User Manual

KT05 manual for metal two key remote control

1 Product parameters

Main technical indicators:

Working voltage: DC 3V

Working current: < 12mA

Operating frequency: 433MHz

Transmission power: ≥ 10MW

Reference distance: 50m (no interference in open)

Frequency deviation: ± 0.2MHz

Transmission rate: 50-60khz

Appearance dimension: 60 * 31 * 11mm

Oscillation resistance: according to the needs of guests

Coding method: 1527 learning code (the first key is)

Battery model: cr2016 2

Each remote control has an independent address code, so the remote controller is a separate

individual, which will not cause mutual interference.

Scope of application

Home and shopping mall alarm; Electric vehicle, automobile, motorcycle alarm, various door and

window controller and other industrial control

2 instructions

press the remote control key to turn on the LED light of the remote control, and the code issuing

is successful.

3 matters needing attention

PAGE 1
KT05 manual for metal two key remote control 1 Product parameters Main technical indicators: Working voltage: DC 3V Working current: < 12mA Operating frequency: 433MHz Transmission power: ≥ 10MW Reference distance: 50m (no interference in open) Frequency deviation: ± 0.
PAGE 2
1)please follow the battery replacement in time when the remote control voltage is insufficient (when the battery voltage of remote control is insufficient, the distance of remote control will be closer generally). 2) when using wireless electronic products, it is necessary to avoid metal mask, large-scale electronic equipment, electromagnetic field and other strong interference sources, so as to avoid short distance between remote control and receiving or failure to work normally.
PAGE 3
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.