行车记录仪使用说明书 Instructions for the Use of Traffic Recorder 產品特性: 单路 4K 档案与档案之间无间缝不漏秒 2.
产品说明 产品结构 1)工作指示灯 5)TF 卡插槽 9)摄像头 2)菜单/模式键 6)复位孔 10)喇叭 3)向上键 7)USB 电源接口 11)后拉摄像头接口 一:按键及功能说明 1)工作指示灯 开机后蓝色指示灯点亮,录像时蓝色指示灯闪烁; 2)菜单键/模式键 短按此键调出功能设置菜单;连续短按此键可以在各设置间相互切换; 录像过程中短按此键会对当前视频文件加锁,保存为不可删除文件 长按此键在摄像/拍照/回放之间相互切换; 3)向上键 菜单选项中向上选择功能键; 回放状态下此键为快退功能; 待机状态下短按打开/关闭 WIFI 4)向下键 菜单选项中向下选择功能键; 回放状态下此键为快进功能 录像过程中长按打开或关闭录音功能; 5)TF 卡插槽 存储卡插槽 6)复位孔 死机复位按键 4)向下键 8)电源键 12)OK 键
7)USB 电源接口 ①用于连接外接电源给电池充电或提供工作电源; ②用于连接 GPS 8)电源键 短按开机长按关机; 9)摄像头 取景窗口 10)喇叭 播放视频或者有声文件的扩音孔,操作音提醒 11)后拉摄像头接口 后视镜头视频输入口(请注意:单路机器不支持后拉功能) 12)OK 键 录像和拍照确认键,摄像模式下,短按此键开始录像,再次短按停止录像;拍照模式下短按此 键拍摄照片;菜单模式下为确认键 二:特别功能说明 1)G-sensor 功能 当重力加速(1g=9.
模式,此时屏上会出现 WIFI 打开图标,屏上会显示 SSID 热点名称及 PWA2 密码 3)打开手机上的 WiFi 连接,手机会自动搜索 WiFi 热点,搜到 SSID 热点名称为 NVT******输入 密码 12345678(初始密码默认为:12345678)点击连接; 4)连上 WiFi 后就可以点开事先下载好安装好的 APP(Roadcam)程序。 5)打开 APP 程序后,点击下面的黄色的摄像头图标进行连接如下图: 6) 连接成功后将看到记录仪的实时画面如下图:
1.记录仪功能设置 2.断开设备连接 3.录像时间 4.图片回放 5.摄像 6.视频回放 7.拍照 四:APP 界面图标使用说明: 1.记录仪功能设置图标 :点击进入记录仪里面设置各项菜单功能 2.断开设备连接:点击可以断开 APP 与设备连接 3.录像时间:录像的显示时间 4.图片回放:点击进入可在线阅览拍照图片,并可以下载到手机进行分享 5.摄像:点击可以进行录像或停止 6.
短按菜单/模式键调出设定菜单; 通过短按向上或向下键,可以在各设置项中循环上下选择; 选择需要更改的设置项,通过短按 OK 键进入更改; 6)退出设定菜单 短按菜单/模式键退出设置状态; 六:时间设置 (1)通过连续短按菜单/模式键进入设置项,短按向下键选择日期设置,短按 OK 键进入,短按 OK 键可以在年/月/日/时/分/秒之间相互切换,通过向上键/向下键调整需要数值,短按 OK 键确 认修改,再短按菜单模式键退出时间设置。 (2)当机器连接 WiFi 后,时间会自动更新 备注: 当使用此产品因操作不当引起当机现象,可按复位键后再开机,即可恢复正常。 七:安装指南 1.关闭汽车发动机。 2.将 TF 卡插入记录仪卡槽中。 【注意】请使用高速 TF 卡(C10 以上) 3.将记录仪固定于汽车的前挡风玻璃上。 4.将车载充电器插入汽车点烟器中。 5.用充电延长线将记录仪的 USB 接口和车载充电器连接起来。 【注意】布线时可将充电延长线沿汽车挡风玻璃边缘敷设。 6.调整镜头位置,确保镜头与地面保持水平。 7.
