User's Manual

Product Introduction
Fixed Tone Setting
Tracks R eturn to The First Song
Total Clear ance
Doorbel l
Volume Setting
Chime Setting
Ordinary Doorbel l and Butt on P airing
Technical P arameters
Package
Features
Wireless Door bell
User Manual
The wireless doorbell uses advanc ed wireless
reception technology , high-quality voice
processing technology, and integrates up to 32
musics. Suitable f or apartmen ts, villas, storefronts,
hotels, hotels, homes, oc e buildings, conference
rooms, etc.
④ Short press【 】: Loop tones in sequenc e and
play the current tones.
⑤ Long press 【 】 : Change tones loop
direction.
① Short press【 】 to select one tone, long
press the 【 】and【 】
② the doorbell beeps onc e, indicating that the
pairing state is en tered. then press the button, the
doorbell ashes once and beeps twic e.
③ Press the button, doorbell ashed onc e and
beeps onc e, it is done.
Press and hold the 【 】 button to power on,
the doorbell host will turn on after beeps ve
sounds, indic ating that the doorbell host will
restore the track to the rst song, and all the
buttons are not deleted.
Press and hold the 【 】 button to power on, the
host "beeps, beeps... " 10 sounds and the LED
white light ashes 10 times quickly, indicating that
all accessories ar e deleted, and the doorbell host
returns to the f actory settings.
Doobell receiver(s)
Transmitter button(s)
Double sided adhesive tape( s)
Warranty card
Secrui Manual
* 32 musics optional
* Adjustable volume 5 level (including mute )
* Memory function, and the voic e for each boot
is the last shutdown setting.
* Dazzling colorful lights
Ringtone
Volume
Button
Press and hold the 【 】key 1s: cycle to set the
volume level (the main unit will be power ed o
and then re-power ed, the volume will be
automatically adjusted to the maximum )
② Trig the doorbell .it pla y the voice means it is
working normally.
When the doorbell is in pairing state,short pr ess
any key on the doorbell r eceivers or leave it
20sec onds without an y operation, the doorbell
will exit the pairing state.
① Plug the doorbell in to the AC
outlet, and the doorbell host
beeps onc e, The LED indic ates
that the color light ashes
cyclically, indicating that the
doorbell is power on and working
properly.
③ Trig the button. The doorbell has no r esponse,
Please r e-match the doorbell and button.
Note:
The doorbell will beeps twic e, then pr ess button
again, the doorbell ashes once and beeps onc e
.means , match is done.
Note: if you need t o pa ir other doorbel l buttons,
please pa ir them in the same way.
* Working voltage: 100～240V 50 ～60Hz A C
* Standby current: <3mA (220V AC)
* Working current: <11mA (220V AC)
* Wireless fr equency: 433MHZ
* Wireless distanc e: 150m ( in open air )
Long Press 5S
Long Press ﹥5S
Short press﹤1S
Short press button
Beeps onc e indicate
that the pairing state
is entered.
Led indic ator turns to white
①
②