard. After a moment, your

specific keyboard model should appear in the device list. Select it, hit “Continue” and use the

keyboard to type your password if prompted “0000”. The computer will complete the remainder

of the setup.

PAGE 1
QUICK START GUIDE Product Features 1. Bluetooth technology: Bluetooth 3.0 2. The keyboard will enter power-save mode when no activity for 5-10minutes. Keyboard wakes up with any keystroke 3. Low-power light: RED LED 4. Requires 2*AAA batteries(not included) 5. Voltage Rating: 3V DC 6. Working current: 2.3mA 7. Standby current: 370uA(max) 8. Power-saving mode current: 1.0-1.3mA 9. Bluetooth wireless range: 30ft(10m) 10. Compatible with Windows 2000/XP/Vista7/8/10/MAC/IOS/Android 3.
PAGE 2
Pairing with IOS 4.0 and later 1. With your iPad or iPhone turned on, tap the “Settings” icon. 2. In “Settings”, tap “General” and then “Bluetooth”. 3. If the on-screen switch beside “Bluetooth” doesn’t currently show as “ON”, tap it once to enable it. 4. Press the Bluetooth button on the back of the keyboard, the Blue LED will start to flash, it shows that the keyboard enter Pair mode. 5. In the Devices list, tap “Bluetooth Keyboard” to pair it. 6.
PAGE 3
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.