2.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
To assure continued operation, follow the attached installation instructions and use only shielded cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Warning -To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Product the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments / accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
POWER SOURCE 1. Insert the plug from the supplied AC/DC Adapter to the DC In Jack on the rear of unit. 2. Insert the small plug from the supplied Adapter to the AC In Jack on the AC/DC Adapter. 3. Insert the Adapter Plug from the supplied to the wall outlet having AC100-240V~; 50/60Hz. NOTE:If Long period of time will not use the unit, unplug the Adapter Cord from the wall outlet. INSTALLATION 1.The unit can be disassembled into two parts as the figure below: 2.
MOUNTING 2.1 Mounting on the wooden wall You may use 2 pieces screws (Included) 1. Mark the position of the mounting screws on the wall using a pencil. 2. Drill the supplied screws directly into the marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar. 3. Put the sound bar onto the mounting screws. Make sure they are firm and stable. 2.2 Mounting on the concrete/brick wall You may use 2 pieces screws (Included) 2 pieces plastic inserts (Included) 1.
LOCATION OF CONTROLS Front View Top View Rear View
LOCATION OF CONTROLS-REMOTE CONTROL 1. ( Power On/Off ) Button (For main unit) 2. MO/ST ( Mono/Stereo ) Button 3. TUNE-/ TUNE+/ ( Skip Backward ) Button ( Skip Forward ) Button 6. 7. ( Power On/Off ) Button (For subwoofer) ( Mute ) Button 8. BASS -/+ Button 4. TREBLE -/+ Button 9. SOURCE button 5. 10.
BATTERY INSTALLATION ( REMOTE CONTROL) ---First time using Remove and discard the insulation tab as the figure on right. ----Replacing battery for remote control 1. Push and slide out the battery trap as the figure below and the rear of the remote control. 2. Replace the battery by a new CR2025 button cell with the polarity “+” facing up as the figure below and the rear of remote control. 3. Close the battery tray. BATTERY PRECAUTIONS Follow these precautions when using a battery in this device: 1.
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER NOTES: --when there is an obstacle between the unit and the transmitter may not operate. --when direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the unit, the remote operation may be unstable. GENERAL OPERATION 1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. The red indicator will light but unit is OFF and in standby mode.
LISTEN TO FM RADIO - Search and store the stations 1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. 2. Press the Standby/Source button on the unit or press the SOURCE button on the remote control until the indicator turns Green. 3.To search the band manually: / TUNE + or /TUNE - button to search the bands back and forth Press the manually. 4.
BLUETOOTH PAIRING AND PLAYBACK Bluetooth In first time use or re-pairing to new BT Device, pairing the unit to the external BT Device as follows: 1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. 2. Press the Standby/Source button on the unit or press the SOURCE button on the remote control until the indicator turns Blue. 3. Power on the external BT Device and enter to searching mode.
AUX IN 1:LISTEN TO TV/DVD/VCR/DVR 1. Connect the Aux out jacks from the external audio player (such like TV, DVD player, VCR …etc.) to the AUX IN 1 jacks on the rear of unit by the RCA Connection Cable as the figure below: 2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. 3. Press the Standby/Source button on unit or press the SOURCE button on remote control repeatedly until the Indicator turns Violet. 4.
AUX IN 2:LISTEN TO EXTERNAL AUDIO DEVICES 1.Connect the Headphone/Earphone; Aux out jack or Line out jack from the external audio player (such like MP3 player; Disc-man … etc) to the AUX IN 2 jack on the rear of unit by the Audio Connection Cable as the figure below: 2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. 3. Press the Standby/Source button on unit or press the SOURCE button on remote control repeatedly until the Indicator turns Orange.
CONNECTION THROUGH OPTICAL 1. Connect the Optical out jack from the external audio player (such like TV, DVD player …etc.) to the OPTICAL IN jack on the rear of unit by the Optical Connection Cable as the figure below: 2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. 3. Press the Standby/Source button on unit or press the SOURCE button on remote control repeatedly until the Indicator turns Cyan. 4.
TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power AC/DC adapter not connected Connect the power AC/DC adapter. The unit is in Standby mode Press the button to turn on the unit. Volume in minimum position Raise volume level by pressing the VOL (Volume) + button. The paired/connected device is not in payback mode Play music/movie in the paired/connected device as usual and make sure the volume level of it is in high level.
GENERAL SPECIFICATIONS Power Source of the Main Unit........................................................... DC 12V Power Source of the Subwoofer..................................................... DC 24V 2A 2.5A Radio Coverage.............................................................................................87.5-108 MHz Impedance of Speakers: Loud Speakers .......................................................................................... 8 Ohm,10 W x 2 Woofer .......................
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shipping and handling costs) payable to Craig Electronics Inc.