Instruction Manual

ManualsBrandsShenzhen Kafulle Electronics ManualsElectronics4 USB wireless charger

4 USB wireless charger KF-9201

Instruction Manual

7141-20

1 x Lunation Wireless Charging Station 1

x 1.2m AC Removable Power Cable

1 x Instruction Manual

Input power: AC 100-240V 50-60HZ USB

Outputs: 5V/2.4A max, total 5.4A.

Wireless Output: DC 5V/1A

Long press the LED Nightlight to turn light

ON, repeat to turn the light OFF.

Connecting charging station:

Take provided AC removable power

cable, insert cable into the power cable

inport on the charging station.

Once connected to the charging station,

plug in power cable to wall power source.

Charging mobile phones and other

electronic devices:

The charging station has 4xUSB output

ports,with a maximum out 2.4A

Connect the desired cable to your mobile

phone/device using the appropriate

connector. Connect the other end of the

charging station.

Remove desired cable from your mobile

device when it is fully charged. Charging

Mobile phones and other electronic

devices with wireless output. Place

wireless charging enable device on

Wireless Charging Pad by setting device

on the phone stand. It will automatically

charge.

Note: In order to charge devices, use only

Summary of content (4 pages)

PAGE 1
4 USB wireless charger KF-9201 Instruction Manual 7141-20 1 x Lunation Wireless Charging Station 1 x 1.2m AC Removable Power Cable 1 x Instruction Manual Input power: AC 100-240V 50-60HZ USB Outputs: 5V/2.4A max, total 5.4A. Wireless Output: DC 5V/1A Long press the LED Nightlight to turn light ON, repeat to turn the light OFF. Connecting charging station: Take provided AC removable power cable, insert cable into the power cable inport on the charging station.
PAGE 2
the accessory cable or the cable included with your own device by the manufacturer. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 3
repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
PAGE 4
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.