support@chekoh.
support@chekoh.net Contents Part 1 – Product Details 03 Part 2 – Notice Before Using The Camera 04 Part 3 – Starting Using The Camera 05 3.1 Connect The Power 05 3.2 Download The "Chekoh" App 05 3.3 Account Sign Up (On Chekoh App) 06 3.4 Add Device 06 3.5 How To Use The App 07 3.6 Install The Camera On The Wall 10 Part 4 – Camera Management 11 4.1 Add New Camera 11 4.2 Editing The Camera Information 14 4.3 Delete Camera 15 4.4 Reset Camera 15 4.
support@chekoh.net Part 7 – Alarm Setting 25 7.1 How To Turn On The Alarm 25 7.2 Motion Alarm 26 7.3 Flood Light 26 7.4 Camera Alarm Area Setting 27 7.5 Motion Sensitivity 28 7.6 Disable/Enable Push Notification 29 Part 8 – Video Lock 30 Part 9 – SD Card 32 9.1 Local Storage 32 9.2 SD Card Statue In Setting 32 9.
support@chekoh.
support@chekoh.net Part 2 – Notice Before Using The Camera NOTICE Before Starting Using Chekoh Hercules! ⊲ When start to add the camera to the Wi-Fi network, please make sure it’s under a full (You can test with your smartphone) Wi-Fi signal. ⊲ Make sure connect the device to your smartphone (successfully monitored on app) before installing on the wall. ⊲ This camera only supports 2.4GHz Wi-Fi router. Please make sure you are using 2.4GHz Wi-Fi router (the same as the smartphone).
support@chekoh.net Part 3 – Starting Using The Camera Now Let Start Using the Chekoh Hercules! 3.1 Connect The Power 1. It takes 30 seconds to get ready after connecting the power. The camera will stay silent during this 30 seconds. 2. When the camera is starting, it will turn up and down, right and left for 3-5 seconds. We suggest holding the camera when it's starting. 3.
support@chekoh.net 3. For New user, Please Select 'Agree' To The Tips Pop-Up 1). Allow Chekoh to access mobile cellular data and wireless LAN, otherwise you cannot add camera. 2). Allow Chekoh to receive pushed messages, otherwise the phone will not receive an alarm push message. 3). Allow Chekoh to use the microphone when you want to use 2 way audio function. 3.3 Account Sign Up (On Chekoh App) 1. Open the app and click Sign up. 2. Enter your email or phone number, click send verification code. 3.
support@chekoh.net Use the reset needle (can be found in the package) to hold the reset button for several seconds, until you hear deng~deng~deng~ prompt voice means the camera has been reset successfully. If you still can’t bind the camera, please contact us for more advises. 3.5 How To Use The App Press anywhere on the camera screen to enter the Live View.
support@chekoh.net Tap this icon to enter the full-screen mode. Tap this icon to enable or disable audio. Tap this icon to modify the image quality. Tap this icon to adjust the monitoring area. Tap this icon to enter the 1/4windows division menu. Tap this icon to record live video. Long press this icon to start a conversation. Tap this icon to take a photo of the live view. Please read the manual to learn more about how to use our product.
support@chekoh.net * Insert Micro SD Card (not included) Tip: Video playback function requires a micro SD card inserted. Open the bottom micro SD Card slot cover. Insert a micro SD card 8G, 16G and 32G micro SD cards, the format must be FAT32. 64G, 128G micro SD cards, the format must be exFAT format. Note: Please power off the camera when inserting the micro SD card.
support@chekoh.net 3.6 Install The Camera On The Wall Paste the drilling location mark on the wall, then drill the hole according to the mark and Insert the anchors, pass the screws through the back of the bracket, and fix the top of the bracket on the wall. Wall Anchors Screws Drilling Location Mark 1. Mark Position Place the mounting template where you want the camera. For wall mounting, drill four holes through four circles. 2. Mount Camera Affix the camera base using the screws.
support@chekoh.net Part 4 – Camera Management After the camera is powered on, wait for about 30 seconds, the camera rotates left and right up and down to complete the self-check. 4.1 Add New Camera Pay attention to the following points before add the camera in the app. (For new users) 1. Please use supplied power adapter, and make sure your router is working properly. 2. Please add a camera when the Wi-Fi signal is full. 3.
support@chekoh.net 5 Follow the instructions on the screen and aim the QR code at the camera lens, the distance is about 6-8 inch (15-20 cm), and keep the phone still.
support@chekoh.net 6 Wait for 10-60 seconds during the binding and configuration. 7 The device is connecting to the network. After successful addition, you will hear "binding successful".