3.
十:产品规格 产品特点 G-sensor 液晶显示屏尺寸 高清摄像头,高清录像 内置(车子意外情况下紧急保存,不被删除) 2.0 寸 镜头 140 度广角镜头 语言 文件格式 录像分辨率 视频编码格式 随车开关机 年月日分 存储卡 照相模式 支持多国语言 MP4 4K/ 2K/ 1080P 4K/H.265 2K/H.264 1080P/H.264 支持汽车打火开机,熄火延时关机 支持 TF (最大支持 128GB) 1400 万 照片格式 JPEG 麦克风 支持 WIFI 功能 支持手机连接 声控功能 支持 GPS 支持 电源接口 5V/1.
Product Features: Single way 4K Seamless seconds between records and records 2.
Product description Product structure 1) Work indicator 2) Menu / mode key 3) Up key 4) Down key 5) TF card slot 6) Reset hole 7) USB Power Interface 8) Power key 9) Camera 10) Horn 11) Pull back camera interface 12) OK key 一: Key and function description 1) Work indicator After power on, the blue indicator lights up and flashes when recording; 2) Menu key / mode key Press this key to call up the function setting menu; Press this key continuously for a short time to switch between settings; In the proc
6)Reset hole Crash reset button 7)USB Power Interface ① It is used to connect external power supply to charge battery or provide working power; ② For connecting to GPS 8) Power key Short press power on and long press power off; 9) Camera Viewfinder 10) Horn Play video or audio file's amplifying hole, operate audio reminder 11) Pull back camera interface Rear view lens video input port(Please note that: single channel machines do not support pull back function) 12) OK key In the camera mode, short press this
三: Application installation and WiFi connection instructions: 1)For Android smart machine, please go to the software store to search roadcam directly to download and install. For IOS smart machine or iPad, please go to the software store Apple store directly searches roadcam to download and install. 2) In the standby mode, press the menu key to enter the menu option, select the WiFi function option and press OK key to enter the WiFi mode.
1. Recorder function setting 2. Disconnect the device 3. Recording time 4. Picture playback 5. Camera 6. Video playback 7.photograph 四:App interface icon instructions: 1. Recorder function setting Icon: Click to enter the recorder to set various menu functions 2. Disconnect the device: Click to disconnect the app from the device 3. Recording time: the display time of the recording 4. Picture playback: Click to view the pictures online and download them to the mobile phone for sharing 5.
2) Camera mode Press menu / mode key for a long time to switch to camera mode, press OK key to start shooting, video icon will start flashing, and blue indicator light starts flashing to enter video working mode; 3) Photo mode Press menu / mode key for a long time to switch to photo mode, press OK key for photo taking, and the screen flashes once during taking photos, indicating that the photo is completed.
light flashes. Please note that the screen on the display is normal. 八:GPS track map player download (matching) 1.PC version enters website http://www.sunningsoft.com/en/pcgps.html Download Remarks: system requirements: 1 windows 7/8/10 operating system, 64 bits, 32 bits; (windows XP does not support) 2. Mac OS system directly in the mall search: GXplayer download and install. After downloading and installing, the following interface appears when opening the player: 3.
九:voice command turn_on_WIFI take_Picture open_Screen turn_off_Recording turn_off_WIFI open_Recording lock_the_Video turn_off_Display 十:Product Specification Product High Definition Camera, High Definition Video characteristics G-sensor Built-in (car emergency save, not deleted) LCD Display Size 2.0inch 140 degree wide angle lens Camera lens language file format Video Resolution Video encoding format On-board switch Support for Multilingualism MP4 4K/ 2K/ 1080P 4K/H.265 2K/H.264 1080P/H.
voice control Support GPS Support Power Interface 5V/ 1.5A 十一:Trouble shooting: If you experience problems with operation,please try the following: Check if the TF card has enough storage or if it is locked. Automatically stops when recording: Use compatible high-speed TF card with SDHC.A large amount of HD video data requires a high-speed TF card,type C10. There are file errors when replaying a photo or video Incomplete files due to TF card storage error.Use formatting function to format your card.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.