NOSTALGIA MUSIC COMBO MODEL:BT5017MO PLEASE READ THIS INSTRUCTIONS CAREFULLY BEFORE OPERATION AND KEEP IT FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instruction carefully, please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. Read these instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions – The safety and operating instructions should be kept for future reference. 3.
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
BEFORE USING THE UNIT Read this before attempting any operations ●As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. ●The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. ●Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat.
towards the outer edge) with a soft dry cloth: ●Never use such chemicals as record sprays, anti-static sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface. ●Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to “skip”. ●Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperatures will warp the disc.
HANDLING RECORDS ●Do not touch the record’s grooves. Only handle records by the edges or the label. Make sure your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record. ●Keep your records away from dust. Keep them in a cool, dry place. ●To avoid dust and scratches, keep records in their sleeves and jackets when not in use. ●Store records upright on their edges.
Caution: ●Do not remove or bend the stylus. ●To avoid injury, do not touch the needle. ●Turn off the unit’s power before you replace the stylus. ●Keep out of the reach of the children. ●Handle with care, as the stylus is delicate. Use of a bent or broken stylus may damage the record and cause the turntable to malfunction. ●Do not expose stylus to extreme heat. ●Contact a qualified repair company if you experience difficulty in changing the stylus. Removing an old stylus 1.
PARTS OF TURNTABLE a: turntable b: screw fixing the turntable for transportation Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver. When you transport the unit, turn the screw counterclockwise to secure the turntable. c: cue-lever, use this lever to the tone arm.
‐ 10 ‐
1. Speaker 2. Machine Feet 3. LED Light 4. FM LED light: In FM mode the LED light will light when a stereo station received. 5. Tuning Knob: Turn the knob to tune in the FM/AM station. 6. Function Knob ●Turn the knob to RADIO to listen to radio. ●Turn the knob to PHONO/AUX to play through an audio device or a record. ●Turn the knob to (Bluetooth) to listen through Bluetooth. ●Turn the knob to CD to play a CD. 7. Volume Knob: Swivel to adjust volume. 8.
LISTENING TO THE RADIO 1. Press the POWER button to turn the unit ON. 2. Set the function knob to the RADIO in position. 3. Switch the AM/FM button to select AM or FM. 4. Turn the tuning knob slowly to receive station. 5. In FM mode, the LED indicator of FM will light up when a stereo station tuned in. 6. Turn the VOLUME knob to adjust the volume. NOTE: If the reception is poor, fully extend the antenna or relocate the unit to get best signal. AUX IN AND AUX OUT AUX IN 1.
7. Raise the cue lever to lift the tone arm off the tone arm support. 8. Move the tone arm gently to the edge of the record(or the starting point of a track). The turntable will begin to turn. 9. Gently lower the tone arm by slowly releasing the cue lever. You can lower the tone arm manually if the cue lever has not been raised. 10.Turn the VOLUME knob to adjust the volume. 11. When playback has finished, slightly lift the tone arm by using the cue lever and return it to the tone arm holder.
LISTENING THROUGH BLUETOOTH NOTE: The external Bluetooth enabled device can be automatically connected with the unit after first time pairing. 1. Press the POWER button to turn the unit ON. 2. Set the function knob to the (Bluetooth) in position, and the Bluetooth indicator lights up, and the letter “”bt” will appear on display. 3. Ensure that the Bluetooth function is activated in your player(e.g. Mobile phone). Set your external device to search to pair.
During playing: ●To pause playing: press the PAUSE button during playing to pause. Press PLAY button to resume playing. ●To stop playing: press the STOP button to stop playing, press PLAY button to resume playing. ●To skip track: press the SKIP + or SKIP - button to skip to next or previous track. ●To fast forward or backward : press and hold the SKIP + or SKIP - button and release it. ●To skip to next 10 tracks : press + 10 button and release it. ●To play randomly: press RANDOM button and release it.
TROUBLESHOOTING If you experience any problems with the unit, please take a moment to look through this chart and see if you can solve the problem yourself before calling for help. NO POWER Check the connection to AC power source. Check and make sure the AC power source is not a switched outlet and if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan. NO SOUND Adjust the volume.
another disc. ●The unit will not play the un-finalized CD-R/CD-RW discs. Finalize such a disc in a CD recorder and try again. DISTORTED OR NOISY SOUND ●Clean and demagnetize the heads. ●Use normal tape. BEAWARE OF CONDENSATION When the unit(or a record/disc) is moved from a cold to warm place, or used after a sudden temperature change, there is the danger of condensation, vapor in the air could condense on the internal mechanism, making correct operation erratic or impossible.
SPECIFICATION Amplifier section Output power..........................................................................................2W+2W Frequency response................................................................60Hz to20,000Hz CD player section Frequency response............................................20Hz to20,000Hz(+1dB/-1dB) Tuner section Frequency range(FM)............................................................88MHz to 108MHz Frequency range(AM).......................................