support@chekoh.net 4.2 Editing The Camera Information To modify your camera name, please follow the steps below: 1. Click 'Setting' > 'Camera information' > 'Name'. 2. You can change the camera name in the field, then enter the name and click 'OK' to save.
support@chekoh.net 4.3 Delete Camera Tap 'Setting' and choose 'Delete' on the screen. Enter the login password for your account and click 'OK' to delete. 4.4 Reset Camera To rest the camera, use the provided reset needle to hold the reset button for several seconds, until you hear "deng~deng~deng~" prompt voice means the camera has been reset successfully.
support@chekoh.net 4.5 Image Flip When you need to flip the camera, you can flip it in the APP setting screen Step: Click the 'Setting' > ' Image flip' > Option the camera put way > Click 'OK' to save.
support@chekoh.net Part 5 – Live Viewing To view the live video source, press anywhere on the camera screen to enter the Live View. Tap this icon to enter the full-screen mode. Tap this icon to enable or disable audio. Tap this icon to modify the image quality. Tap this icon to adjust the monitoring area. Tap this icon to enter the 1/4windows division menu. Tap this icon to record live video. Long press this icon to start a conversation. Tap this icon to take a photo of the live view.
support@chekoh.net 5.1 Manually Adjust The Camera Monitoring Area 1. Tap this icon to open the operation panel. 2. Press and hold the orange area , drag the orange dot to the direction you want to adjust, adjust to a suitable screen, and release your finger. 3. Click this icon live view. again to return to the 5.2 Two-way Audio Two-way audio allows you to talk and listen. Follow the steps below to enable it: 1. Long press this icon to turn blue and wait for the icon Now you can talk with the camera.
support@chekoh.net 5.3 Video Quality In the tab, you can click 'HD', 'SD' or 'smooth' to select the video stream type according to your needs. Note: 1.SD: By default, the live video will stream in SD. 2.HD: The highest-quality stream, clear stream has the highest quality of picture, but it also consume more bandwidth. 3.Smooth: Lower quality streams consume less bandwidth.
support@chekoh.net 5.4 Record Live Video/Take Pictures Record live video 1. Click this icon , when the icon turn into this again, the recording ends. , indicating that it is recording, click 2. The recording time is displayed on the screen, and the video is stored in your phone.
support@chekoh.net Note: You can view the recorded video in the phone album or APP album. Take live photos 1. Tap this icon to take a live view photo. The photos are stored in your phone. 2. You can view the recorded video in the phone album or APP album.
support@chekoh.net 5.5 Multi-person Sharing Each camera can be managed by several Chekoh app. The camera can be shared with up to 14 accounts for simultaneous viewing. 1. After you setup the camera connected to your home Wi-Fi, go to setting page. 2. Tap 'setting' > 'Sub-account management' > Enter the sharer's account and save. 3. The sub-account can use all the functions of the real-time video page. 4. The sub-account can NOT change the settings.
support@chekoh.net Part 6 – Playback This part will cover how to play back the videos recorded to your Micro SD card. Playback is only available when the SD card is inserted and recognized by the camera. 6.1 How To View Video Playback 1. Tap to enter the playback page. 2. Scroll to select the start time of the video and click 'OK' to confirm. 3. Tap this icon to enter the full-screen mode. 4. Drag this icon to quickly select the start time of the video. 5.
support@chekoh.net 6.2 Set Recording Video Quality You can set the quality of the recorded video in the APP. Please follow the steps below Steps: Go to 'Settings' > 'Video storage' > Choose the picture quality you need. Note: You can set the recording video quality and real-time image quality separately, they are different functions. HD quality occupies the highest memory, Smooth occupies the lowest memory.
support@chekoh.net Part 7 – Alarm Setting When the system detects a movement change, it will trigger an alarm and prompt the camera to take the following actions: sound an alarm, push a notification to your smartphone, and record the movement to your Micro SD card. 7.1 How To Turn On The Alarm Steps: Go to 'Settings' > 'Alarm' To enable the alarm, tap the icon , change it to 25 . To disable it, tap the icon again.
support@chekoh.net 7.2 Motion Alarm Steps: Go to 'Settings' > 'Alarm' >turn on 'Alarm' >turn on 'Alarm Siren' > Setting 'Opening time'. Set the alarm time according to your needs. During the opening time, if movement is detected, the camera will sound an alarm. 7.3 Flood Light The flood light function has two modes: ' Flood Light' and ' Turn on Flood light with alarm'. Set an alarm schedule and turn on Flood light with alarm.
support@chekoh.net 7.4 Camera Alarm Area Setting Set up key monitoring areas, such as windows, swimming pools, gates, etc. When someone enters the areas, the alarm will sound, and the APP will push notifications to your smartphone. The camera will record movement on your micro SD card. If people or animals enter the non-monitoring areas, the alarm will not sound. Steps: Go to 'Settings' > 'Alarm' > 'Camera alarm area' >Drag the red frame to adjust the alarm area> Save Settings.
support@chekoh.net 7.5 Motion Sensitivity The camera has 3 types motion sensitivity Sensitivity Low Detecting Distance (for Detecting Distance (for moving and living things) moving vehicles) Up to 4 meters (13ft) Up to 10 meters (33ft) Mid Up to 6 meters (20ft) Up to 12 meters (40ft) High Up to 9 meters (30ft) Up to 15 meters (50ft) Note: Higher sensitivity offers longer detecting distance, but it would lead to more false alarms. We advise setting the sensitivity level to 'low' or 'Default'.
support@chekoh.net 7.6 Disable/Enable Push Notification Receive alarm information on your smartphone, please open 'Allow notifications' on the APP. There are two ways to open: Way 1: Go to 'Settings' > 'Notifications' on your smartphone, and then click Chekoh App to allow notifications. Way 2: Click 'setting' on the camera management page and follow the icon.
support@chekoh.net Part 8 – Video Lock This chapter will cover how to set video lock in APP. When you turn on the camera, you need to enter a gesture to open it to better protect your privacy. Step: Go to 'Settings' > 'Video lock' > 'Create video lock' > Draw gesture > Draw gesture again > Click 'OK' to save. After the setting is completed, a lock symbol management page.
support@chekoh.
support@chekoh.net Part 9 – SD Card 9.1 Local Storage Chekoh cameras support SD card storage (default 24/7 recording). If you don’t need it, you can choose to turn off this feature. There are three emotional modes for the resolution of locally stored videos: smooth / SD / HD, smooth is the most space-saving, and HD is the clearest. 9.2 SD Card Statue In Setting 1. It shows "Not inserted" if the SD card is not inserted or can’t be detected. 2.
support@chekoh.net (2) When the SD card space is almost full, the oldest videos will be deleted automatically, freeing up some space to store new videos, no need to replace the micro SD card. (3) The card's reading and writing speed must be higher than c6+. If the speed is lower than this, the camera will not be able to record or slow down. 2. The camera cannot recognize micro SD card (1) 8G, 16G and 32G micro SD cards, the format must be FAT32.
support@chekoh.net View all the devices under your account, click on the device, the right window will display the device. Click this icon to switch window display type. Close selected window. Click this icon to modify the picture quality. Click this icon to set alarm information. Click to see the cameras on the next page or previous page. Click this icon to change the screen orientation. Click this icon to take a real-time picture. Click this icon to open the screen sound.
support@chekoh.net Part 11 – Specification Product Name Chekoh Hercules Model B1 APP Chekoh Power 12V/1A Power Cable Length 1.5m WiFi Frequency Bands Support 802.11b/g/n 2.
support@chekoh.net Plastic Parts (Panek) O O O O O O Circuit Board O O O O O O Fastener O O O O O O O O O O O O Wire and Cable/Ac Adapter Packing Material O O O O O O Accessories O O O O O O O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.
support@chekoh.net Part 14 – FAQ 1. Why can't I always add devices? 1) Please restore the device to factory settings (Please refer to the User Manual 15 Page for the reset method). 2) When adding a camera, please make sure your phone is connected to 2.4GHz Wi-Fi, our Wi-Fi camera does not support 5G Wi-Fi. 3) Please enter the correct WI-FI password. The password should be less than 30 characters and cannot contain any symbols, such as #*/.
support@chekoh.net 4. Why is there no video recorded? 1) Please confirm whether the camera is powered off, the SD card is working normally, and the SD card will not continue to record after the device is powered off. 2) Verify that the SD card is correctly inserted into the camera: Without a Micro SD card, the camera can work but cannot record video, and can accept notifications, but cannot view the alarm video. After inserting the card for 10 minutes, you can click to view the video to play.
support@chekoh.net Part 15 – Warranty & Technical Support Visit chekoh.net/register or scan the QR code Register NOW to make sure your product is under the life-time NRRR protection! Just let us know if you have any issue with the product by contacting us at support@chekoh.net Registration is only valid in 15 days after receiving your product. * All rights reserved by Chekoh Dear Users: Thank you for purchasing Chekoh products.
support@chekoh.net The content in this manual only provides guidance for users. Our company will update the content of this manual according to the enhancement or change of product functions. And will regularly improve and update the software functions described in this manual, the updated content will be reflected in the new version of the manual without notice. Technical Support & Software Upgrade Service How to get our technical support 1. Starting a live chat at chekoh.
https://bit.ly/chekohfb https://bit.ly/chekohyt https://bit.ly/chekohins https://bit.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.